Problem statement. Most modern materials have a polycrystalline structure. Their most important property − mechanical strength − is determined by the defective structure of the crystals. Under the defective structure should be understood not only the concentration and distribution of point defects, dislocations, packaging defects, but also the grain boundaries. The development of such processes as diffusion, recrystallization, plasticity, creep, fragility, cracking and corrosion resistance depends on the grain boundaries. The degree of this influence is directly related to the peculiarities of the atomic structure of boundaries and their interaction with other defects. Therefore, the study of the influence of interfacial and intraphase boundaries on the development of plastic deformation in modern materials is an urgent task. Purpose of the article. Investigation of the influence of the type of polycrystalline boundaries on the kinetics of propagation of plastic deformation in low-carbon low-alloy steel 06Х1. Conclusion. Investigation of the influence of the type of polycrystalline boundaries on the kinetics of propagation of plastic deformation in low-carbon low-alloy steel 06Х1. Conclusion. For low-carbon low-alloy steel 06Х1 the influence of the type of polycrystalline boundaries on the kinetics of plastic deformation propagation is investigated. The relationship between the propagation of plastic deformation and the type of interfacial and intraphase boundaries is established. The proposed physical model takes into account the ability of structural components to block plastic deformation.
Keywords: propagation of plastic deformation; boundaries of a special type; boundaries of a general type
The influence of grain boundaries on the development of deformation in low-carbon low-alloy steels
