Characterization of deformation processing maps of 304L stainless steel based on compressive and tensile flow curves

2018 ◽  
Vol 233 (10) ◽  
pp. 3570-3582 ◽  
Author(s):  
Ji Yeong Park ◽  
Il Yeong Oh ◽  
Chester J Van Tyne ◽  
Young Hoon Moon
Keyword(s):  
Stainless Steel ◽  
High Temperature ◽  
Strain Rate ◽  
Processing Map ◽  
Temperature Deformation ◽  
304L Stainless Steel ◽  
Processing Maps ◽  
Compression Tests ◽  
Flow Curves ◽  
Deformation Processing

The efficiency factor (η) and the instability factor ([Formula: see text] in deformation processing maps are regarded as the reliable indices of formability during high-temperature deformation. Deformation processing maps are primarily based on strain rate sensitivity ( m) and are usually created by high-temperature compression tests. To analyze the effect of the mode of flow on the deformation processing map, deformation processing maps based on both compressive and tensile flow curves for 304L stainless steel were determined and compared in the current study. As the instantaneous strain rate varies during both the tensile and compression tests when a constant crosshead speed is used, strain rate compensated deformation processing maps have been determined and compared. In addition, the frictional effect of barreling during compression testing on the deformation processing map has been analyzed. Both deformation processing maps based on either compressive or tensile flow curves are estimated to be complementary.

Characterization of High Temperature Deformation Behavior of BFe10-1-2 Cupronickel Alloy Using Orthogonal Analysis

2017 ◽  
Vol 36 (7) ◽  
pp. 701-710
Author(s):  
Jun Cai ◽  
Kuaishe Wang ◽  
Xiaolu Zhang ◽  
Wen Wang
Keyword(s):  
High Temperature ◽  
Flow Stress ◽  
Constitutive Equation ◽  
Strain Rate ◽  
Deformation Behavior ◽  
High Temperature Deformation ◽  
Temperature Deformation ◽  
Compression Tests ◽  
Statistical Parameters ◽  
Orthogonal Analysis

AbstractHigh temperature deformation behavior of BFe10-1-2 cupronickel alloy was investigated by means of isothermal compression tests in the temperature range of 1,023~1,273 K and strain rate range of 0.001~10 s–1. Based on orthogonal experiment and variance analysis, the significance of the effects of strain, strain rate and deformation temperature on the flow stress was evaluated. Thereafter, a constitutive equation was developed on the basis of the orthogonal analysis conclusions. Subsequently, standard statistical parameters were introduced to verify the validity of developed constitutive equation. The results indicated that the predicted flow stress values from the constitutive equation could track the experimental data of BFe10-1-2 cupronickel alloy under most deformation conditions.

High Temperature Deformation Mechanisms and Processing Map for Hot Working of Cast-Homogenized Mg-3Sn-2Ca Alloy

2010 ◽  
Vol 638-642 ◽  
pp. 3616-3621 ◽  
Author(s):  
K.P. Rao ◽  
Y.V.R.K. Prasad ◽  
Norbert Hort ◽  
Karl Ulrich Kainer
Keyword(s):  
Strain Rate ◽  
Processing Map ◽  
Volume Fraction ◽  
Flow Instability ◽  
Back Stress ◽  
Hot Working ◽  
High Temperature Deformation ◽  
Temperature Deformation ◽  
Strain Rates ◽  
Compression Tests

The hot working behavior of Mg-3Sn-2Ca alloy has been investigated in the temperature range 300–500 oC and strain rate range 0.0003–10 s-1, with a view to evaluate the mechanisms and optimum parameters of hot working. For this purpose, a processing map has been developed on the basis of the flow stress data obtained from compression tests. The stress-strain curves exhibited steady state behavior at strain rates lower than 0.01 s-1 and at temperatures higher than 350 oC and flow softening occurred at higher strain rates. The processing map exhibited two dynamic recrystallization domains in the temperature and strain rate ranges: (1) 300–420 oC and 0.0003–0.003 s-1, and (2) 420–500 oC and 0.003–1.0 s-1, the latter one being useful for commercial hot working. Kinetic analysis yielded apparent activation energy values of 161 and 175 kJ/mole in domains (1) and (2) respectively. These values are higher than that for self-diffusion in magnesium suggesting that the large volume fraction of intermetallic particles CaMgSn present in the matrix generates considerable back stress. The processing map reveals a wide regime of flow instability which gets reduced with increase in temperature or decrease in strain rate.

Constitutive Analysis and Microstructure Evolution of the High-Temperature Deformation Behavior of an Advanced Intermetallic Multi-Phase γ-TiAl-Based Alloy

2014 ◽  
Vol 922 ◽  
pp. 807-812 ◽  
Author(s):  
Robert Werner ◽  
Emanuel Schwaighofer ◽  
Martin Schloffer ◽  
Helmut Clemens ◽  
Janny Lindemann ◽  
...  
Keyword(s):  
High Temperature ◽  
Strain Rate ◽  
Deformation Behavior ◽  
Thermomechanical Processing ◽  
True Strain ◽  
Strain Curve ◽  
High Temperature Deformation ◽  
Temperature Deformation ◽  
Nominal Composition ◽  
Compression Tests

In the present study the high-temperature deformation behavior of a caste and subsequently HIPed β-solidifying γ-TiAl-based alloy with a nominal composition of Ti-43.5Al-4Nb-1Mo-0.1B (in at. %), termed TNM alloy, is investigated. At room temperature this alloy consists of ordered γ-TiAl, α2-Ti3Al and βo-TiAl phases. By increasing the temperature, α2and βodisorder to α and β, respectively. In order to get a better understanding of dynamic recovery and recrystallization processes during thermomechanical processing, isothermal compression tests on TNM specimens are carried out on a Gleeble®3500 simulator. These tests are conducted at temperatures ranging from 1100 °C to 1250 °C (in the α/α2+β/βo+γ phase field region) applying strain rates in the range of 0.005 s-1to 0.5 s-1up to a true strain of 0.9. The evolution of microstructure along with the dynamically recrystallized grain size during hot deformation is examined by scanning electron microscopy (SEM). The flow softening behavior after reaching the peak stress in the true stress-true strain curve is attributed to dynamic recrystallization. By using the Zener-Hollomon parameter as a temperature-compensated strain rate the dependence of flow stress on temperature and strain rate is shown to follow a hyperbolic-sine Arrhenius-type relationship.

Study of Hot Formability of High Nitrogen Martensitic Stainless Steel

2008 ◽  
Vol 604-605 ◽  
pp. 279-284 ◽  
Author(s):  
Mohamad El Mehtedi
Keyword(s):  
Stainless Steel ◽  
Strain Rate ◽  
Working Conditions ◽  
Processing Map ◽  
Martensitic Stainless Steel ◽  
High Nitrogen ◽  
Flow Curves ◽  
Hot Torsion ◽  
Working Response ◽  
Safe Working

Alloying high-chromium steels with Nitrogen leads to increase in strength, fatigue life and corrosion resistance, but reduce ductility and could induce cracks formation during forging. In order to address these problems, the hot working response of a high Nitrogen martensitic stainless steel (Fe-16.2%Cr-1.1%Mo-0.33%N-0.34%C) has been investigated by means of hot torsion tests up to rupture, in the temperature and strain rate ranges of 900-1200°C and 0.005-5 s-1 respectively. The peak stresses of the flow curves were related to strain rate (e&) and temperature (T) by the well known sinh equation. The ductility and the safe working conditions were presented in terms of processing map. The microstructure of the steel in the quenched state after deformation was analyzed by means of optical microscopy; the differences in term of morphology and distribution of the various constituents were discussed.

High-temperature deformation processing maps for a NiTiCu shape memory alloy

2011 ◽  
Vol 26 (19) ◽  
pp. 2484-2492 ◽  
Author(s):  
Vyasa V. Shastry ◽  
Bikas Maji ◽  
Madangopal Krishnan ◽  
Upadrasta Ramamurty
Keyword(s):  
High Temperature ◽  
Shape Memory Alloy ◽  
Shape Memory ◽  
High Temperature Deformation ◽  
Temperature Deformation ◽  
Processing Maps ◽  
Deformation Processing ◽  
Image Position

Abstract

High Temperature Deformation Behaviour and Processing Maps of AZ81 Magnesium Alloy

2011 ◽  
Vol 686 ◽  
pp. 168-175 ◽  
Author(s):  
Hui Min Liao ◽  
Ming Zeng ◽  
Si Yuan Long ◽  
Han Xue Cao
Keyword(s):  
High Temperature ◽  
Flow Stress ◽  
Magnesium Alloy ◽  
Strain Rate ◽  
Hot Deformation ◽  
Flow Instability ◽  
Temperature Deformation ◽  
Stable Phase ◽  
Processing Temperature ◽  
Processing Maps

The hot compression deformation behavior of AZ81 magnesium alloy was studied with Gleeble-1500 thermal simulation machine at the strain rate of 0.003 ~ 3.0s-1 and temperature of 340 ~ 430 °C. The results show that, the flow stress decreases when the deformation temperature increases and strain rate decreases; the peak stress increases with decrease of the temperature and the increase of the strain rate; the critical strain that comes into stable phase increases obviously. It is that the high temperature flow stress model of AZ81 magnesium alloy is constructed by introduceing Zener-Hollomon parameters, its average deformation activation energy is 169.48 kJ / mol. Processing maps of AZ81 magnesium alloy is also calculated and analyzed by the dynamic model of the material. Useing hot deformation processing maps, the flow instability zone is determined and the best process parameters access to the test parameters during hot deformation are as follow: thermal processing temperature range of 380 °C ~ 420 °C, strain rate range of 0.01 ~ 0.03 S-1.

High-Temperature Deformation Behavior of the γ Alloy Ti-48Ai-2Cr-2Nb

1990 ◽  
Vol 213 ◽  
Author(s):  
Donald S. Shih ◽  
Gary K. Scarr
Keyword(s):  
High Temperature ◽  
Strain Rate ◽  
True Strain ◽  
High Temperature Deformation ◽  
Temperature Deformation ◽  
Strain Rates ◽  
Compression Tests ◽  
Uniform Deformation ◽  
Good Workability ◽  
Low Strain Rate

ABSTRACTThe hot-workability of a two-phase (γ+α2) alloy, Ti-48A1-2Cr-2Nb, has been studied by conducting isothermal compression tests to 0.8 true strain over the temperature range of 975–1200°C at strain rates between 1×l0−1 and 3×10−3s−1. A deformation map showing temperature, strain rate, soundness of deformation, and isostress contours was constructed. Good workability is found from the low temperature/low strain rate regime to combinations of high temperature and either high or low strain rate. The upper-limit flow stress for good workability is between 450 and 500 MPa. Deformation induced softening occurs at all conditions. SEM and TEM examinations of the deformed specimens reveal that non-uniform deformation takes place at all strain rates, but cracking occurs mostly at high strain rates (e.g. 1×10−1s−1), especially combined with low temperatures. The cracking appears to progress primarily along γ/α2interfaces. It is thought that non-uniform deformation develops channels of shear bands, which in turn promote localized recrystallization, thus accommodating higher strains.

Sign in / Sign up

Export Citation Format

Share Document