Reverse time migration of multiples: Reducing migration artifacts using the wavefield decomposition imaging condition

Geophysics ◽  
2017 ◽  
Vol 82 (4) ◽  
pp. S307-S314 ◽  
Author(s):  
Yibo Wang ◽  
Yikang Zheng ◽  
Qingfeng Xue ◽  
Xu Chang ◽  
Tong W. Fei ◽  
...  
Keyword(s):  
Complex Function ◽  
Synthetic Data ◽  
Velocity Model ◽  
High Amplitude ◽  
Frequency Noise ◽  
Reverse Time ◽  
Reverse Time Migration ◽  
Data Set ◽  
Time Migration ◽  
Wavefield Decomposition

In the implementation of migration of multiples, reverse time migration (RTM) is superior to other migration algorithms because it can handle steeply dipping structures and offer high-resolution images of the complex subsurface. However, the RTM results using two-way wave equation contain high-amplitude, low-frequency noise and false images generated by improper wave paths in migration velocity model with sharp velocity interfaces or strong velocity gradients. To improve the imaging quality in RTM of multiples, we separate the upgoing and downgoing waves in the propagation of source and receiver wavefields. A complex function involved with the Hilbert transform is used in wavefield decomposition. Our approach is cost effective and avoids the large storage of wavefield snapshots required by the conventional wavefield separation technique. We applied migration of multiples with wavefield decomposition on a simple two-layer model and the Sigsbee 2B synthetic data set. Our results demonstrate that the proposed approach can improve the image generated by migration of multiples significantly.

Reverse time migration of multiples: Eliminating migration artifacts in angle domain common image gathers

Geophysics ◽  
2014 ◽  
Vol 79 (6) ◽  
pp. S263-S270 ◽  
Author(s):  
Yibo Wang ◽  
Yikang Zheng ◽  
Lele Zhang ◽  
Xu Chang ◽  
Zhenxing Yao
Keyword(s):  
Free Surface ◽  
Radon Transform ◽  
Synthetic Data ◽  
Velocity Model ◽  
Migration Velocity ◽  
Reverse Time ◽  
Reverse Time Migration ◽  
Data Set ◽  
Time Migration ◽  
Nonzero Curvature

Free-surface-related multiples are usually regarded as noise in conventional seismic processing. However, they can provide extra illumination of the subsurface and thus have been used in migration procedures, e.g., in one- and two-way wave-equation migrations. The disadvantage of the migration of multiples is the migration artifacts generated by the crosscorrelation of different seismic events, e.g., primaries and second-order free-surface-related multiples, so the effective elimination of migration artifacts is crucial for migration of multiples. The angle domain common image gather (ADCIG) is a suitable domain for testing the correctness of a migration velocity model. When the migration velocity model is correct, all the events in ADCIGs should be flat, and this provides a criterion for removing the migration artifacts. Our approach first obtains ADCIGs during reverse time migration and then applies a high-resolution parabolic Radon transform to all ADCIGs. By doing so, most migration artifacts will reside in the nonzero curvature regions in the Radon domain, and then a muting procedure can be implemented to remove the data components outside the vicinity of zero curvature. After the application of an adjoint Radon transform, the filtered ADCIGs are obtained and the final denoised migration result is generated by stacking all filtered ADCIGs. A three-flat-layer velocity model and the Marmousi synthetic data set are used for numerical experiments. The numerical results revealed that the proposed approach can eliminate most artifacts generated by migration of multiples when the migration velocity model is correct.

Dirty salt velocity inversion: The road to a clearer subsalt image

Geophysics ◽  
2011 ◽  
Vol 76 (5) ◽  
pp. WB169-WB174 ◽  
Author(s):  
Shuo Ji ◽  
Tony Huang ◽  
Kang Fu ◽  
Zhengxue Li
Keyword(s):  
Model Building ◽  
Synthetic Data ◽  
Velocity Model ◽  
Reverse Time ◽  
Reverse Time Migration ◽  
Data Set ◽  
Velocity Inversion ◽  
Time Migration ◽  
And Migration ◽  
Subsalt Imaging

For deep-water Gulf of Mexico, accurate salt geometry is critical to subsalt imaging. This requires the definition of both external and internal salt geometries. In recent years, external salt geometry (i.e., boundaries between allochthonous salt and background sediment) has improved a great deal due to advances in acquisition, velocity model building, and migration algorithms. But when it comes to defining internal salt geometry (i.e., intrasalt inclusions or dirty salt), no efficient method has yet been developed. In common industry practices, intrasalt inclusions (and thus their velocity anomalies) are generally ignored during the model building stages. However, as external salt geometries reach higher levels of accuracy, it becomes more important to consider the once-ignored effects of dirty salt. We have developed a reflectivity-based approach for dirty salt velocity inversion. This method takes true-amplitude reverse time migration stack volumes as input, then estimates the dirty salt velocity based on reflectivity under a 1D assumption. Results from a 2D synthetic data set and a real 3D Wide Azimuth data set demonstrated that the reflectivity inversion scheme significantly improves the subsalt image for certain areas. In general, we believe that this method produces a better salt model than the traditional clean salt velocity approach.

Simultaneous reverse time migration of primaries and free-surface related multiples without multiple prediction

Geophysics ◽  
2014 ◽  
Vol 79 (1) ◽  
pp. S1-S9 ◽  
Author(s):  
Yibo Wang ◽  
Xu Chang ◽  
Hao Hu
Keyword(s):  
Free Surface ◽  
Field Data ◽  
Synthetic Data ◽  
Velocity Model ◽  
Reverse Time ◽  
Reverse Time Migration ◽  
Data Set ◽  
Imaging Condition ◽  
Time Migration ◽  
Multiple Prediction

Prestack reverse time migration (RTM) is usually regarded as an accurate imaging tool and has been widely used in exploration. Conventional RTM only uses primaries and treats free-surface related multiples as noise; however, free-surface related multiples can sometimes provide extra illumination of the subsurface, and this information could be used in migration procedures. There are many migration methods using free-surface related multiples, but most approaches need to predict multiples, which is time consuming and prone to error. We discovered a new RTM approach that uses the primaries and the free-surface related multiples simultaneously. Compared with migration methods that only use free-surface related multiples, the proposed approach can provide comparable migration results and does not need multiple predictions. In our approach, the source function in conventional RTM was replaced with recorded field data including primaries and free-surface related multiples, together with a synthetic wavelet; the back-propagated primaries in the conventional RTM were replaced with complete recorded field data. The imaging condition of the proposed approach was the same as the crosscorrelation imaging condition of conventional RTM. A three-layer velocity model with scatterers and the Sigsbee 2B synthetic data set were used for numerical experiments. The numerical results showed that the proposed approach can cover a wider range of the subsurface and provide better illumination compared with conventional RTM. The proposed approach was easy to implement and avoided tedious multiple prediction; it might be significant for general complex subsurface imaging.

An implicit stabilization strategy for Q-compensated reverse time migration

Geophysics ◽  
2020 ◽  
Vol 85 (3) ◽  
pp. S169-S183
Author(s):  
Hanming Chen ◽  
Hui Zhou ◽  
Ying Rao
Keyword(s):  
Robust Stabilization ◽  
Synthetic Data ◽  
Frequency Noise ◽  
Reverse Time ◽  
Reverse Time Migration ◽  
Data Set ◽  
Time Migration ◽  
Wavefield Extrapolation ◽  
Amplitude Compensation ◽  
Seismic Images

Reverse time migration with [Formula: see text] compensation ([Formula: see text]-RTM) is an effective approach to enhance the resolution of seismic images because it retrieves the amplitude loss and phase distortion induced by the viscosity of media. According to the crosscorrelation imaging condition, [Formula: see text]-RTM requires compensation for the amplitude loss in the propagation paths of source and receiver wavefields, which can be realized by solving an amplitude-boosted wave equation. However, the amplitude-boosted simulations suffer from numerical instability due to the amplification of high-frequency noise. We have developed a robust stabilization strategy for [Formula: see text]-RTM by incorporating a time-variant filter into the amplitude-boosted wavefield extrapolation step. We modify the Fourier spectrum of the operator that controls the amplitude compensation to be time variant, and we add to the spectrum a stabilization factor. Doing so, we integrate the time-variant filter into the viscoacoustic wave propagator implicitly, and we avoid any explicit filtering operation in [Formula: see text]-RTM. We verify the robustness of this stabilized [Formula: see text]-RTM with two synthetic data examples. We also apply this technique to a field data set to demonstrate the imaging improvements compared to an acoustic RTM and a more traditional [Formula: see text]-RTM method.

Application of RTM 3D angle gathers to wide-azimuth data subsalt imaging

Geophysics ◽  
2011 ◽  
Vol 76 (5) ◽  
pp. WB175-WB182 ◽  
Author(s):  
Yan Huang ◽  
Bing Bai ◽  
Haiyong Quan ◽  
Tony Huang ◽  
Sheng Xu ◽  
...  
Keyword(s):  
Model Updating ◽  
Velocity Model ◽  
Azimuth Angle ◽  
Reverse Time ◽  
Reverse Time Migration ◽  
Data Set ◽  
Additional Information ◽  
Time Migration ◽  
Reflection Angle ◽  
Subsalt Imaging

The availability of wide-azimuth data and the use of reverse time migration (RTM) have dramatically increased the capabilities of imaging complex subsalt geology. With these improvements, the current obstacle for creating accurate subsalt images now lies in the velocity model. One of the challenges is to generate common image gathers that take full advantage of the additional information provided by wide-azimuth data and the additional accuracy provided by RTM for velocity model updating. A solution is to generate 3D angle domain common image gathers from RTM, which are indexed by subsurface reflection angle and subsurface azimuth angle. We apply these 3D angle gathers to subsalt tomography with the result that there were improvements in velocity updating with a wide-azimuth data set in the Gulf of Mexico.

Use of RTM full 3D subsurface angle gathers for subsalt velocity update and image optimization: Case study at Shenzi field

Geophysics ◽  
2011 ◽  
Vol 76 (5) ◽  
pp. WB27-WB39 ◽  
Author(s):  
Zheng-Zheng Zhou ◽  
Michael Howard ◽  
Cheryl Mifflin
Keyword(s):  
Model Building ◽  
Transverse Isotropy ◽  
Velocity Model ◽  
Reverse Time ◽  
Reverse Time Migration ◽  
Data Set ◽  
Edge Diffraction ◽  
Time Migration ◽  
Image Optimization ◽  
Free Generation

Various reverse time migration (RTM) angle gather generation techniques have been developed to address poor subsalt data quality and multiarrival induced problems in gathers from Kirchhoff migration. But these techniques introduce new problems, such as inaccuracies in 2D subsurface angle gathers and edge diffraction artifacts in 3D subsurface angle gathers. The unique rich-azimuth data set acquired over the Shenzi field in the Gulf of Mexico enabled the generally artifact-free generation of 3D subsurface angle gathers. Using this data set, we carried out suprasalt tomography and salt model building steps and then produced 3D angle gathers to update the subsalt velocity. We used tilted transverse isotropy RTM with extended image condition to generate full 3D subsurface offset domain common image gathers, which were subsequently converted to 3D angle gathers. The angle gathers were substacked along the subsurface azimuth axis into azimuth sectors. Residual moveout analysis was carried out, and ray-based tomography was used to update velocities. The updated velocity model resulted in improved imaging of the subsalt section. We also applied residual moveout and selective stacking to 3D angle gathers from the final migration to produce an optimized stack image.

Reducing artifacts of elastic reverse time migration by the deprimary technique

Geophysics ◽  
2018 ◽  
Vol 83 (6) ◽  
pp. S569-S577 ◽  
Author(s):  
Yang Zhao ◽  
Houzhu Zhang ◽  
Jidong Yang ◽  
Tong Fei
Keyword(s):  
Complex Function ◽  
Noise Removal ◽  
Pure Mode ◽  
Reverse Time ◽  
Reverse Time Migration ◽  
S Wave ◽  
Imaging Condition ◽  
Velocity Models ◽  
Time Migration ◽  
Wavefield Decomposition

Using the two-way elastic-wave equation, elastic reverse time migration (ERTM) is superior to acoustic RTM because ERTM can handle mode conversions and S-wave propagations in complex realistic subsurface. However, ERTM results may not only contain classical backscattering noises, but they may also suffer from false images associated with primary P- and S-wave reflections along their nonphysical paths. These false images are produced by specific wave paths in migration velocity models in the presence of sharp interfaces or strong velocity contrasts. We have addressed these issues explicitly by introducing a primary noise removal strategy into ERTM, in which the up- and downgoing waves are efficiently separated from the pure-mode vector P- and S-wavefields during source- and receiver-side wavefield extrapolation. Specifically, we investigate a new method of vector wavefield decomposition, which allows us to produce the same phases and amplitudes for the separated P- and S-wavefields as those of the input elastic wavefields. A complex function involved with the Hilbert transform is used in up- and downgoing wavefield decomposition. Our approach is cost effective and avoids the large storage of wavefield snapshots that is required by the conventional wavefield separation technique. A modified dot-product imaging condition is proposed to produce multicomponent PP-, PS-, SP-, and SS-images. We apply our imaging condition to two synthetic models, and we demonstrate the improvement on the image quality of ERTM.

Acoustic and elastic numerical wave simulations by recursive spatial derivative operators

Geophysics ◽  
2010 ◽  
Vol 75 (6) ◽  
pp. T167-T174 ◽  
Author(s):  
Dan Kosloff ◽  
Reynam C. Pestana ◽  
Hillel Tal-Ezer
Keyword(s):  
Synthetic Data ◽  
Analytic Solutions ◽  
Numerical Dispersion ◽  
Reverse Time ◽  
Reverse Time Migration ◽  
Data Set ◽  
Lamb’S Problem ◽  
Dynamic Elasticity ◽  
Time Migration ◽  
Recursive Operators

A new scheme for the calculation of spatial derivatives has been developed. The technique is based on recursive derivative operators that are generated by an [Formula: see text] fit in the spectral domain. The use of recursive operators enables us to extend acoustic and elastic wave simulations to shorter wavelengths. The method is applied to the numerical solution of the 2D acoustic wave equation and to the solution of the equations of 2D dynamic elasticity in an isotropic medium. An example of reverse-time migration of a synthetic data set shows that the numerical dispersion can be significantly reduced with respect to schemes that are based on finite differences. The method is tested for the solutions of the equations of dynamic elasticity by comparing numerical and analytic solutions to Lamb’s problem.

scholarly journals Reconstructing the primary reflections in seismic data by Marchenko redatuming and convolutional interferometry

Geophysics ◽  
2016 ◽  
Vol 81 (2) ◽  
pp. Q15-Q26 ◽  
Author(s):  
Giovanni Angelo Meles ◽  
Kees Wapenaar ◽  
Andrew Curtis
Keyword(s):  
Velocity Model ◽  
Reverse Time ◽  
Reverse Time Migration ◽  
Data Set ◽  
Seismic Reflection Data ◽  
Surface Reflection ◽  
Reflection Data ◽  
Reference Velocity ◽  
Time Migration ◽  
Recorded Data

State-of-the-art methods to image the earth’s subsurface using active-source seismic reflection data involve reverse time migration. This and other standard seismic processing methods such as velocity analysis provide best results only when all waves in the data set are primaries (waves reflected only once). A variety of methods are therefore deployed as processing to predict and remove multiples (waves reflected several times); however, accurate removal of those predicted multiples from the recorded data using adaptive subtraction techniques proves challenging, even in cases in which they can be predicted with reasonable accuracy. We present a new, alternative strategy to construct a parallel data set consisting only of primaries, which is calculated directly from recorded data. This obviates the need for multiple prediction and removal methods. Primaries are constructed by using convolutional interferometry to combine the first-arriving events of upgoing and direct-wave downgoing Green’s functions to virtual receivers in the subsurface. The required upgoing wavefields to virtual receivers are constructed by Marchenko redatuming. Crucially, this is possible without detailed models of the earth’s subsurface reflectivity structure: Similar to the most migration techniques, the method only requires surface reflection data and estimates of direct (nonreflected) arrivals between the virtual subsurface sources and the acquisition surface. We evaluate the method on a stratified synclinal model. It is shown to be particularly robust against errors in the reference velocity model used and to improve the migrated images substantially.

scholarly journals LAGUERRE-GAUSS FILTERS IN REVERSE TIME MIGRATION IMAGE RECONSTRUCTION

2018 ◽  
Vol 35 (2) ◽  
Author(s):  
Juan Guillermo Paniagua Castrillón ◽  
Olga Lucia Quintero Montoya ◽  
Daniel Sierra-Sosa
Keyword(s):  
Cross Correlation ◽  
Synthetic Data ◽  
Low Frequency ◽  
Frequency Noise ◽  
Reverse Time ◽  
Reverse Time Migration ◽  
Imaging Condition ◽  
Time Migration ◽  
Migration Imaging ◽  
Gauss Transform

ABSTRACT. Reverse time migration (RTM) solves the acoustic or elastic wave equation by means of the extrapolation from source and receiver wavefield in time. A migrated image is obtained by applying a criteria known as imaging condition. The cross-correlation between source and receiver wavefields is the commonly used imaging condition. However, this imaging condition produces spatial low-frequency noise, called artifacts, due to the unwanted correlation of the diving, head and backscattered waves. Several techniques have been proposed to reduce the artifacts occurrence. Derivative operators as Laplacian are the most frequently used. In this work, we propose a technique based on a spiral phase filter ranging from 0 to 2π, and a toroidal amplitude bandpass filter, known as Laguerre-Gauss transform. Through numerical experiments we present the application of this particular filter on three synthetic data sets. In addition, we present a comparative spectral study of images obtained by the zero-lag cross-correlation imaging condition, the Laplacian filtering and the Laguerre-Gauss filtering, showing their frequency features. We also present evidences not only with simulated noisy velocity fields but also by comparison with the model velocity field gradients that this method improves the RTM images by reducing the artifacts and notably enhance the reflective events. Keywords: Laguerre-Gauss transform, zero-lag cross-correlation, seismic migration, imaging condition. RESUMO. A migração reversa no tempo (RTM) resolve a equação de onda acústica ou elástica por meio da extrapolação a partir do campo de onda da fonte e do receptor no tempo. Uma imagem migrada é obtida aplicando um critério conhecido como condição de imagem. A correlação cruzada entre campos de onda de fonte e receptor é a condição de imagem comumente usada. No entanto, esta condição de imagem produz ruído espacial de baixa frequência, chamados artefatos, devido à correlação indesejada das ondas de mergulho, cabeça e retrodifusão. Várias técnicas têm sido propostas para reduzir a ocorrência de artefatos. Operadores derivados como Laplaciano são os mais utilizados. Neste trabalho, propomos uma técnica baseada em um filtro de fase espiral que varia de 0 a 2π, e um filtro passabanda de amplitude toroidal, conhecido como transformada de Laguerre-Gauss. Através de experimentos numéricos, apresentamos a aplicação deste filtro particular em três conjuntos de dados sintéticos. Além disso, apresentamos um estudo comparativo espectral de imagens obtidas pela condição de imagem de correlação cruzada atraso zero, a filtragem de Laplaciano e a filtragem Laguerre-Gauss, mostrando suas características de frequência. Apresentamos evidências não somente com campos simulados de velocidade ruidosa, mas também por comparação com os gradientes de campo de velocidade do modelo que este método melhora as imagens RTM, reduzindo os artefatos e aumentando notavelmente os eventos reflexivos. Palavras-chave: Transformação de Laguerre-Gauss, correlação cruzada atraso zero, migração sísmica, condição de imagem.

Sign in / Sign up

Export Citation Format

Share Document