A multi-scale model of real contact area for linear guideway based on the fractal theory

2021 ◽  
pp. 095440622098336
Author(s):  
Xinxin Li ◽  
Zhimin Li ◽  
Sun Jin ◽  
Jichang Zhang
Keyword(s):  
Contact Area ◽  
Manufacturing Industry ◽  
Fractal Theory ◽  
Scale Model ◽  
Design Stage ◽  
Real Contact Area ◽  
The Real ◽  
Multi Scale ◽  
Real Contact ◽  
Proposed Model

High precision, efficiency and reliability are the unremitting pursuits of machinery manufacturing industry. As one of the pivotal function parts of high-end NC machine tool, precise linear guideway determines the machining precision and operation performance. Accurate evaluation and prediction of surface topography are the crucial effects on the matching performance of linear guideway. In this paper, the real contact area is regarded as a key parameter, a multi-scale method with the fractal theory is proposed. First, the contact area of a single asperity was obtained with Hertz contact theory. Afterwards, the contact area between rough surfaces was deduced by the fractal theory. Finally, using the proposed multi-scale contact mechanics model, the real contact area between rough plane and cylinder was obtained by integral solution. Compared with the former fractal model and GW model, the proposed model on the real contact area calculation of linear guideway is more accurate and comprehensive. The effect factors of load, fractal parameter and friction were discussed, the increasing rate of real contact area of smoother surface is greater as load increases. The proposed model may provide practical guidance for assembly accuracy and surface quality requirements at design stage.

A Fractal Theory of the Interfacial Temperature Distribution in the Slow Sliding Regime: Part I—Elastic Contact and Heat Transfer Analysis

1994 ◽  
Vol 116 (4) ◽  
pp. 812-822 ◽  
Author(s):  
S. Wang ◽  
K. Komvopoulos
Keyword(s):  
Contact Area ◽  
Temperature Rise ◽  
Fractal Theory ◽  
Heat Transfer Analysis ◽  
Maximum Temperature ◽  
Real Contact Area ◽  
The Real ◽  
Real Contact ◽  
Maximum Temperature Rise ◽  
Fractal Domain

The frictional temperature rises at the microcontacts of rough surfaces are analyzed by characterizing the surfaces as fractals and assuming Hertzian contacts of spherical asperity tips. The maximum temperature rise of a fractal surface domain in the slow sliding regime, where transient effects are negligible, is expressed as a function of thermomechanical properties, sliding speed, friction coefficient, real and apparent contact areas of the fractal domain, and fractal parameters. The distribution density function of the temperature rise at the real contact area is also determined based on the statistical temperature rise distributions of individual microcontacts and the maximum temperature rise of a fractal domain. This function characterizes the fractions of the real contact area subjected to different temperature rises, and can be used to analyze tribological interactions on dry and boundary-lubricated sliding surfaces.

scholarly journals Relationship between the real contact behavior and tribological characteristics of cotton fabric

Friction ◽  
2020 ◽  
Author(s):  
Rongxin Chen ◽  
Jiaxin Ye ◽  
Wei Zhang ◽  
Jiang Wei ◽  
Yan Zhang ◽  
...  
Keyword(s):  
Friction Coefficient ◽  
Contact Area ◽  
Dynamic Change ◽  
Tribological Characteristics ◽  
Real Contact Area ◽  
Cotton Fibers ◽  
Friction Behavior ◽  
Contact Behavior ◽  
The Real ◽  
Real Contact

Abstract The tribological characteristics of cotton fibers play an important role in engineering and materials science, and real contact behavior is a significant aspect in the friction behavior of cotton fibers. In this study, the tribological characteristics of cotton fibers and their relationship with the real contact behavior are investigated through reciprocating linear tribotesting and real contact analysis. Results show that the friction coefficient decreases with a general increase in load or velocity, and the load and velocity exhibit a co-influence on the friction coefficient. The dynamic change in the real contact area is recorded clearly during the experiments and corresponds to the fluctuations observed in the friction coefficient. Moreover, the friction coefficient is positively correlated with the real contact area based on a quantitative analysis of the evolution of friction behavior and the real contact area at different loads and velocities. This correlation is evident at low velocities and medium load.

An Observation Method of Real Contact Area during PVA Brush Scrubbing

2018 ◽  
Vol 282 ◽  
pp. 73-76 ◽  
Author(s):  
Toshiyuki Sanada ◽  
Masanao Hanai ◽  
Akira Fukunaga ◽  
Hirokuni Hiyama
Keyword(s):  
Contact Area ◽  
Contact Condition ◽  
Real Contact Area ◽  
Led Light ◽  
The Real ◽  
Real Contact ◽  
Observation Method

In the post CMP cleaning, the contact condition between PVA brush and surface is very important. In this study, we observed the real contact area between a brush and surface using a collimating LED light and prism. As a result, we found that the real contact area increases with increasing the brush compression. In addition, we also found that the real contact area decreases when the brush starts to move, and the brush was locally compressed due to its deformation.

scholarly journals A 3D study of the contact surface developed by the contact between the tires and the structural pavements

Exacta ◽  
2009 ◽  
Vol 6 (2) ◽  
pp. 197-208
Author(s):  
Alex Alves Bandeira ◽  
Rita Moura Fortes ◽  
João Virgílio Merighi
Keyword(s):  
Finite Element ◽  
Contact Mechanics ◽  
Contact Area ◽  
Augmented Lagrangian Method ◽  
Numerical Results ◽  
Real Contact Area ◽  
The Real ◽  
Real Contact ◽  
Commercial Program ◽  
Contact Surfaces

The basic aim in this work is to present a new technique to analyze the contact surfaces developed by the contact between the tires and the structural pavements by numerical simulations, using 3D finite element formulations with contact mechanics. For this purpose, the Augmented Lagrangian method is used. This study is performed just putting the tires on the structural pavement. These tires and the structural pavement are discretized by finite elements under large 3D elastoplastic deformation. The real loads (of aircrafts, trucks or cars) are applied directly on each tire and by contact mechanics procedures, the real contact area between the tires and the pavement surface is computed. The penetration conditions and the contact interfaces are investigated in details. Furthermore, the pressure developed at the contact surfaces is automatically calculated and transferred to the structural pavement by contact mechanics techniques. The purpose of this work research is to show that the contact area is not circular and the finite element techniques can calculate automatically the real contact area, the real geometry and its stresses and strains. In the end of this work, numerical results in terms of geometry, stress and strain are presented and compared to show the ability of the algorithm. These numerical results are also compared with the numerical results obtained by the commercial program ANSYS.

scholarly journals Measurement of Real Contact Area for Rough Metal Surfaces and the Distinction of Contribution From Elasticity and Plasticity

2020 ◽  
Vol 143 (7) ◽  
Author(s):  
Lei-Tao Li ◽  
Xuan-Ming Liang ◽  
Yu-Zhe Xing ◽  
Duo Yan ◽  
Gang-Feng Wang
Keyword(s):  
Contact Area ◽  
Rough Surfaces ◽  
Normal Load ◽  
Real Contact Area ◽  
The Real ◽  
Physical Mechanisms ◽  
Frustrated Total Internal Reflection ◽  
Real Contact ◽  
New Apparatus ◽  
Elastic And Plastic Deformation

Abstract The measurement of the real contact area between rough surfaces is one of the most challenging problems in contact mechanics and is of importance to understand some physical mechanisms in tribology. Based on the frustrated total internal reflection, a new apparatus is designed to measure the real contact area. For metallic samples with various surface topographies, the relation between normal load and the real contact area is measured. The unloading process is first considered to distinguish the contribution of elasticity and plasticity in contact with rough surfaces. It is found that both elasticity and plasticity are involved throughout the continuous loading process, different from some present understanding and assumptions that they play at different loading stages. A quantitative parameter is proposed to indicate the contribution of plasticity. The present work not only provides an experimental method to measure the real contact area but figures out how elastic and plastic deformation works in contact with rough surfaces.

Sign in / Sign up

Export Citation Format

Share Document