The Effects of Ventilatory Pattern on Hyperinflation, Airway Pressures, and Circulation in Mechanical Ventilation of Patients with Severe Air-Flow Obstruction

1987 ◽  
Vol 136 (4) ◽  
pp. 872-879 ◽  
Author(s):  
David V. Tuxen ◽  
Susan Lane
2017 ◽  
Vol 63 (4) ◽  
pp. 375-379 ◽  
Author(s):  
James W Leatherman ◽  
Ramiro Saavedra Romero ◽  
Robert S Shapiro

1991 ◽  
Vol 143 (5_pt_1) ◽  
pp. 1115-1120 ◽  
Author(s):  
Kyoji Tsuno ◽  
Kazunori Miura ◽  
Motohiro Takeya ◽  
Theodor Kolobow ◽  
Tohru Morioka

Author(s):  
Fa-Li Ju ◽  
Qinrong Sun ◽  
Changlei Hou ◽  
Xue Huang ◽  
Xiaoping Yu ◽  
...  

In this study, adaptive branch fan performance in a distributed fan ventilation system was tested. The results demonstrate that the adaptive branch fan stabilises the branch air flow rate within a certain air pressure range corresponding to the branch duct inlet, and this range becomes increasingly narrow as the fan control signal is adjusted to reduce the speed of the fan. The adaptive branch fan is less affected by the main fan and other branch fans in the distributed fan ventilation system because it has a good self-adaptive ability of ventilation duct resistance characteristics and anti-interference ability of the air flow rate. Furthermore, the hydraulic characteristics of the branch fans in the distributed fan ventilation system were analysed. The new performance characterisation parameters and method for modifying the engineering design for the adaptive branch fan were presented. Practical application: This study investigates the adaptive performance of the branch fan in a distributed fan ventilation system. Our results demonstrate that the new branch fan can stabilise the air flow rate in a mechanical ventilation system. More importantly, we not only propose performance characterisation parameters of the adaptive branch fan that are important for understanding the operation of a mechanical ventilation system, but also present a method of engineering design application. This study can guide the design and operation of mechanical ventilation systems.


2021 ◽  
Vol 7 ◽  
Author(s):  
Kevin Kahn ◽  
Richard M. Mariita

There is growing evidence that viruses responsible for pandemics, such as Middle East respiratory syndrome and severe acute respiratory syndrome, are mainly spread through aerosols. Recommendations have been introduced to reduce the transmission risks of virulent airborne viral particles by increasing ventilation rates, expressed in air changes per hour (ACHs), effectively improving the dilution of pathogens via mechanical ventilation. However, infrastructural and operational costs associated with upgrades of building heating, ventilation, and air conditioning systems make these solutions expensive. It is well documented that Ultraviolet Subtype C (UVC) disinfection can help lower exposure risks by inactivating viruses and the performance of such solutions can translate into equivalent ventilation. Here, we present the first framework to extract the optimal UVC requirements to improve facility management yet ensuring compliance with ventilation guidelines at lower energy costs. The Kahn–Mariita (KM) model considers the air quality of shared enclosed spaces over time by supplementing the existing mechanical ventilation with localized UVC air treatment and includes variables such as room size, occupancy, existing ventilation, and target equivalent ACH. For example, the model applied to a conference room shows that a UVC chamber with recirculation rates of 160 m3/h increases ventilation from an ACH 3 to 7.9 and reduces the room’s reset time from 46 to <10 min with as little as 1 W. Recirculation rates of 30 m3/h however offer no benefits beyond 200 mW, with an eACH of 3.9 and reset time of 31 min. The first finding is that single-pass disinfection is not an appropriate metric of performance, i.e., low recirculation rates increase single-pass disinfection, and, however, only treats a portion of the space volume within a given time, limiting the overall performance. Conversely, higher recirculation rates decrease single-pass disinfection but treat larger portions of air, potentially multiple times, and are therefore expected to lower the transmission risk faster. The second result is that for fixed amounts of recirculating air flow, increasing UVC power helps with diminishing return, while for a fixed UVC power, increasing the recirculating air flow will always help. This dynamic is particularly important toward optimizing solutions, given the constraints system engineers must work with, and particularly to design for end-user benefits such as increased occupancy, in-dwelling time, or reduction of shared-space reset time.


2021 ◽  
Vol 2 (3) ◽  
pp. 73-78
Author(s):  
Robert Chatburn

The Four Truths 1. The truth of confusion 2. The truth of the origin of confusion 3. The truth of the cessation of confusion 4. The truth of the path leading to the cessation of confusion The 10-Fold Path 1. A breath is one cycle of positive flow (inspiration) and negative flow (expiration) defined in terms of the flow-time curve. 2. A breath is assisted if the ventilator does work on the patient. 3. A ventilator assists breathing using either pressure control or volume control based on the equation of motion for the respiratory system. 4. Breaths are classified by the criteria that trigger (start) and cycle (stop) inspiration 5. Trigger and cycle events can be initiated by the patient or the machine. 6. Breaths are classified as spontaneous or mandatory based on both the trigger and cycle events. 7. There are 3 breath sequences: Continuous mandatory ventilation (CMV), Intermittent Mandatory Ventilation (IMV), and Continuous Spontaneous Ventilation (CSV). 8. There are 5 basic ventilatory patterns: VC-CMV, VC-IMV, PC-CMV, PC-IMV, and PC-CSV: 9. Within each ventilatory pattern there are several variations that can be distinguished by their targeting scheme(s). 10. A mode of ventilation is classified according to its control variable, breath sequence, and targeting scheme(s). Keywords: Breath. Trigger, Cycle, Breath sequences, Ventilatory patterns, Mode of ventilation


1997 ◽  
Vol 25 (3) ◽  
pp. 413-417 ◽  
Author(s):  
Mark J. Rumbak ◽  
Arthur E. Graves ◽  
Mark P. Scott ◽  
Gary K. Sporn ◽  
Frank W. Walsh ◽  
...  

2019 ◽  
Vol 41 (4) ◽  
pp. 507-516
Author(s):  
Fa-Li Ju ◽  
Liying Liu ◽  
Xiaoping Yu

Based on air flow rate testing of each branch fan in a distributed fan ventilation system under different branch air duct inlet static pressures, the conclusion can be drawn that there is a branch fan air flow rate deviation phenomenon. The air flow rate of the branch fan increases with the branch air duct inlet static pressure at the same branch fan speed, and the branch fan hinders the air flow rate in some cases. In this study, a theoretical expression of the deviation of the branch air duct design air flow rate was established, and the influencing factors of the deviation were determined to include the branch air duct resistance characteristics, branch fan performance, and branch air duct inlet pressure ratio. A graphic analytical method for determining the deviation of the branch fan design air flow rate was also proposed. Both methods can provide a theoretical basis for calculating and analysing the deviation of the branch fan design air flow rate in a distributed fan ventilation system. Practical application: This paper provides new data on the performance of a distributed fan ventilation system. Our results could be used to evaluate the impact of distributed zone fans on the air flow rate in a mechanical ventilation system. Crucially, we not only propose two types of methods that can be applied to predict deviations of the air flow rate in a distributed fan ventilation system caused by the branch air duct inlet static pressures but also obtain the factors that are important for understanding the true impact of the deviation of the branch fan air flow rate. This study lays an important foundation for the design and operation of building mechanical ventilation systems.


Sign in / Sign up

Export Citation Format

Share Document