scholarly journals The seas approach reduced Cobb angle, and the thera-band exercise improved scapula winging in a double major curve type of Adolescent Idiopathic Scoliosis (AIS) – a case report

Scoliosis ◽  
2014 ◽  
Vol 9 (S1) ◽  
Author(s):  
Chiiko Ishihara ◽  
Yosuke Shiraishi
2020 ◽  
pp. 219256822094145
Author(s):  
Prudence Wing Hang Cheung ◽  
Abhishek Mannem ◽  
Jason Pui Yin Cheung

Study Design: Retrospective cohort study. Objectives: To explore the possibility of predicting final body height at maturity based on associating parameters at the time of diagnosing adolescent idiopathic scoliosis (AIS), while examining the effect of curve magnitude and deterioration. Methods: A total of 284 female patients with AIS (mean age 12.2 ± 1.1 years, 52.5% premenarchal) were followed till skeletal maturity, indicated by ≥Risser stage 4, static body height and arm span over the past 6 months, and postmenarche 2 years. Standing body height, arm span, menarchal status, Risser staging, distal radius and ulna (DRU) classification, Sanders staging (SS), Cobb angles (major and minor curves), and Lenke curve types at initial presentation were examined. Patients with/without curve deterioration were compared. Multiple linear regression was used for predicting final body height (cm), and remaining height increase (%). Results: Baseline body height was 152.1 ± 7.1 cm and major curve Cobb angle was 27.1° ± 7.4°, whereas at maturity they were 159.5 ± 5.4 cm and 32.5° ± 9.3°, respectively. For patients presented at Risser stage 0 or 1, radius grade (R) 6, ulnar grade (U) 5, or SS3, those with curve deterioration exhibited greater height increase potential at initial presentation ( P < .05) than those without deterioration. No intergroup difference was found for patients presented at ≥Risser 2, R7, U6, SS4. Predictive baseline parameters were age, body height, Cobb angle (major curve), curve type, and DRU grades. Prediction models of final body height ( R 2 = 0.735, P < .001) and remaining height increase ( R 2 = 0.742, P < .001) were established. Conclusions: Final body height prediction model was derived for female patients with AIS, with baseline body height and ulnar grading having larger impacts than other parameters.


2019 ◽  
Vol 31 (6) ◽  
pp. 857-864 ◽  
Author(s):  
Hiroki Oba ◽  
Jun Takahashi ◽  
Sho Kobayashi ◽  
Tetsuro Ohba ◽  
Shota Ikegami ◽  
...  

OBJECTIVEUnfused main thoracic (MT) curvatures occasionally increase after selective thoracolumbar/lumbar (TL/L) fusion. This study sought to identify the predictors of an unacceptable increase in MT curve (UIMT) after selective posterior fusion (SPF) of the TL/L curve in patients with Lenke type 5C adolescent idiopathic scoliosis (AIS).METHODSForty-eight consecutive patients (44 females and 4 males, mean age 15.7 ± 2.5 years, range 13–24 years) with Lenke type 5C AIS who underwent SPF of the TL/L curve were analyzed. The novel “Shinshu line” (S-line) was defined as a line connecting the centers of the concave-side pedicles of the upper instrumented vertebra (UIV) and lowest instrumented vertebra (LIV) on preoperative radiographs. The authors established an S-line tilt to the right as S-line positive (S-line+, i.e., the UIV being to the right of the LIV) and compared S-line+ and S-line− groups for thoracic apical vertebral translation (T-AVT) and MT Cobb angle preoperatively, early postoperatively, and at final follow-up. The predictors for T-AVT > 20 mm at final follow-up were evaluated as well. T-AVT > 20 mm was defined as a UIMT.RESULTSAmong the 48 consecutively treated patients, 26 were S-line+ and 22 were S-line−. At preoperative, early postoperative, and final follow-up a minimum of 2 years later, the mean T-AVT was 12.8 mm (range −9.3 to 32.8 mm), 19.6 mm (range −13.0 to 41.0 mm), and 22.8 mm (range −1.9 to 68.7 mm) in the S-line+ group, and 10.8 mm (range −5.1 to 27.3 mm), 16.2 mm (range −11.7 to 42.1 mm), and 11.0 mm (range −6.3 to 26.9 mm) in the S-line− group, respectively. T-AVT in S-line+ patients was significantly larger than that in S-line− patients at the final follow-up. Multivariate analysis revealed S-line+ (odds ratio [OR] 23.8, p = 0.003) and preoperative MT Cobb angle (OR 7.9, p = 0.001) to be predictors of a UIMT.CONCLUSIONSS-line+ was defined as the UIV being to the right of the LIV. T-AVT in the S-line+ group was significantly larger than in the S-line− group at the final follow-up. S-line+ status and larger preoperative MT Cobb angle were independent predictors of a UIMT after SPF for the TL/L curve in patients with Lenke type 5C AIS. Surgeons should consider changing the UIV and/or LIV in patients exhibiting S-line+ during preoperative planning to avoid a possible increase in MT curve and revision surgery.


2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Laura Scaramuzzo ◽  
Antonino Zagra ◽  
Giuseppe Barone ◽  
Stefano Muzzi ◽  
Leone Minoia ◽  
...  

AbstractAim of the study was to evaluate sagittal parameters modifications, with particular interest in thoracic kyphosis, in patients affected by adolescent idiopathic scoliosis (AIS) comparing hybrid and all-screws technique. From June 2010 to September 2018, 145 patients were enrolled. Evaluation included: Lenke classification, Risser scale, coronal Cobb angle, thoracic kyphosis (TK), lumbar lordosis (LL), sagittal vertical axis (SVA), pelvic incidence (PI), pelvic tilt (PT), sacral slope (SS). Patients were divided in two groups (1 all-screws and 2 hybrid); a further division, in both groups, was done considering preoperative TK values. Descriptive and inferential statistical analysis was conducted. 99 patients were in group 1, 46 in group 2 (mean follow-up 3.7 years). Patients with a normo-kyphotic profile developed a little variation in TK (Δ pre–post = 2.4° versus − 2.0° respectively). Hyper-kyphotic subgroups had a tendency of restoring a good sagittal alignment. Hypo-kyphotic subgroups, patients treated with all-screw implants developed a higher increase in TK mean Cobb angle (Δ pre–post = 10°) than the hybrid subgroup (Δ pre–post = 5.4°) (p = 0.01). All-screws group showed better results in restoring sagittal alignment in all subgroups compared to hybrid groups, especially in hypo-TK subgroup, with the important advantage to give better correction on coronal plane.


Author(s):  
Kadir Gem ◽  
Sertan Hancioglu ◽  
Abdulkadir Bilgiç ◽  
Serkan Erkan

Abstract Introduction The purpose of this study was to evaluate the relationship between the correction rate in Cobb angle and the improvement in quality of life profile in terms of Scoliosis Research Society (SRS)-22 values. Patients and Methods Between January 2007 and December 2013, posterior instrumentation and fusion was performed to 30 patients with adolescent idiopathic scoliosis (AIS). Patients were grouped according to their improvement rate in Cobb angles after surgery. Patients with an improvement rate of > 80% were grouped as Group A; those with an improvement rate of > 60% and ≤ 80% as Group B and those with an improvement rate of ≤ 60% were grouped as Group C. The SRS-22 questionnaire of these three groups was calculated and their relationship with the improvement in Cobb angle was evaluated. Results No statistical difference was found among the three groups in terms of pain, appearance, function, spirit, satisfaction, and SRS-22 values (all p > 0.05). Conclusion The results of this study demonstrate that the degree of correction rate does not correlate with the degree of improvement in the SRS-22 questionnaire in patients with AIS that underwent posterior fusion and instrumentation.


2019 ◽  
Vol 28 (1) ◽  
pp. 22-26
Author(s):  
Hassan Ghandhari ◽  
Ebrahim Ameri ◽  
Mir Bahram Safari ◽  
Habib Kheirabadi ◽  
Hadi S. Asl ◽  
...  

Author(s):  
X Wang ◽  
CE Aubin ◽  
RM Schwend

The objective was to assess deformity correction and bone-screw force associated respectively with concave manipulation first, convex manipulation first, and different differential rod contouring configurations. Instrumentation scenarios were computationally simulated for 10 AIS cases with mean thoracic Cobb angle (MT) of 54±8°, apical vertebral rotation (AVR) of 19±2° and thoracic kyphosis of 21±9°. Instrumentations with major correction maneuvers using the concave side rod were first simulated; instrumentations with major correction maneuvers using the convex side rod were then simulated. Simulated correction maneuvers were concave/convex rod translation followed by apical vertebral derotation and then convex/concave rod translation. There were no significant differences in deformity corrections and bone-screw forces between concave rod translation first and convex rod translation first with differential rod contouring. Increasing differential rod contouring angle and concave rod diameter improved AVR correction and increased the TK and bone-screw forces; the effect on the MT Cobb angle was not clinically significant.


Sign in / Sign up

Export Citation Format

Share Document