scholarly journals Petrophysical Properties of Nahr Umar Formation in Nasiriya Oil Field

2020 ◽  
Vol 21 (3) ◽  
pp. 9-18
Author(s):  
Ahmed Abdulwahhab Suhail ◽  
Mohammed H. Hafiz ◽  
Fadhil S. Kadhim
Keyword(s):  
Gamma Ray ◽  
Water Saturation ◽  
Oil Field ◽  
Well Logs ◽  
High Porosity ◽  
Reservoir Properties ◽  
Petrophysical Parameters ◽  
Resistivity Logs ◽  
Lithology Prediction ◽  
Porosity And Permeability

   Petrophysical characterization is the most important stage in reservoir management. The main purpose of this study is to evaluate reservoir properties and lithological identification of Nahr Umar Formation in Nasiriya oil field. The available well logs are (sonic, density, neutron, gamma-ray, SP, and resistivity logs). The petrophysical parameters such as the volume of clay, porosity, permeability, water saturation, were computed and interpreted using IP4.4 software. The lithology prediction of Nahr Umar formation was carried out by sonic -density cross plot technique. Nahr Umar Formation was divided into five units based on well logs interpretation and petrophysical Analysis: Nu-1 to Nu-5. The formation lithology is mainly composed of sandstone interlaminated with shale according to the interpretation of density, sonic, and gamma-ray logs. Interpretation of formation lithology and petrophysical parameters shows that Nu-1 is characterized by low shale content with high porosity and low water saturation whereas Nu-2 and Nu-4 consist mainly of high laminated shale with low porosity and permeability. Nu-3 is high porosity and water saturation and Nu-5 consists mainly of limestone layer that represents the water zone.

scholarly journals Evaluation of Petrophysical Properties Using Well Logs of Yamama Formation in Abu Amood Oil Field, Southern Iraq

2021 ◽  
Vol 54 (1E) ◽  
pp. 67-77
Author(s):  
Buraq Adnan Al-Baldawi
Keyword(s):  
Gamma Ray ◽  
Water Saturation ◽  
Bulk Water ◽  
Carbonate Reservoir ◽  
Oil Field ◽  
Well Logs ◽  
Water Volume ◽  
High Porosity ◽  
Petrophysical Properties ◽  
Reservoir Properties

The petrophysical analysis is very important to understand the factors controlling the reservoir quality and production wells. In the current study, the petrophysical evaluation was accomplished to hydrocarbon assessment based on well log data of four wells of Early Cretaceous carbonate reservoir Yamama Formation in Abu-Amood oil field in the southern part of Iraq. The available well logs such as sonic, density, neutron, gamma ray, SP, and resistivity logs for wells AAm-1, AAm-2, AAm-3, and AAm-5 were used to delineate the reservoir characteristics of the Yamama Formation. Lithologic and mineralogic studies were performed using porosity logs combination cross plots such as density vs. neutron cross plot and M-N mineralogy plot. These cross plots show that the Yamama Formation consists mainly of limestone and the essential mineral components are dominantly calcite with small amounts of dolomite. The petrophysical characteristics such as porosity, water and hydrocarbon saturation and bulk water volume were determined and interpreted using Techlog software to carried out and building the full computer processed interpretation for reservoir properties. Based on the petrophysical properties of studied wells, the Yamama Formation is divided into six units; (YB-1, YB-2, YB-3, YC-1, YC-2 and YC-3) separated by dense non porous units (Barrier beds). The units (YB-1, YB-2, YC-2 and YC-3) represent the most important reservoir units and oil-bearing zones because these reservoir units are characterized by good petrophysical properties due to high porosity and low to moderate water saturation. The other units are not reservoirs and not oil-bearing units due to low porosity and high-water saturation.

scholarly journals Petrophysical Analysis of Well Logs for Asmari Reservoir in Abu Ghirab Oil Field, South Eastern Iraq

2020 ◽  
pp. 2979-2990
Author(s):  
Buraq Adnan Al-Baldawi
Keyword(s):  
Gamma Ray ◽  
Water Saturation ◽  
Bulk Water ◽  
Computer Processing ◽  
Oil Field ◽  
Well Logs ◽  
Asmari Formation ◽  
Petrophysical Properties ◽  
Resistivity Logs ◽  
Environmental Corrections

The present study includes the evaluation of petrophysical properties and lithological examination in two wells of Asmari Formation in Abu Ghirab oil field (AG-32 and AG-36), Missan governorate, southeastern Iraq. The petrophysical assessment was performed utilizing well logs information to characterize Asmari Formation. The well logs available, such as sonic, density, neutron, gamma ray, SP, and resistivity logs, were converted into computerized data using Neuralog programming. Using Interactive petrophysics software, the environmental corrections and reservoir parameters such as porosity, water saturation, hydrocarbon saturation, volume of bulk water, etc. were analyzed and interpreted. Lithological, mineralogical, and matrix recognition studies were performed using porosity combination cross plots. Petrophysical characteristics were determined and plotted as computer processing interpretation (CPI) using Interactive Petrophysics program. Based on petrophysical properties, Asmari Reservoir in Abu Ghirab oil field is classified into three sub formations: Jeribe/ Euphrates and Kirkuk group which is divided into two zones: upper Kirkuk zone, and Middle-Lower Kirkuk zone. Interpretation of well logs of Asmari Formation indicated a commercial Asmari Formation production with medium oil evidence in some ranges of the formation, especially in the upper Kirkuk zone at well X-1. However, well X-2, especially in the lower part of Jeribe/ Euphrates and Middle-Lower Kirkuk zone indicated low to medium oil evidence. Lithology of Asmari Formation demonstrated a range from massive dolomite in Jeribe/ Euphrates zone to limestone in upper Kirkuk zone and limestone and sandstone in middle-lower Kirkuk zone, whereas mineralogy of the reservoir showed calcite and dolomite with few amounts of anhydrite.

scholarly journals An Integrated Microfacies and Well Logs-Based Reservoir Characterization of Yamama Formation, Southern Iraq

2021 ◽  
pp. 3570-3586
Author(s):  
Mohanad M. Al-Ghuribawi ◽  
Rasha F. Faisal
Keyword(s):  
Reservoir Characterization ◽  
Water Saturation ◽  
Effective Porosity ◽  
Well Logs ◽  
Petrophysical Properties ◽  
Reservoir Properties ◽  
Thin Sections ◽  
Porosity And Permeability ◽  
South Of Iraq ◽  
Southern Iraq

     The Yamama Formation includes important carbonates reservoir that belongs to the Lower Cretaceous sequence in Southern Iraq. This study covers two oil fields (Sindbad and Siba) that are distributed Southeastern Basrah Governorate, South of Iraq. Yamama reservoir units were determined based on the study of cores, well logs, and petrographic examination of thin sections that required a detailed integration of geological data and petrophysical properties. These parameters were integrated in order to divide the Yamama Formation into six reservoir units (YA0, YA1, YA2, YB1, YB2 and YC), located between five cap rock units. The best facies association and petrophysical properties were found in the shoal environment, where the most common porosity types were the primary (interparticle) and secondary (moldic and vugs) . The main diagenetic process that occurred in YA0, YA2, and YB1 is cementation, which led to the filling of pore spaces by cement and subsequently decreased the reservoir quality (porosity and permeability). Based on the results of the final digital  computer interpretation and processing (CPI) performed by using the Techlog software, the units YA1 and YB2 have the best reservoir properties. The unit YB2 is characterized by a good effective porosity average, low water saturation, good permeability, and large thickness that distinguish it from other reservoir units.

scholarly journals Shale volume and permeability of the Miocene unconsolidated turbidite sands of Bonga oil field, Niger delta, Nigeria

2017 ◽  
Vol 5 (1) ◽  
pp. 37 ◽  
Author(s):  
Inyang Namdie ◽  
Idara Akpabio ◽  
Agbasi Okechukwu .E.
Keyword(s):  
Niger Delta ◽  
Gamma Ray ◽  
Water Saturation ◽  
Strong Dependence ◽  
Water Injection ◽  
Oil Field ◽  
Reservoir Properties ◽  
Injection Wells ◽  
Log Data ◽  
Shale Volume

Bonga oil field is located 120km (75mi) southeast of the Niger Delta, Nigeria. It is a subsea type development located about 3500ft water depth and has produced over 330 mmstb of hydrocarbon till date with over 16 oil producing and water injection wells. The producing formation is the Middle to Late Miocene unconsolidated turbidite sandstones with lateral and vertical homogeneities in reservoir properties. This work, analysis the petrophysical properties of the reservoir units for the purpose of modeling the effect of shale content on permeability in the reservoir. Turbidite sandstones are identified by gamma-ray log signatures as intervals with 26-50 API, while sonic, neutron, resistivity, caliper and other log data are applied to estimate volume of shale ranging between 0.972 v/v for shale intervals and 0.0549 v/v for turbidite sands, water saturation of 0.34 v/v average in most sand intervals, porosity range from 0.010 for shale intervals to 0.49 v/v for clean sands and permeability values for the send interval 11.46 to2634mD, for intervals between 7100 to 9100 ft., Data were analyzed using the Interactive Petrophysical software that splits the whole curve into sand and shale zones and estimates among other petrophysical parameters the shale contents of the prospective zones. While Seismic data revealed reservoir thickness ranging from 25ft to over 140ft well log data within the five wells have identified sands of similar thickness and estimated average permeability of700mD. Within the sand units across the five wells, cross plots of estimated porosity, volume of shale and permeability values reveal strong dependence of permeability on shale volume and a general decrease in permeability in intervals with shale volume. It is concluded that sand units with high shale contents that are from0.500 to0.900v/v will not provide good quality reservoir in the field.

scholarly journals Depositional Environment and facies analysis of Useni- 1, Niger Delta Basin, using well logs, core data

2019 ◽  
Vol 7 (1) ◽  
pp. 58
Author(s):  
G. O. Aigbadon ◽  
E. O. Akpunonu ◽  
S. O. Agunloye ◽  
A. Ocheli ◽  
O. O .Akakaru
Keyword(s):  
Gamma Ray ◽  
Water Saturation ◽  
Oil Field ◽  
Well Logs ◽  
Depth Range ◽  
Depositional Facies ◽  
Core Data ◽  
Delta Plain ◽  
Niger Delta Basin ◽  
Gamma Ray Log

This study was carried out integrating well logs and core to build reservoir model for the Useni-1 oil field. Core data and well logs were used to evaluate the petrophysical characteristics of the reservoirs. The paleodepositional environment was deduce from the wells and cores data. The depositional facies model showed highly permeable channels where the wells where positioned. The environments identified that the fluvial channel facies with highly permeable zones constituted the reservoirs. Four reservoirs were mapped at depth range of 8000ft to 8400ft with thicknesses varying from 20ft to 400ft. Petrophysical results showed that porosity of the reservoirs varied from 12% to 28 %; permeability from 145.70 md to 454.70md; water saturation from 21.65% to 54.50% and hydrocarbon saturation from 45.50% to 78.50 %. Core data and the gamma ray log trends with right boxcar trend indicate fluvial point bar and tidal channel fills in the lower delta plain setting. By-passed hydrocarbons were identified in low resistivity pay sands D1, D2 at depth of 7800 – 78100ft in the field.  

scholarly journals Characterization of Mishrif Formation Reservoir in Amara Oil Field, Southeast Iraq, Using Geophysical Well-logging

2021 ◽  
pp. 4702-4711
Author(s):  
Asmaa Talal Fadel ◽  
Madhat E. Nasser
Keyword(s):  
Reservoir Characterization ◽  
Gamma Ray ◽  
Water Saturation ◽  
Total Porosity ◽  
Effective Porosity ◽  
Oil Field ◽  
Neutron Density ◽  
Reservoir Water ◽  
Resistivity Logs ◽  
Reliable Knowledge

     Reservoir characterization requires reliable knowledge of certain fundamental properties of the reservoir. These properties can be defined or at least inferred by log measurements, including porosity, resistivity, volume of shale, lithology, water saturation, and permeability of oil or gas. The current research is an estimate of the reservoir characteristics of Mishrif Formation in Amara Oil Field, particularly well AM-1, in south eastern Iraq. Mishrif Formation (Cenomanin-Early Touronin) is considered as the prime reservoir in Amara Oil Field. The Formation is divided into three reservoir units (MA, MB, MC). The unit MB is divided into two secondary units (MB1, MB2) while the unit MC is also divided into two secondary units (MC1, MC2). Using Geoframe software, the available well log images (sonic, density, neutron, gamma ray, spontaneous potential, and resistivity logs) were digitized and updated. Petrophysical properties, such as porosity, saturation of water, saturation of hydrocarbon, etc. were calculated and explained. The total porosity was measured using the density and neutron log, and then corrected to measure the effective porosity by the volume content of clay. Neutron -density cross-plot showed that Mishrif Formation lithology consists predominantly of limestone. The reservoir water resistivity (Rw) values of the Formation were calculated using Pickett-Plot method.   

scholarly journals Permeability Estimation of Khasib Formation in Amara Oil Field from Well logs Data Using Multilinear Regression Technique and Empirical

2016 ◽  
Vol 6 (1) ◽  
Author(s):  
Buraq Adnan. Al-Baldawi
Keyword(s):  
Water Saturation ◽  
Statistical Correlation ◽  
Oil Field ◽  
Regression Technique ◽  
Well Logs ◽  
Multilinear Regression ◽  
Irreducible Water Saturation ◽  
Porosity And Permeability ◽  
Empirical Approaches ◽  
Interconnected Pores

Permeability is the property that permits the passage of fluids through the interconnected pores of a rock. It is one of the most important, most spatially variable, most uncertain, and  hence  least  predictable transport properties of porous formations. This paper represents a method to predict permeability of Khasib Formation in two wells (Am-1,Am-2) of Amara field using Multilinear regression (MLR) technique and various empirical models, such as Tixier’s, Timur’s and Coates and Dumanoir equations, are used to quantify permeability from well log calculations of porosity and irreducible water saturation. Measured porosity and permeability data from plugs of the available core intervals were used for validation of the predicated data from the logs. The calculated permeability values were compared with the laboratory measurements of core samples to those estimated from different empirical approaches, such as Tixier, Timur, Coates and Dumanoir models, as well as multilinear regression technique by using the statistical correlation coefficient (R2). The present study indicates that Multilinear regression (MLR) technique is the best method and the most validity to estimate permeability from well logs data.

scholarly journals Hartha Formation divisions Based on Well Logs Analysis in Majnoon Oil Field, Southern Iraq

2020 ◽  
pp. 1362-1369
Author(s):  
Gheed Chaseb ◽  
Thamer A. Mahdi
Keyword(s):  
Water Saturation ◽  
Effective Porosity ◽  
Oil Field ◽  
Well Logs ◽  
Petrophysical Properties ◽  
Reservoir Properties ◽  
Thin Sections ◽  
Facies Associations ◽  
Log Interpretation ◽  
Well Logs Interpretation

This study aims to evaluate reservoir characteristics of Hartha Formation in Majnoon oil field based on well logs data for three wells (Mj-1, Mj-3 and Mj-11). Log interpretation was carried out by using a full set of logs to calculate main petrophysical properties such as effective porosity and water saturation, as well as to find the volume of shale. The evaluation of the formation included computer processes interpretation (CPI) using Interactive Petrophysics (IP) software.  Based on the results of CPI, Hartha Formation is divided into five reservoir units (A1, A2, A3, B1, B2), deposited in a ramp setting. Facies associations is added to well logs interpretation of Hartha Formation, and was inferred by a microfacies analysis of thin sections from core and cutting samples. The CPI shows that the A2 is the main oil- bearing unit, which is characterized by good reservoir properties, as indicated by high effective porosity, low water saturation, and low shale volume. Less important units include A1 and A3, because they have low petrophysical properties compared to the unit A2.

scholarly journals Reservoir units of Mishrif Formation in Majnoon Oil field, Southern Iraq

2019 ◽  
pp. 2656-2663
Author(s):  
Layla khudhur Abbas ◽  
Thamar Abdullah Mahdi
Keyword(s):  
Gamma Ray ◽  
Water Saturation ◽  
High Volume ◽  
Effective Porosity ◽  
Oil Field ◽  
Reservoir Properties ◽  
Marine Facies ◽  
Wireline Logs ◽  
Low Volume ◽  
Southern Iraq

The reservoir units of Mishrif Formation in Majnoon oil field were studied by using available wireline logs (gamma ray, porosity and resistivity) and facies that derived from core and cutting samples for three wells including Mj-1, Mj-15, and Mj-20. The reservoir properties were determined and interpreted by using IP software. The results showed that unit D have the best reservoir properties due to high effective porosity, low water saturation and very low volume of shale. Furthermore, a large part of this unit was deposited in shoal environment. The other reservoir units are then graded in reservoir properties including units B, A, F & E respectively, except unit C, which is considered as a cap unit, because it consists of restricted marine facies so that; it has high volume of shale and water saturation and very low effective porosity.

scholarly journals Petrophysical Evaluation of Mauddud Formation in Selected Wells from Ratawi Oil Field, Southern Iraq

2021 ◽  
pp. 2956-2969
Author(s):  
Humam Q. Hameed ◽  
Afrah H. Saleh
Keyword(s):  
Water Saturation ◽  
High Water ◽  
Effective Porosity ◽  
Oil Field ◽  
Well Logs ◽  
Reservoir Properties ◽  
Oil Saturation ◽  
Shale Volume ◽  
Southern Iraq ◽  
Petrophysical Evaluation

    The objective of this paper is determining the petrophysical properties of the Mauddud Formation (Albian-Early Turonian) in Ratawi Oil Field depending on the well logs data by using interactive petrophysical software IP (V4.5). We evaluated parameters of available logs that control the reservoir properties of the formation, including shale volume, effective porosity, and water saturation. Mauddud Formation is divided into five units, which are distinguished by various reservoir characteristics. These units are A, B, C, D, and E. Through analyzing results of the computer processed interpretation (CPI) of available wells, we observed that the main reservoir units are B and D, being distinguished by elevated values of effective porosity (10%-32%) and oil saturation (95%-30%) with low shale content (6%-30%). Whereas, units A, C, and E were characterized by low or non-reservoir properties, due to high water saturation and low values of effective porosity caused by increased volume shale.

Sign in / Sign up

Export Citation Format

Share Document