Rock physics model‐based seismic inversion

2006 ◽  
Author(s):  
Kyle Spikes ◽  
Jack Dvorkin ◽  
Gary Mavko
Keyword(s):  
Rock Physics ◽  
Seismic Inversion ◽  
Model Based ◽  
Physics Model ◽  
Rock Physics Model

Construction of rock physics model based on electrical conductivity characteristics of rock samples obtained in seafloor hydrothermal areas

2018 ◽  
Vol 71 (0) ◽  
pp. 43-55 ◽  
Author(s):  
Yusuke Ohta ◽  
Tada-nori Goto ◽  
Katsuaki Koike ◽  
Koki Kashiwaya ◽  
Weiren Lin ◽  
...  
Keyword(s):  
Electrical Conductivity ◽  
Rock Physics ◽  
Rock Samples ◽  
Model Based ◽  
Physics Model ◽  
Rock Physics Model

Two-parameter prestack seismic inversion of porosity and pore structure parameter of fractured carbonate reservoirs: Part 1 — Methods

2018 ◽  
Vol 6 (4) ◽  
pp. SM1-SM8 ◽  
Author(s):  
Tingting Zhang ◽  
Yuefeng Sun
Keyword(s):  
Pore Structure ◽  
Seismic Data ◽  
Rock Physics ◽  
Seismic Inversion ◽  
High Porosity ◽  
Structure Parameter ◽  
Pore Structure Parameter ◽  
Fractured Zones ◽  
Physics Model ◽  
Rock Physics Model

Fractured zones in deeply buried carbonate hills are important because they often have better permeability resulting in prolific production than similar low-porosity rocks. Nevertheless, their detection poses great challenge to conventional seismic inversion methods because they are mostly low in acoustic impedance and bulk modulus, hardly distinguishable from high-porosity zones or mudstones. A proxy parameter of pore structure defined in a rock-physics model, the so-called Sun model, has been used for delineating fractured zones in which the pore structure parameter is relatively high, whereas the porosity is low in general. Simultaneous seismic inversion of the pore structure parameter and porosity proves to be difficult and nontrivial in practice. Although the pore structure parameter is well-defined at locations where density, P-, and S-velocity are known from logs, estimation of P- and S-velocity information, especially density information from prestack seismic data is rather challenging. A three-step iterative inversion method, which uses acoustic, gradient, and elastic impedance from angle-stacked seismic data as input to the rock-physics model for calculating porosity and bulk and shear pore structure parameters simultaneously, is proposed and implemented to solve this problem. The methodology is successfully tested with well logs and seismic data from a deeply buried carbonate hill in the Bohai Bay Basin, China.

A predictive anisotropic rock-physics model for estimating elastic rock properties of unconventional shale reservoirs

2019 ◽  
Vol 38 (5) ◽  
pp. 358-365 ◽  
Author(s):  
Colin M. Sayers ◽  
Sagnik Dasgupta
Keyword(s):  
Accurate Determination ◽  
Rock Physics ◽  
Seismic Inversion ◽  
P Wave ◽  
Rock Properties ◽  
Anisotropic Rock ◽  
Rock Classification ◽  
Shale Reservoirs ◽  
Physics Model ◽  
Rock Physics Model

This paper presents a predictive rock-physics model for unconventional shale reservoirs based on an extended Maxwell scheme. This model accounts for intrinsic anisotropy of rock matrix and heterogeneities and shape-induced anisotropy arising because the dimensions of kerogen inclusions and pores are larger parallel to the bedding plane than perpendicular to this plane. The model relates the results of seismic amplitude variation with offset inversion, such as P- and S-impedance, to the composition of the rock and enables identification of rock classes such as calcareous, argillaceous, siliceous, and mixed shales. This allows the choice of locations with the best potential for economic production of hydrocarbons. While this can be done using well data, prestack inversion of seismic P-wave data allows identification of the best locations before the wells are drilled. The results clearly show the ambiguity in rock classification obtained using poststack inversion of P-wave seismic data and demonstrate the need for prestack seismic inversion. The model provides estimates of formation anisotropy, as required for accurate determination of P- and S-impedance, and shows that anisotropy is a function not only of clay content but also other components of the rock as well as the aspect ratio of kerogen and pores. Estimates of minimum horizontal stress based on the model demonstrate the need to identify rock class and estimate anisotropy to determine the location of any stress barriers that may inhibit hydraulic fracture growth.

scholarly journals Seismic characterization of geothermal sedimentary reservoirs: A field example from the Copenhagen area, Denmark

2020 ◽  
Vol 8 (2) ◽  
pp. T275-T291 ◽  
Author(s):  
Kenneth Bredesen ◽  
Esben Dalgaard ◽  
Anders Mathiesen ◽  
Rasmus Rasmussen ◽  
Niels Balling
Keyword(s):  
Reservoir Characterization ◽  
Energy Resource ◽  
Rock Physics ◽  
Seismic Inversion ◽  
Amplitude Variation With Offset ◽  
Seismic Characterization ◽  
Rock Physics Modeling ◽  
Physics Modeling ◽  
Physics Model ◽  
Rock Physics Model

We have seismically characterized a Triassic-Jurassic deep geothermal sandstone reservoir north of Copenhagen, onshore Denmark. A suite of regional geophysical measurements, including prestack seismic data and well logs, was integrated with geologic information to obtain facies and reservoir property predictions in a Bayesian framework. The applied workflow combined a facies-dependent calibrated rock-physics model with a simultaneous amplitude-variation-with-offset seismic inversion. The results suggest that certain sandstone distributions are potential aquifers within the target interval, which appear reasonable based on the geologic properties. However, prediction accuracy suffers from a restricted data foundation and should, therefore, only be considered as an indicator of potential aquifers. Despite these issues, the results demonstrate new possibilities for future seismic reservoir characterization and rock-physics modeling for exploration purposes, derisking, and the exploitation of geothermal energy as a green and sustainable energy resource.

Rock-physics machine learning toolkit for joint litho-fluid facies classification and compaction modeling

2021 ◽  
Vol 40 (10) ◽  
pp. 742-750
Author(s):  
Roman Beloborodov ◽  
James Gunning ◽  
Marina Pervukhina ◽  
Kester Waters ◽  
Nick Huntbatch
Keyword(s):  
Machine Learning ◽  
Em Algorithm ◽  
Prior Information ◽  
Rock Physics ◽  
Seismic Inversion ◽  
Borehole Data ◽  
Facies Classification ◽  
Physics Model ◽  
Rock Physics Model ◽  
Fitting Parameters

Correct lithofacies interpretation sourced from wireline log data is an essential source of prior information for joint seismic inversion for facies and impedances, among other applications. However, this information is difficult to interpret or extract manually due to the multivariate and high dimensionality of wireline logs. Facies inference is also challenging for traditional clustering-based approaches because pervasive compaction trends affect a number of petrophysical measurements simultaneously. Another common pitfall in automated clustering approaches is the inability to account for underlying diagenetic processes that correlate with depth. Here, we address these challenges by introducing a rock-physics machine learning toolkit for joint litho-fluid facies classification. The litho-fluid types are inferred from the borehole data within the objective framework of a maximum-likelihood approach for latent facies variables and rock-physics model parameters, explicitly accounting for compaction and depth effects. The inference boils down to an expectation-maximization (EM) algorithm with strong spatial coupling. Each litho-fluid type is associated with an instance of a particular rock-physics model with a unique set of fitting parameters, constrained to a physically reasonable range. These fitting parameters in turn are inferred using bound-constrained optimization as part of the EM algorithm. Outputs produced by the toolkit can be used directly to specify the necessary prior information for seismic inversion, including per-facies rock-physics models and facies proportions. We present an example application of the tool to real borehole data from the North West Shelf of Australia to illustrate the method and discuss its characteristic features in depth.

Sign in / Sign up

Export Citation Format

Share Document