scholarly journals Dual-optimization trajectory planning based on parametric curves for a robot manipulator

2020 ◽  
Vol 17 (3) ◽  
pp. 172988142092004
Author(s):  
Yong-Lin Kuo ◽  
Chun-Chen Lin ◽  
Zheng-Ting Lin
Keyword(s):  
Path Planning ◽  
Trajectory Planning ◽  
Robot Manipulator ◽  
Optimal Path ◽  
Inequality Constraints ◽  
Parametric Curves ◽  
Optimal Velocity ◽  
Time Optimal ◽  
Planning Algorithm ◽  
Motion Profile

This article presents a dual-optimization trajectory planning algorithm, which consists of the optimal path planning and the optimal motion profile planning for robot manipulators, where the path planning is based on parametric curves. In path planning, a virtual-knot interpolation is proposed for the paths required to pass through all control points, so the common curves, such as Bézier curves and B-splines, can be incorporated into it. Besides, an optimal B-spline is proposed to generate a smoother and shorter path, and this scheme is especially suitable for closed paths. In motion profile planning, a generalized formulation of time-optimal velocity profiles is proposed, which can be implemented to any types of motion profiles with equality and inequality constraints. Also, a multisegment cubic velocity profile is proposed by solving a multiobjective optimization problem. Furthermore, a case study of a dispensing robot is investigated through the proposed dual-optimization algorithm applied to numerical simulations and experimental work.

Online time-optimal path and trajectory planning for robotic multipoint assembly

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Yi Liu ◽  
Meng Joo Er ◽  
Chen Guo
Keyword(s):  
Dynamic Programming ◽  
Path Planning ◽  
Trajectory Planning ◽  
Optimal Path ◽  
Adaptive Dynamic Programming ◽  
Problem Model ◽  
Content Type ◽  
Markov Decision ◽  
Time Optimal ◽  
Planning Algorithm

Purpose The purpose of this paper is to propose an efficient path and trajectory planning method to solve online robotic multipoint assembly. Design/methodology/approach A path planning algorithm called policy memorized adaptive dynamic programming (PM-ADP) combines with a trajectory planning algorithm called adaptive elite genetic algorithm (AEGA) for online time-optimal path and trajectory planning. Findings Experimental results and comparative study show that the PM-ADP is more efficient and accurate than traditional algorithms in a smaller assembly task. Under the shortest assembly path, AEGA is used to plan the time-optimal trajectories of the robot and be more efficient than GA. Practical implications The proposed method builds a new online and efficient path planning arithmetic to cope with the uncertain and dynamic nature of the multipoint assembly path in the Cartesian space. Moreover, the optimized trajectories of the joints can make the movement of the robot continuously and efficiently. Originality/value The proposed method is a combination of time-optimal path planning with trajectory planning. The traveling salesman problem model of assembly path is established to transfer the assembly process into a Markov decision process (MDP). A new dynamic programming (DP) algorithm, termed PM-ADP, which combines the memorized policy and adaptivity, is developed to optimize the shortest assembly path. GA is improved, termed AEGA, which is used for online time-optimal trajectory planning in joints space.

Near Time Optimal Path Control of Kinematically Redundant Manipulators with Bounded Joint Velocities and Torques

2011 ◽  
Vol 110-116 ◽  
pp. 1547-1555
Author(s):  
Mohammad Hassan Ghasemi ◽  
Navvab Kashiri ◽  
Morteza Dardel ◽  
Mohammad Hadi Pashaei
Keyword(s):  
Linear Programming ◽  
Trajectory Planning ◽  
Optimal Path ◽  
Phase Plane Analysis ◽  
Programming Technique ◽  
Plane Analysis ◽  
Path Control ◽  
Time Optimal ◽  
Planning Algorithm ◽  
Optimal Control Scheme

here, a time optimal control scheme for trajectory planning of kinematically manipulators subjects to actuator torque limits is proposed by using the phase plane analysis and linear programming technique. In addition, the limit on joint velocities is considered. In order to affect the constraint of joint velocities, this constraint is converted to constraint on joint acceleration and it is affected linear programming problem as an additional constraint. Also, an explicit algorithm for finding the switching points is presented. To this end, some simulations are given to demonstrate the efficiency of proposed trajectory planning algorithm.

Time Optimal Path Planning of Palletizing Robot

2013 ◽  
Vol 470 ◽  
pp. 658-662
Author(s):  
Yong Pan Xu ◽  
Ying Hong
Keyword(s):  
Trajectory Planning ◽  
Optimal Trajectory ◽  
Optimal Path ◽  
Straight Path ◽  
Optimal Path Planning ◽  
Quintic Polynomial ◽  
Time Optimal ◽  
Acceleration And Deceleration ◽  
Planning Algorithm ◽  
Optimal Trajectory Planning

In order to improve the efficiency and reduce the vibration of Palletizing Robot, a new optimal trajectory planning algorithm is proposed. This algorithm is applied to the trajectory planning of Palletizing manipulators. The S-shape acceleration and deceleration curve is adopted to interpolate joint position sequences. Considering constraints of joint velocities, accelerations and jerks, the traveling time of the manipulator is minimized. The joint interpolation confined by deviation is used to approximate the straight path, and the deviation is decreased significantly by adding only small number of knots. Traveling time is solved by using quintic polynomial programming strategy between the knots, and then time-jerk optimal trajectories which satisfy constraints are planned. The results show that the method can avoid the problem of manipulator singular points and improve the palletize efficiency.

An Innovative Motion Planning for 4-DOF PKM

2014 ◽  
Vol 619 ◽  
pp. 200-208
Author(s):  
Wen Hu Nan ◽  
Xiao Qi Tang ◽  
Bao Song
Keyword(s):  
Path Planning ◽  
Motion Planning ◽  
Optimal Path ◽  
Physical Constraints ◽  
Optimal Path Planning ◽  
Time Optimal ◽  
Planning Algorithm ◽  
Sphere Radius ◽  
Parallel Kinematic ◽  
Optimal Trajectory Planning

This paper presents an innovative motion planning algorithm for pick and place operations in the industry. The new technique is to seek optimal dynamics pattern for PKM(parallel kinematic manipulator), this is achieved by two parts: First, to achieve optimal path planning, a center sphere method based on virtual obstacle path planning method is proposed to solve such path planning with Particle Swarm Optimization (PSO); Second, to enhance the efficiency of the robot, time optimal trajectory planning is finished with respect to robotic physical constraints. Then, the method applied to a 4-DOF PKM is tested by numerical simulations, some examples are presented making comparisons on same tasks assigned by different sphere radius, the simulation results show the efficiency and the effectiveness of the proposed approach to determine the optimal motion pattern for 4-DOF PKM in obstacle-free workspace.

scholarly journals A 2D Optimal Path Planning Algorithm for Autonomous Underwater Vehicle Driving in Unknown Underwater Canyons

2021 ◽  
Vol 9 (3) ◽  
pp. 252
Author(s):  
Yushan Sun ◽  
Xiaokun Luo ◽  
Xiangrui Ran ◽  
Guocheng Zhang
Keyword(s):  
Path Planning ◽  
Obstacle Avoidance ◽  
Autonomous Underwater Vehicles ◽  
Optimal Path ◽  
Small Scale ◽  
Target Point ◽  
Safe Driving ◽  
Policy Gradient ◽  
Planning Algorithm ◽  
Path Planning Algorithm

This research aims to solve the safe navigation problem of autonomous underwater vehicles (AUVs) in deep ocean, which is a complex and changeable environment with various mountains. When an AUV reaches the deep sea navigation, it encounters many underwater canyons, and the hard valley walls threaten its safety seriously. To solve the problem on the safe driving of AUV in underwater canyons and address the potential of AUV autonomous obstacle avoidance in uncertain environments, an improved AUV path planning algorithm based on the deep deterministic policy gradient (DDPG) algorithm is proposed in this work. This method refers to an end-to-end path planning algorithm that optimizes the strategy directly. It takes sensor information as input and driving speed and yaw angle as outputs. The path planning algorithm can reach the predetermined target point while avoiding large-scale static obstacles, such as valley walls in the simulated underwater canyon environment, as well as sudden small-scale dynamic obstacles, such as marine life and other vehicles. In addition, this research aims at the multi-objective structure of the obstacle avoidance of path planning, modularized reward function design, and combined artificial potential field method to set continuous rewards. This research also proposes a new algorithm called deep SumTree-deterministic policy gradient algorithm (SumTree-DDPG), which improves the random storage and extraction strategy of DDPG algorithm experience samples. According to the importance of the experience samples, the samples are classified and stored in combination with the SumTree structure, high-quality samples are extracted continuously, and SumTree-DDPG algorithm finally improves the speed of the convergence model. Finally, this research uses Python language to write an underwater canyon simulation environment and builds a deep reinforcement learning simulation platform on a high-performance computer to conduct simulation learning training for AUV. Data simulation verified that the proposed path planning method can guide the under-actuated underwater robot to navigate to the target without colliding with any obstacles. In comparison with the DDPG algorithm, the stability, training’s total reward, and robustness of the improved Sumtree-DDPG algorithm planner in this study are better.

scholarly journals Time-optimal Path Planning of Multi-axis CNC Processes Using Variability of Orientation

Procedia CIRP ◽  
2021 ◽  
Vol 96 ◽  
pp. 324-329
Author(s):  
Frederik Wulle ◽  
Max Richter ◽  
Christoph Hinze ◽  
Alexander Verl
Keyword(s):  
Path Planning ◽  
Optimal Path ◽  
Optimal Path Planning ◽  
Time Optimal

scholarly journals Real - Time Trajectory and Velocity Planning for Autonomous Vehicles

2021 ◽  
Vol 10 (5) ◽  
pp. 439-448
Author(s):  
Hrishikesh Dey ◽  
Rithika Ranadive ◽  
Abhishek Chaudhari
Keyword(s):  
Path Planning ◽  
Velocity Profile ◽  
Real Time ◽  
Autonomous Vehicle ◽  
Optimal Path ◽  
Autonomous Driving ◽  
Navigation Algorithm ◽  
Velocity Planning ◽  
Planning Algorithm ◽  
Path Planner

Path planning algorithm integrated with a velocity profile generation-based navigation system is one of the most important aspects of an autonomous driving system. In this paper, a real-time path planning solution to obtain a feasible and collision-free trajectory is proposed for navigating an autonomous car on a virtual highway. This is achieved by designing the navigation algorithm to incorporate a path planner for finding the optimal path, and a velocity planning algorithm for ensuring a safe and comfortable motion along the obtained path. The navigation algorithm was validated on the Unity 3D Highway-Simulated Environment for practical driving while maintaining velocity and acceleration constraints. The autonomous vehicle drives at the maximum specified velocity until interrupted by vehicular traffic, whereas then, the path planner, based on the various constraints provided by the simulator using µWebSockets, decides to either decelerate the vehicle or shift to a more secure lane. Subsequently, a splinebased trajectory generation for this path results in continuous and smooth trajectories. The velocity planner employs an analytical method based on trapezoidal velocity profile to generate velocities for the vehicle traveling along the precomputed path. To provide smooth control, an s-like trapezoidal profile is considered that uses a cubic spline for generating velocities for the ramp-up and ramp-down portions of the curve. The acceleration and velocity constraints, which are derived from road limitations and physical systems, are explicitly considered. Depending upon these constraints and higher module requirements (e.g., maintaining velocity, and stopping), an appropriate segment of the velocity profile is deployed. The motion profiles for all the use-cases are generated and verified graphically.

Sign in / Sign up

Export Citation Format

Share Document