A laboratory study of the effect of clay, silt, and sand content on low-field NMR relaxation time distributions

Geophysics ◽  
2021 ◽  
pp. 1-34
Author(s):  
Yonghui Peng ◽  
Kristina Keating

We have developed a laboratory nuclear magnetic resonance (NMR) study to investigate the effect of clay, silt, and sand content on the NMR relaxation time distribution. Transverse NMR relaxation times ( T2) were determined for water-saturated unconsolidated sediment mixtures of 1%–60% kaolinite clay, 5%–85% silt-size glass beads, and 8%–94% quartz sand by mass. Nearly all of the mixtures were characterized by a unimodal T2 distribution. When clay is present in quantities greater than 10%, the clay content dominates the response. For these samples, the mean-log relaxation times ( T2ML) range from 0.03 to 0.06 s, regardless of silt or sand content. For mixtures with <10% clay, T2ML decreases with increasing clay content. When the clay content is kept the same, T2ML decreases with increasing silt content and increases with the increasing sand content. The strong effect of the clay content on the NMR response is due to the high specific surface area of the clay and the distribution of clay throughout the samples. These results will help improve the interpretation of NMR field data in soils and unconsolidated sediments.

Geophysics ◽  
2011 ◽  
Vol 76 (4) ◽  
pp. G73-G83 ◽  
Author(s):  
Elliot Grunewald ◽  
Rosemary Knight

Nuclear magnetic resonance (NMR) relaxation-time measurements can provide critical information about the physiochemical properties of water-saturated media and are used often to characterize geologic materials. In unconsolidated sediments, the link between measured relaxation times and pore-scale properties can be complicated when diffusing water molecules couple the relaxation response of heterogeneous regions within a well-connected pore space. Controlled laboratory experiments have allowed us to investigate what factors control the extent of diffusional coupling in unconsolidated sediments and what information is conveyed by the relaxation-time distribution under varied conditions. A range of sediment samples exhibiting heterogeneity in the form of a bimodal mineralogy of quartz and hematite were mixed with varied mineral concentration and grain size. NMR relaxation measurements and geometric analysis of these mixtures demonstrate the importance of two critical length scales controlling the relaxation response: the diffusion length ℓD, describing the distance a water molecule diffuses during the NMR measurement, and the separation length ℓS, describing the scale at which heterogeneity occurs. For the condition of ℓS > ℓD, which prevails for samples with low hematite concentrations and coarser grain size, coupling is weak and the bimodal relaxation-time distribution independently reflects the relaxation properties of the two mineral constituents in the heterogeneous mixtures. For the condition of ℓS < ℓD, which prevails at higher hematite concentrations and finer grain size, the relaxation-time distribution no longer reflects the presence of a bimodal mineralogy but instead conveys a more complex averaging of the heterogeneous relaxation environments. This study has shown the potential extent and influence of diffusional coupling in unconsolidated heterogeneous sediments, and can serve to inform the interpretation of NMR measurements in near-surface environments where unconsolidated sediments are commonly encountered.


ACS Omega ◽  
2020 ◽  
Vol 5 (12) ◽  
pp. 6545-6555
Author(s):  
Mahmoud Elsayed ◽  
Guenther Glatz ◽  
Ammar El-Husseiny ◽  
Abdullah Alqubalee ◽  
Abdulrauf Adebayo ◽  
...  

2003 ◽  
Vol 58 (9-10) ◽  
pp. 537-540 ◽  
Author(s):  
Roman Goc

Monte Carlo simulations of complex rotation of single −CH3 groups, −(CH3)3 groups and −BH3 groups were performed for trimethylamine borane (CH3)3NBH3. In the course of these simulations the correlation functions for different models of rotation were determined. Knowledge of these functions and of some data extracted from NMR experiments allowed for the calculation of the longitudinal magnetic relaxation time T1 as a function of temperature. The values of relaxation times obtained from Monte Carlo simulations are compared to experimental results published by other authors. There is a clear relation between the assumed model of rotation and the shape of the T1 curve versus temperature.


2016 ◽  
Vol 6 (21) ◽  
pp. 7896-7901 ◽  
Author(s):  
Carmine D'Agostino ◽  
Mark R. Feaviour ◽  
Gemma L. Brett ◽  
Jonathan Mitchell ◽  
Andrew P. E. York ◽  
...  

Solvent inhibition over surfaces affects behaviour and performances of heterogeneous catalysts.


2021 ◽  
Vol 37 (2) ◽  
pp. 219-231
Author(s):  
Jean Frederic Isingizwe Nturambirwe ◽  
Willem Jacobus Perold ◽  
Umezuruike Linus Opara

HighlightsMeasurements of relaxation times in intact banana at micro-Tesla field was achieved.Bulk spin-spin relaxation time highly correlated with best descriptors of banana ripening.A basis for quasi-continuous distribution of spin-spin relaxation in banana was given.Abstract. Achieving fast, low-cost, and non-destructive internal quality testing techniques in the horticultural industry is a challenge. Developing techniques such as ultra-low field nuclear magnetic resonance (NMR) is a promising solution. Banana is a fast ripening fruit, which undergoes many changes in quality characteristics during ripening, and was chosen as a fit choice for extensive fruit quality study by NMR. A commercial NMR system using a superconducting quantum interference device (SQUID) as a sensor and operating at 100µT was used to measure changes that occurred in banana fruit during ripening. The longitudinal and transverse relaxation times (T1 and T2, respectively), were measured on fruit samples progressively drawn from a larger batch under storage. Physico-chemical attributes such as total soluble solids (TSS), titratable acidity (TA), pH, and color parameters were measured and used as reference measurements. Statistical analysis using cross-correlation, linear regression, analysis of variance (ANOVA), and principal components analysis (PCA) were performed to probe the relationships between various quality attributes. T1 showed high correlations with total soluble solids (R = 0.84), sugar:acid ratio (R = 0.84) and color parameters (R from 0.49 to 0.88). T2, on the other hand, was most highly correlated to pH (R = 0.76) but also had a statistically significant but negative correlation with Ri (-0.58 at p &lt;0.05). PCA results separated the first day from the remaining days of the ripening process and the overall variation was mostly explained by color attributes (a* and h), T1, TSS, and TSS/TA. During seven days of ripening in storage, the trend of change in the peel color of banana was best described by L*, a*, h and total color difference (TCD). The index of ripening, Ri, defined based on the apparent change in peel color was highly correlated to TSS, TSS/TA, L*, a*, h, TCD, and T1. The strong similarity between the evolution of T1 and the most commonly approved characteristics of banana ripening suggest that T1 has great potential for characterizing the ripening process of banana. However, an investigation of the full metabolic profile of banana during ripening would provide an understanding of the link between NMR relaxation and ripening characteristics. A distribution of T1 relaxation time of intact banana fruit at the micro-Tesla field was successfully generated using Laplace inversion. A suitable framework of T1-domain based studies on banana ripening also applicable to other fruit was discussed; it would provide a comprehensive understanding of structural changes and water mobility that occur in ripening banana. The SQUID-detected ultra-low field NMR used here shows promise as a tool for probing the quality of intact banana fruit. Keywords: Banana quality, Laplace inversion, Relaxometry, SQUID-NMR.


Holzforschung ◽  
2000 ◽  
Vol 54 (5) ◽  
pp. 501-504 ◽  
Author(s):  
K. Banas ◽  
B. Blicharska ◽  
W. Dietrich ◽  
M. Kluza

Summary On the basis of the proton NMR relaxation time dependencies on temperature and frequency in cellulose pulp a simple two-motion model of molecular dynamics has been proposed. The parameters, activation energies and correlation times, describing the model may be correlated with structure features such as level of crystallinity of cellulose with different origin, as well as degree of paper devastation.


Sign in / Sign up

Export Citation Format

Share Document