scholarly journals Stratigraphic architecture of the Mississippian limestone through integrated electrofacies classification, Hardtner field area, Kansas and Oklahoma

2018 ◽  
Vol 6 (4) ◽  
pp. T1095-T1115 ◽  
Author(s):  
Niles W. Wethington ◽  
Matthew J. Pranter
Keyword(s):  
Nearest Neighbor ◽  
Depositional Environments ◽  
Significant Heterogeneity ◽  
High Porosity ◽  
Reservoir Properties ◽  
Subaerial Exposure ◽  
Stratigraphic Framework ◽  
Complex Structural ◽  
Mississippian Limestone ◽  
Field Area

The Mississippian Limestone formed through complex structural, stratigraphic, and diagenetic processes involving subsidence, tectonic uplift leading to periodic subaerial exposure, changes in ocean chemistry, variability inherent with carbonate cyclicity, as well as postdepositional alteration. These geologic complexities led to significant heterogeneity and compartmentalization within Mississippian mid-continent reservoirs, obscuring stratigraphic relationships. A novel log-based approach, called derivative trend analysis (DTA), is used to identify and correlate depositional cycles associated with five major stratigraphic zones. In the absence of abundant and complete core data, DTA serves as a rudimentary, yet informative, tool to effectively develop a sequence-stratigraphic framework. Classifying electrofacies, especially those constrained to core observations, can elucidate key relationships between depositional environments and reservoir properties, as well as provide an improved understanding of spatial heterogeneity. Three methods of electrofacies classification (artificial neural network, [Formula: see text]-means clustering, and [Formula: see text] nearest neighbor clustering) provide varying accuracies when used to create predictive lithology logs based only on the combined signatures of open-hole well logs in noncored wells. Stratigraphic models produced from the integration of these lithology logs with an interpreted stratigraphic framework reveal a relatively uniform, flat-lying basal Kinderhookian section, overlain by prograding clinoforms with internally shoaling-upward cycles of limestone, shales, and spiculites deposited during the Osagean and Meramecian stages. The sequence is capped by a high-porosity unit comprised mostly of brecciated chert associated with subaerially exposed strata underlying the sub-Pennsylvanian unconformity. Toward the south and east of the Hardtner field area, Osagean strata thin significantly and are covered by Meramecian spiculites of the Cowley Formation. Spatial porosity distributions reveal high reservoir quality deposits associated with regressive phases of third-order cycles, with the highest porosity intervals occurring up-section and toward the northeast of Hardtner field.

scholarly journals Origin of Micropores In Late Jurassic (Oxfordian) Micrites of the Eastern Paris Basin, France

2015 ◽  
Vol 85 (6) ◽  
pp. 660-682 ◽  
Author(s):  
Cédric Carpentier ◽  
Serge Ferry ◽  
Christophe Lécuyer ◽  
André Strasser ◽  
Yves Géraud ◽  
...  
Keyword(s):  
Ostwald Ripening ◽  
High Porosity ◽  
Paris Basin ◽  
Reservoir Properties ◽  
Northern Margin ◽  
Oxygen And Carbon Isotope ◽  
Subaerial Exposure ◽  
Deep Aquifers ◽  
Stable Oxygen

Abstract:  Porous micritic facies, either primary chalks or resulting from secondary destructive micritization, can constitute important hydrocarbon or water reservoirs. Characterization of reservoir properties and the understanding of factors which controlled the distribution of porosity are of primary interest to evaluate the prospective reserves. Middle and late Oxfordian limestones of the eastern Paris Basin show several horizons with porosities higher than 20%. The porosity is mainly microporous and located either within secondary micritized grains or in the micritic matrix. Using SEM, cathodoluminescence, as well as confocal microscopy, stable oxygen and carbon isotope ratios, and petrophysical measurements, a scenario for the evolution of the micropores is proposed. Lime mudstones to packstones constitute the majority of the high-porosity facies (HPFs). Inner lagoonal deposits are more micritized and thus more porous than grainstones, and facies rich in leiolitic oncoids and echinoid clasts are less impacted by micritization. Micritization was responsible for an increase of the intragranular porosity in most grain types. During both eogenesis and shallow burial, mineralogical stabilization dissolved aragonitic particles and allowed precipitation of calcite rhombs. This process was probably enhanced below surfaces of subaerial exposure. During burial, Ostwald ripening allowed the growth of larger micrite crystals at the expense of smaller ones during early Berriasian and late Aptian recharges of deep aquifers when the northern margin of the basin was exposed. Overgrowths on micrite crystals were more important in intervals strongly affected by chemical compaction, which favored oversaturation of waters with respect to calcite. In low-porosity horizons (LPFs), the dense micritic texture of oncoids and the monocrystalline architecture of echinoid clasts prevented an intense micritization, while the strong chemical compaction enhanced poronecrosis. Telogenetic fracturing created new fluid pathways that favored inputs of meteoric fluid in porous micrite and allowed the continuation of Ostwald ripening during Cenozoic times. As a whole, mesogenetic inputs of waters undersaturated with respect to calcite in deep aquifers during exposure of basin margins are a more efficient process than early subaerial exposure for enhancing aggrading neomorphism and appearance of microporous micrites. Initial mineralogical heterogeneities also impact the intensity of chemical compaction and thus the stratigraphical distribution of microporous limestones.

scholarly journals Petrophysical Properties of Nahr Umar Formation in Nasiriya Oil Field

2020 ◽  
Vol 21 (3) ◽  
pp. 9-18
Author(s):  
Ahmed Abdulwahhab Suhail ◽  
Mohammed H. Hafiz ◽  
Fadhil S. Kadhim
Keyword(s):  
Gamma Ray ◽  
Water Saturation ◽  
Oil Field ◽  
Well Logs ◽  
High Porosity ◽  
Reservoir Properties ◽  
Petrophysical Parameters ◽  
Resistivity Logs ◽  
Lithology Prediction ◽  
Porosity And Permeability

   Petrophysical characterization is the most important stage in reservoir management. The main purpose of this study is to evaluate reservoir properties and lithological identification of Nahr Umar Formation in Nasiriya oil field. The available well logs are (sonic, density, neutron, gamma-ray, SP, and resistivity logs). The petrophysical parameters such as the volume of clay, porosity, permeability, water saturation, were computed and interpreted using IP4.4 software. The lithology prediction of Nahr Umar formation was carried out by sonic -density cross plot technique. Nahr Umar Formation was divided into five units based on well logs interpretation and petrophysical Analysis: Nu-1 to Nu-5. The formation lithology is mainly composed of sandstone interlaminated with shale according to the interpretation of density, sonic, and gamma-ray logs. Interpretation of formation lithology and petrophysical parameters shows that Nu-1 is characterized by low shale content with high porosity and low water saturation whereas Nu-2 and Nu-4 consist mainly of high laminated shale with low porosity and permeability. Nu-3 is high porosity and water saturation and Nu-5 consists mainly of limestone layer that represents the water zone.

Block tilting of the North Provence early Cretaceous carbonate margin: stratigraphic, sedimentologic and tectonic data

2009 ◽  
Vol 180 (2) ◽  
pp. 105-115 ◽  
Author(s):  
Jean-Pierre Masse ◽  
Michel Villeneuve ◽  
Emmanuelle Leonforte ◽  
Jean Nizou
Keyword(s):  
Early Cretaceous ◽  
Biological Diversity ◽  
Carbonate Platform ◽  
Depositional Environments ◽  
Structural Elements ◽  
The North ◽  
Subaerial Exposure ◽  
Tectonic Events ◽  
Complete Series ◽  
Structural Architecture

Abstract In the western part of the Castellane tectonic arc, the so-called “ Provence platform area “, corresponding to the foreland of the Alpine nappes (figs. 1–2), is marked by Tithonian-Berriasian shallow water carbonates capped by hemipelagic sediments deposited from the Valanginian up to the Aptian-Albian. A detailed biostratigraphic study of the Berriasian succession, based on calcareous algae and foraminifera, allows us to distinguish a Lower to Middle Berriasian, with Clypeina sulcata, Clypeina isabellae and Holosporella sarda, from an Upper Berriasian with Pfenderina neocomiensis, Danubiella cernavodensis, Falsolikanella campanensis and Macroporella praturloni (fig. 3). We performed a field survey of 30 sites located from Quinson to the west, and Escragnolles to the east (figs. 4–5) including the study of measured stratigraphic sections and the collection of samples for biostratigraphic interpretations. These stratigraphic investigations show that below the Valanginian beds, the Berriasian platfom carbonate succession, is locally incomplete, i.e. Upper Berriasian beds are frequently absent. During the Early and Middle Berriasian, depositional environments are marked by a strong bathymetric instability, with frequent subaerial exposure events, and a significant marine restriction; by contrast, during the Late Berriasian, the overall biological diversity increases and water agitation as well, which means a significant marine opening towards the basin. The Upper Berriasian hiatus is consequently regarded as the result of a Berriasian/Valanginian and/or a lowermost Valanginian erosion (fig. 6). The spatial distribution of complete or truncated Berriasian successions identifies east-west bands, in each band truncated series are located northward and complete series are located southward. Bands are limited by thrust or strip faults interpreted as palaeofaults reactivated during the Alpine orogeny (fig. 7). These fault-bounded blocks, 3 to 10 km in width, known as the Aiguine, La Palud-sur-Verdon, Carajuan-Audibergue and Peyroulles-La Foux blocks, are southerly rotated by 1 to 2o. We regard this structural architecture as the result of basinward tilting of blocks. Due to their rotation, the uplifted parts were eroded whereas the depressed parts were protected against erosion (fig. 8). Such a dynamic behavior reflects a distensive tectonic regime, which has been active at least during the Valanginian, that is after the drowning of the North-Provence carbonate platform. These structural events are considered as the regional expression of the Neocimmerian tectonic phase coupled with an enhancement of the Atlantic rifting. The orientation of the major Alpine structural elements (folds and faults) of the Castellane arc, is mostly inherited from these early Cretaceous tectonic events.

The Cambrian Basal Sandstone Unit in central Alberta — an investigation of temperature distribution, petrography, and hydraulic and geomechanical properties of a deep saline aquifer

2014 ◽  
Vol 51 (8) ◽  
pp. 783-796 ◽  
Author(s):  
Simon Weides ◽  
Inga Moeck ◽  
Jacek Majorowicz ◽  
Matthias Grobe
Keyword(s):  
Geothermal Gradient ◽  
High Porosity ◽  
Reservoir Properties ◽  
Geothermal Heat ◽  
Hydraulic Stimulation ◽  
Deep Saline Aquifer ◽  
Thin Sections ◽  
Geomechanical Properties ◽  
Western Canada Sedimentary Basin ◽  
Porosity And Permeability

Recent geothermal exploration indicated that the Cambrian Basal Sandstone Unit (BSU) in central Alberta could be a potential target formation for geothermal heat production, due to its depth and extent. Although several studies showed that the BSU in the shallower Western Canada Sedimentary Basin (WCSB) has good reservoir properties, almost no information exists from the deeper WCSB. This study investigated the petrography of the BSU in central Alberta with help of drill cores and thin sections from six wells. Porosity and permeability as important reservoir parameters for geothermal utilization were determined by core testing. The average porosity and permeability of the BSU is 10% and <1 × 10−14 m2, respectively. A zone of high porosity and permeability was identified in a well located in the northern part of the study area. This study presents the first published geomechanical tests of the BSU, which were obtained as input parameters for the simulation of hydraulic stimulation treatments. The BSU has a relatively high unconfined compressive strength (up to 97.7 MPa), high cohesion (up to 69.8 MPa), and a remarkably high friction coefficient (up to 1.22), despite a rather low tensile strength (<5 MPa). An average geothermal gradient of 35.6 °C/km was calculated from about 2000 temperature values. The temperature in the BSU ranges from 65 to 120 °C. Results of this study confirm that the BSU is a potential geothermal target formation, though hydraulic stimulation treatments are required to increase the permeability of the reservoir.

West Africa Lacustrine Pre-Salt Carbonates: How Interaction of Tectonics and Diagenesis Produced Different Reservoir Facies

2016 ◽  
Author(s):  
Paola Ronchi ◽  
Giovanni Gattolin ◽  
Alfredo Frixa ◽  
Chiara Margliulo
Keyword(s):  
Congo Basin ◽  
High Porosity ◽  
Carbonate Platforms ◽  
Pore System ◽  
Reservoir Properties ◽  
Deep Faults ◽  
Facies Associations ◽  
Porosity And Permeability ◽  
Hydrothermal Dolomite ◽  
Reservoir Facies

ABSTRACT During the Early Cretaceous South-Atlantic opening, in large lacustrine basins a series of shallow water carbonate platforms grew along lake margins and paleo-highs. These carbonates are giant reservoirs in the Brasil offshore, while in Angola are productive in Cabinda (Lower Congo Basin) and are being explored in the Kwanza Basin with minor success. These carbonates have peculiar facies associations represented mainly by microbialites and coquinas, and are affected by dolomitization which modified the original pore system in different ways. In presence of deep-seated extensional faults, bounding the paleo-highs, the hydrothermal dolomitization affected the reservoir carbonate improving its quality; in fact the hydrothermal dolomite produced the so-called zebra dolomite which is characterized by high porosity and permeability. On the other hand, when there is a limited influx of hydrothermal fluid, some dolomitization is observed, but it did not produce the zebra facies and the poro-perm system has lower quality. These two examples suggest that the understanding of the distribution of deep faults may help in the prediction of the diagenetic effects and resulting reservoir properties.

scholarly journals Three-Dimensional Modeling and Fluid Flow Simulation for the Quantitative Description of Permeability Anisotropy in Tidal Flat Carbonate

Energies ◽  
2020 ◽  
Vol 13 (21) ◽  
pp. 5557
Author(s):  
Hassan A. Eltom ◽  
Nabil A. Saraih ◽  
Oliver G. Esteva ◽  
Lundi Kusuma ◽  
Saleh Ahmed ◽  
...  
Keyword(s):  
Fluid Flow ◽  
Tidal Flat ◽  
Three Dimensional ◽  
Flow Simulation ◽  
3D Models ◽  
Depositional Environments ◽  
High Permeability ◽  
Stratigraphic Framework ◽  
Permeability Anisotropy ◽  
Lithofacies Association

Three-dimensional (3D) facies and petrophysical models were generated from previously published data of carbonate strata in the Dam Formation (eastern Saudi Arabia) to quantitatively investigate, describe, understand, model, and predict the permeability anisotropy in tidal flat carbonate on the basis of a sequence stratigraphic framework. The resulting 3D models were used to conduct fluid flow simulations to demonstrate how permeability anisotropy influences the production of hydrocarbons and ultimately affects decisions concerning future drilling in the exploration and development of carbonate reservoirs with tidal flat strata. The constructed 3D facies model consists of four lithofacies associations, two of which are grain-dominated associations and two of which are mud-dominated associations. These lithofacies associations vary spatially in four reservoir zones (zones 1 to 4), which represent two fourth-order sequences in the uppermost part of the Dam Formation. Zones 1 and 3 consist of transgressive parasequences, and zones 2 and 4 consist of the regressive parasequences of these sequences. The 3D porosity and permeability models have a coherent match with the distribution of the lithofacies and the stratigraphic framework of the Dam Formation. The results suggest that the permeability anisotropy in zones 1 and 3 is controlled by the occurrence of the grain-dominated lithofacies associated with tidal flat channels. This lithofacies association overlies the sequence boundaries of sequences 1 and 3, forms reservoir bodies with relatively high permeability values, and is elongated perpendicular to the shoreline of the depositional environment. In contrast, permeability anisotropy in zones 2 and 4 is thought to be controlled by the occurrence of the grain-dominated lithofacies associated with the oolitic shoal. This lithofacies association overlies the maximum flooding surface of sequences 2 and 4, forms reservoir bodies with relatively high permeability values, and is elongated parallel to the shoreline of the depositional environments. Fluid flow simulation results suggest that the trend in hydrocarbon production from the constructed 3D models depends on permeability anisotropy in each reservoir zone. Thus, recognizing trends in permeability anisotropy, which can be predicted using sequence stratigraphy, could help to identify potential areas for future drilling.

scholarly journals Biothems: sequence stratigraphic units and their implications for regional tectono-stratigraphic interpretations

1992 ◽  
Vol 6 ◽  
pp. 176-176
Author(s):  
H. R. Lane ◽  
M. W. Frye ◽  
G. D. Couples
Keyword(s):  
North American ◽  
Regional Distribution ◽  
Depositional Environments ◽  
Mississippi Valley ◽  
Basin And Range Province ◽  
Anadarko Basin ◽  
Sequence Stratigraphic ◽  
The North ◽  
Tectonic Events ◽  
Stratigraphic Framework

Biothems are regional wedge- or lens-shaped bodies of strata that are: bounded shelfward or cratonward by paleontologically recognizable unconformities; generally thicken on marine shelves, where they are typically conformable with underlying and overlying biothems; are commonly thinner or represent “starved” sequences further basinward; and in their most basinward extent, are either bounded by biostratigraphically recognizable unconformities or are conformable with underlying and overlying biothems. Biothems are practical units whose definition and degree of refinement are dependent on the quality and availability of biostratigraphic control. As recognized to date, biothems have a logical distribution of faunal and floral components, as well as facies groupings that represent internally consistent and logical sequences of depositional environments. The use of biothems as primary sequence stratigraphic units places the emphasis on relative time in a stratigraphic framework.A west-to-east transect within the North American Mississippian System, which extends from the Basin and Range Province, across the Transcontinental Arch (TA) and into the Anadarko Basin, was constructed to demonstrate the regional distribution and tectono-stratigraphic significance of biothems relative to the axis of the TA. The relationships portrayed on the transect, tied to an understanding of North American Mississippian paleogeography, imply that biothems deposited during relative highstand events on one flank of the TA are time-equivalent to biothems deposited during relative lowstand events on the opposite flank of the TA. This distribution is interpreted to have been controlled by intraplate tectonic events that formed “piano-key” basins along the flanks of the TA. The spatial patterns of these basins are not consistent with published models of basin evolution. A further conclusion is that the lack of transgressive or regressive coincident Mississippian biothems on either flank of the TA suggests that it is inadvisable to impose the Mississippi Valley-derived eustasy curve on western flank depositional sequences.

scholarly journals Reservoir and sealing properties of the Newark rift basin formations: Implications for carbon sequestration

2020 ◽  
Vol 39 (1) ◽  
pp. 38-46
Author(s):  
N. V. Zakharova ◽  
D. S. Goldberg ◽  
P. E. Olsen ◽  
D. Collins ◽  
D. V. Kent
Keyword(s):  
Carbon Sequestration ◽  
Atlantic Coast ◽  
High Porosity ◽  
Rift Basins ◽  
Reservoir Properties ◽  
Porous Flow ◽  
Mafic Intrusions ◽  
Porosity And Permeability ◽  
Structural Architecture ◽  
Newark Basin

The Newark Basin is one of the major Mesozoic rift basins along the U.S. Atlantic coast evaluated for carbon dioxide (CO2) storage potential. Its geologic setting offers an opportunity to assess both the traditional reservoir targets, e.g., fluvial sandstones, and less traditional options for CO2 storage, e.g., mafic intrusions and lavas. Select samples from the basal, predominantly fluvial, Stockton Formation are characterized by relatively high porosity (8%–18%) and air permeability (0.1–50 mD), but borehole hydraulic tests suggest negligible transmissivity even in the high-porosity intervals, emphasizing the importance of scale in evaluating reservoir properties of heterogeneous formations. A stratigraphic hole drilled by TriCarb Consortium for Carbon Sequestration in the northern basin also intersected numerous sandstone layers in the predominantly lacustrine Passaic Formation, characterized by core porosity and permeability up to 18% and 2000 mD. However, those layers are shallow (predominantly above 1 km in this part of the basin) and lack prominent caprock layers above. The mudstones in all three of the major sedimentary formations (Stockton, Lockatong, and Passaic) are characterized by a high CO2 sealing capacity — evaluated critical CO2 column heights exceed several kilometers. The igneous options are represented by basalt lavas, with porous flow tops and massive flow interiors, and a crystalline but often densely fractured Palisade Sill. The Newark Basin basalts may be too shallow for sequestration over most of the basin's area, but many other basalt flows exist in similar rift basins. Abundant fractures in sedimentary and igneous rocks are predominantly closed and/or sealed by mineralization, but stress indicators suggest high horizontal compressional stresses and strong potential for reactivation. Overall, the basin potential for CO2 storage appears low, but select formation properties are promising and could be investigated in the Newark Basin or other Mesozoic rift basins with similar fill but a different structural architecture.

Sign in / Sign up

Export Citation Format

Share Document