scholarly journals 7th Cambridge Diagenesis Conference 2011: an introduction

Clay Minerals ◽  
2014 ◽  
Vol 49 (2) ◽  
pp. 125-126
Author(s):  
C. V. Jeans ◽  
N. J. Tosca

The Cambridge Diagenesis Conferences (1981–1998) were set up to act as a conduit for the interchange of clay mineral expertise between universities and research institutes on one hand, and the hydrocarbon industry on the other. At the time, oil companies were dealing with the development of the North Sea Oil Province which was turning out to be a natural laboratory for the fundamental study of authigenic clay minerals and their relationship to lithofacies, burial, overpressure, reservoir quality and hydrocarbon emplacement. This symbiosis between industry and academia flourished for nearly two decades. Each conference was followed by a special issue of Clay Minerals dealing with topics relevant to, or discussed at the particular meeting. By the late 1990s the North Sea had become a mature province and the major oil companies were looking to other parts of the world to replenish their reserves.

Author(s):  
R. S. Wimpenny

1. Diameter measurements of Rhizosolenia styliformis from the Antarctic, the subtropical Atlantic and Pacific Oceans and from the North Sea and neighbouring waters have made it appear necessary to set up two varieties, oceanica and semispina, in addition to the type of the species R. styliformis. The type as I describe it has been called var. longispina by Hustedt, but elsewhere it has often been figured as the var. oceanica of this paper. Var. semispina is synonymous with the form represented by Karsten as R. semispina Hensen. It differs from R. semispina as drawn by Hensen and its synonym R. hebetata forma semispina Gran, but is thought likely to be linked by intermediates. If this is so R. hebetata may have to be extended to include and suppress R. styliformis, as var. semispina is linked to the type by intermediates. Var. oceanica has no intermediate forms and, if R. hebetata is to be extended, this variety should be established as a separate species.2. Var. oceanica is absent from the southern North Sea and appears to be an indicator species related to oceanic inflow.3. Auxospore formation was observed for the type in the southern North Sea in 1935 and biometric observations suggest that a period of 3-4 years elapsed between the production of auxospore generations in that area. Outside the southern North Sea for the type, measurements give no indication of auxospore generations occurring at intervals exceeding a year. While auxospore formation has been seen in var. oceanica from the Shetlands area samples of June 1935 and July 1938, this phenomenon has not been observed for var. semispina.


Clay Minerals ◽  
2000 ◽  
Vol 35 (1) ◽  
pp. 25-55 ◽  
Author(s):  
C. V. Jeans ◽  
D. S. Wray ◽  
R. J. Merriman ◽  
M. J. Fisher

AbstractThe nature and origin of authigenic clay minerals and silicate cements in the Jurassic and Cretaceous sediments of England and the North Sea are discussed in relation to penecontemporaneous volcanism in and around the North Sea Basin. Evidence, including new REE data, suggests that the authigenic clay minerals represent the argillization of volcanic ash under varying diagenetic conditions, and that volcanic ash is a likely source for at least the early silicate cements in many sandstones. The nature and origin of smectite-rich, glauconite-rich, berthierine-rich and kaolin-rich volcanogenic clay mineral deposits are discussed. Two patterns of volcanogenic clay minerals facies are described. Pattern A is related to ash argillization in the non-marine and marine environments. Pattern B is developed by the argillization of ash concentrated in the sand and silt facies belts in the seas bordering ash-covered islands and massifs. It is associated with regression/ transgression cycles which may be related to thermal doming and associated volcanism, including the submarine release of hydrothermal fluids rich in Fe. The apparent paucity of volcanogenic clay deposits in the Jurasssic and Early Cretaceous sediments of the North Sea is discussed.


2005 ◽  
Vol 7 ◽  
pp. 21-24
Author(s):  
Poul Schiøler ◽  
Jan Andsbjerg ◽  
Ole R. Clausen ◽  
Gregers Dam ◽  
Karen Dybkjær ◽  
...  

Intense drilling activity following the discovery of the Siri Field in 1995 has resulted in an improved understanding of the siliciclastic Palaeogene succession in the Danish North Sea sector (Fig. 1). Many of the new wells were drilled in the search for oil reservoirs in sand bodies of Paleocene–Eocene age. The existing lithostratigraphy was based on data from a generation of wells that were drilled with deeper stratigraphic targets, with little or no interest in the overlying Palaeogene sediments, and thus did not adequately consider the significance of the Palaeogene sandstone units in the Danish sector. In order to improve the understanding of the distribution, morphology and age of the Palaeogene sediments, in particular the economically important sandstone bodies, a detailed study of this succession in the Danish North Sea has recently been undertaken. An important aim of the project was to update the lithostratigraphic framework on the basis of the new data.The project was carried out at the Geological Survey of Denmark and Greenland (GEUS) with participants from the University of Aarhus, DONG E&P and Statoil Norway, and was supported by the Danish Energy Agency. Most scientific results cannot be released until September 2006, but a revised lithostratigraphic scheme may be published prior to that date. Formal definition of new units and revision of the lithostratigraphy are in preparation. All of the widespread Palaeogene mudstone units in the North Sea have previously been formally established in Norwegian or British wells, and no reference sections exist in the Danish sector. As the lithology of a stratigraphic unit may vary slightly from one area to another, Danish reference wells have been identified during the present project, and the lithological descriptions of the formations have been expanded to include the appearance of the units in the Danish sector. Many of the sandstone bodies recently discovered in the Danish sector have a limited spatial distribution and were sourced from other areas than their contemporaneous counterparts in the Norwegian and British sectors. These sandstone bodies are therefore defined as new lithostratigraphic units in the Danish sector, and are assigned Danish type and reference sections. There is a high degree of lithological similarity between the Palaeogene–Neogene mudstone succession from Danish offshore boreholes and that from onshore exposures and boreholes, and some of the mudstone units indeed seem identical. However, in order to acknowledge the traditional distinction between offshore and onshore stratigraphic nomenclature, the two sets of nomenclature are kept separate herein. In recent years oil companies operating in the North Sea have developed various in-house lithostratigraphic charts for the Paleocene–Eocene sand and mudstone successions in the Danish and Norwegian sectors. A number of informal lithostratigraphic units have been adopted and widely used. In the present project, these units have been formally defined and described, maintaining their original names whenever feasible, with the aim of providing an unequivocal nomenclature for the Palaeogene – lower Neogene succession in the Danish sector. It has not been the intention to establish a sequence stratigraphic model for this succession in the North Sea; the reader is referred to the comprehensive works of Michelsen (1993), Neal et al. (1994), Mudge & Bujak (1994, 1996a, b), Michelsen et al. (1995, 1998), Danielsen et al. (1997) and Rasmussen (2004).


Geophysics ◽  
1996 ◽  
Vol 61 (5) ◽  
pp. 1511-1523 ◽  
Author(s):  
Dan Kosloff ◽  
John Sherwood ◽  
Zvi Koren ◽  
Elana Machet ◽  
Yael Falkovitz

A method for velocity and interface depth determination based on tomography of migrated common reflecting point (CRP) gathers is presented. The method is derived from the tomographic principle that relates traveltime change along a given ray to perturbations in slowness and layer depths. The tomographic principle is used to convert depth errors in migrated CRP gathers to time errors along a CRP ray pair and thus enable use of conventional traveltime tomography. It is also used to affect a very fast prestack migration and set up the tomography matrix. The velocity‐depth determination method uses the available offsets of all CRPs and inverts for the parameters of all layers simultaneously. Hand picking of depth errors on CRP gathers is avoided by a method where the tomography matrix operates directly on the migrated gathers. The velocity‐depth determination method is demonstrated on a synthetic example and on a field example from the North Sea.


Sign in / Sign up

Export Citation Format

Share Document