Robust vector median filtering with a structure-adaptive implementation

Geophysics ◽  
2020 ◽  
Vol 85 (5) ◽  
pp. V407-V414
Author(s):  
Yanghua Wang ◽  
Xiwu Liu ◽  
Fengxia Gao ◽  
Ying Rao
Keyword(s):  
Seismic Data ◽  
Impulse Noise ◽  
Reservoir Characterization ◽  
Median Filter ◽  
Original Data ◽  
Thin Layers ◽  
3D Seismic ◽  
Data Set ◽  
Vector Median ◽  
3D Seismic Data

The 3D seismic data in the prestack domain are contaminated by impulse noise. We have adopted a robust vector median filter (VMF) for attenuating the impulse noise from 3D seismic data cubes. The proposed filter has two attractive features. First, it is robust; the vector median that is the output of the filter not only has a minimum distance to all input data vectors, but it also has a high similarity to the original data vector. Second, it is structure adaptive; the filter is implemented following the local structure of coherent seismic events. The application of the robust and structure-adaptive VMF is demonstrated using an example data set acquired from an area with strong sedimentary rhythmites composed of steep-dipping thin layers. This robust filter significantly improves the signal-to-noise ratio of seismic data while preserving any discontinuity of reflections and maintaining the fidelity of amplitudes, which will facilitate the reservoir characterization that follows.

Geostatistical reservoir characterization constrained by 3D seismic data

1998 ◽  
Vol 4 (2) ◽  
pp. 121-128 ◽  
Author(s):  
O. Dubrule ◽  
M. Thibaut ◽  
P. Lamy ◽  
A. Haas
Keyword(s):  
Seismic Data ◽  
Reservoir Characterization ◽  
3D Seismic ◽  
3D Seismic Data

Application of sparse-layer inversion and harmonic bandwidth extension for a channel system in Southern Alberta, Canada

2020 ◽  
Vol 8 (2) ◽  
pp. T217-T229
Author(s):  
Yang Mu ◽  
John Castagna ◽  
Gabriel Gil
Keyword(s):  
Seismic Data ◽  
Reflection Coefficients ◽  
3D Seismic ◽  
Bandwidth Extension ◽  
Data Set ◽  
Frequency Spectra ◽  
Channel System ◽  
Southern Alberta ◽  
Reflectivity Inversion ◽  
3D Seismic Data

Sparse-layer reflectivity inversion decomposes a seismic trace into a limited number of simple layer responses and their corresponding reflection coefficients for top and base reflections. In contrast to sparse-spike inversion, the applied sparsity constraint is less biased against layer thickness and can thus better resolve thin subtuning layers. Application to a 3D seismic data set in Southern Alberta produces inverted impedances that have better temporal resolution and lateral stability and a less blocky appearance than sparse-spike inversion. Bandwidth extension harmonically extrapolated the frequency spectra of the inverted layers and nearly doubled the usable bandwidth. Although the prospective glauconitic sand tunes at approximately 37 m, bandwidth extension reduced the tuning thickness to 22 m. Bandwidth-extended data indicate a higher correlation with synthetic traces than the original seismic data and reveal features below the original tuning thickness. After bandwidth extension, the channel top and base are more evident on inline and crossline profiles. Lateral facies changes interpreted from the inverted acoustic impedance of the bandwidth-extended data are consistent with observations in wells.

Amplitude and frequency anomalies in regional 3D seismic data surrounding the Mallik 5L-38 research site, Mackenzie Delta, Northwest Territories, Canada

Geophysics ◽  
2006 ◽  
Vol 71 (6) ◽  
pp. B183-B191 ◽  
Author(s):  
M. Riedel ◽  
G. Bellefleur ◽  
S. R. Dallimore ◽  
A. Taylor ◽  
J. F. Wright
Keyword(s):  
Northwest Territories ◽  
Gas Hydrate ◽  
Seismic Data ◽  
Ratio Method ◽  
Unfrozen Water ◽  
3D Seismic ◽  
Mackenzie Delta ◽  
Data Set ◽  
Seismic Amplitude ◽  
3D Seismic Data

Amplitude and frequency anomalies associated with lakes and drainage systems were observed in a 3D seismic data set acquired in the Mallik area, Mackenzie Delta, Northwest Territories, Canada. The site is characterized by large gas hydrate deposits inferred from well-log analyses and coring. Regional interpretation of the gas hydrate occurrences is mainly based on seismic amplitude anomalies, such as brightening or blanking of seismic energy. Thus, the scope of this research is to understand the nature of the amplitude behavior in the seismic data. We have therefore analyzed the 3D seismic data to define areas with amplitude reduction due to contamination from lakes and channels and to distinguish them from areas where amplitude blanking may be a geologic signal. We have used the spectral ratio method to define attenuation (Q) over different areas in the 3D volume and subsequently applied Q-compensation to attenuate lateral variations ofdispersive absorption. Underneath larger lakes, seismic amplitude is reduced and the frequency content is reduced to [Formula: see text], which is half the original bandwidth. Traces with source-receiver pairs located inside of lakes show an attenuation factor Q of [Formula: see text], approximately half of that obtained for source-receiver pairs situated on deep, continuous permafrost outside of lakes. Deeper reflections occasionally identified underneath lakes show low-velocity-related pull-down. The vertical extent of the washout zones is enhanced by acquisition with limited offsets and from processing parameters such as harsh mute functions to reduce noise from surface waves. The strong attenuation and seismic pull-down may indicate the presence of unfrozen water in deeper lakes and unfrozen pore water within the sediments underlying the lakes. Thus, the blanking underneath lakes is not necessarily related to gas migration or other in situ changes in physical properties potentially associated with the presence of gas hydrate.

scholarly journals Evaluation of seismic attributes for reservoir characterization over Edi field, Niger delta, Nigeria using 3d seismic data

2020 ◽  
Vol 8 (2) ◽  
pp. 168
Author(s):  
Nyeneime O. Etuk ◽  
Mfoniso U. Aka ◽  
Okechukwu A. Agbasi ◽  
Johnson C. Ibuot
Keyword(s):  
Seismic Data ◽  
Niger Delta ◽  
Reservoir Characterization ◽  
Seismic Attributes ◽  
3D Seismic ◽  
Root Mean Square Amplitude ◽  
Phase Gradient ◽  
Major Fault ◽  
Seismic Sections ◽  
3D Seismic Data

Seismic attributes were evaluated over Edi field, offshore Western Niger Delta, Nigeria, via 3D seismic data. Manual mappings of the horizons and faults on the in-lines and cross-lines of the seismic sections were done. Various attributes were calculated and out put on four horizons corresponding to the well markers at different formations within the well were identified. The four horizons identified, which includes: H1, H2, H3 and H4 were mapped and interpreted across the field. The operational agenda was thru picking given faults segments on the in–line of seismic volume. A total of five faults coded as F1, F2, F3, F4 and F5, F1 and F5 were the major fault and were observed as extending through the field. Structural and horizon mappings were used to generate time structure maps. The maps showed the various positions and orientations of the faults. Different attributes which include: root mean square amplitude, instantaneous phase, gradient magnitude and chaos were run on the 3D seismic data. The amplitude and incline magnitude maps indicate direct hydrocarbon on the horizon maps; this is very important in the drilling of wells because it shows areas where hydrocarbons are present in the subsurface. The seismic attributes revealed information, which was not readily apparent in the raw seismic data.   

Integrated Reservoir Characterization, Part 2 - Poststack Inversion of 3D Seismic Data

1995 ◽  
Author(s):  
M. H. Al-Fares ◽  
P. G. Kelamis ◽  
J. J. Kim ◽  
N. Akbar ◽  
R. D. Chimblo
Keyword(s):  
Seismic Data ◽  
Reservoir Characterization ◽  
3D Seismic ◽  
3D Seismic Data

Inversion and interpretation of a 3D seismic data set from the Ouachita Mountains, Oklahoma

Geophysics ◽  
2009 ◽  
Vol 74 (2) ◽  
pp. B37-B45 ◽  
Author(s):  
Abuduwali Aibaidula ◽  
George McMechan
Keyword(s):  
Seismic Data ◽  
Acoustic Impedance ◽  
3D Visualization ◽  
Wave Impedance ◽  
P Wave ◽  
3D Seismic ◽  
S Wave ◽  
Ouachita Mountains ◽  
Data Set ◽  
3D Seismic Data

Acoustic impedance inversion (AI) and simultaneous angle-dependent inversion (SADI) of a 3D seismic data set characterize reservoirs of Mississippian Morrowan age in the triangle zone of the frontal Ouachita Mountains, Oklahoma. Acoustic impedance of the near-angle seismic data images the 3D spatial distributions of Wapanucka limestone and Cromwell sandstone. Lamé [Formula: see text] ([Formula: see text] and [Formula: see text]) and [Formula: see text] sections are derived from the P-wave and S-wave impedance ([Formula: see text] and [Formula: see text]) sections produced by the SADI. Lithology is identified from the gamma logs and [Formula: see text]. The [Formula: see text], [Formula: see text], and [Formula: see text] are interpreted in terms of a hydrocarbon distribution pattern. The [Formula: see text] is used to identify high [Formula: see text] regions that are consistent with high sand/shale ratio. The estimated impedances and derived Lamé parameter sections are consistent with the interpretation that parts of the Wapanucka limestone and Cromwell sandstone contain potential gas reservoirs in fault-bounded compartments. The Cromwell sandstone contains the main inferred reservoirs; the two largest of these are each [Formula: see text] in pore volume. The inversion results also explain the observed low production in previous wells because those did not sample the best compartments. We propose a single new well location that would penetrate both reservoirs; 3D visualization facilitates this recommendation.

Sign in / Sign up

Export Citation Format

Share Document