Carbonation of municipal solid waste incineration electrostatic precipitator fly ashes in solution

2014 ◽  
Vol 32 (5) ◽  
pp. 406-413 ◽  
Author(s):  
Aurore De Boom ◽  
Jean-Emmanuel Aubert ◽  
Marc Degrez

Carbonation was applied to a Pb- and Zn-contaminated fraction of municipal solid waste incineration electrofilter fly ashes in order to reduce heavy metal leaching. Carbonation tests were performed in solution, by Na2CO3 addition or CO2 bubbling, and were compared with washing (with water only). The injection of CO2 during the washing did not modify the mineralogy, but the addition of Na2CO3 induced the reaction with anhydrite, forming calcite. Microprobe analyses showed that Pb and Zn contamination was rather diffuse and that the various treatments had no effect on Pb and Zn speciation in the residues. The leaching tests indicated that carbonation using Na2CO3 was successful because it gave a residue that could be considered as non-hazardous material. With CO2 bubbling, Pb and Zn leaching was strongly decreased compared with material washed with water alone, but the amount of chromium extracted became higher than the non-hazardous waste limits for landfilling.

2016 ◽  
Vol 832 ◽  
pp. 31-38
Author(s):  
Andrea Miškufová ◽  
Alexandra Medvecová ◽  
Anna Kochmanová ◽  
Dušan Olčák ◽  
Viktor Hronský

One of the negative aspects of MSW (municipal solid waste) incineration is production of hazardous fly ashes. MSW fly ash usually contains heavy metals like for example chromium, lead, cadmium and organic substances (dioxins, furans), soluble compounds (salts) and other harmful substances. According to environmental legislative and with respect to the environment fly ash as a hazardous waste should be stabilized before landfilling. This work deals with certain problems occurring at solidification process of MSW fly ash by cementation. This work also describes efficiency of stabilization by two different binders (slag cement and waste containing alumina and silica). Leachability tests by TCLP (toxicity characteristic leaching procedure) and compressive strength of original and solidified samples by use of uniaxial pressing were studied in order to find suitable parameters for effective stabilization.


Sign in / Sign up

Export Citation Format

Share Document