Laser-Assisted AC Measurement of Thin-Film Thermal Diffusivity with Different Laser Beam Configurations

2021 ◽  
pp. 195-206
Author(s):  
X. Y. Yu ◽  
L. Zhang ◽  
G. Chen
MRS Bulletin ◽  
1992 ◽  
Vol 17 (2) ◽  
pp. 30-36 ◽  
Author(s):  
Jeff Cheung ◽  
Jim Horwitz

The laser, as a source of “pure” energy in the form of monochromatic and coherent photons, is enjoying ever increasing popularity in diverse and broad applications from drilling micron-sized holes on semiconductor devices to guidance systems used in drilling a mammoth tunnel under the English Channel. In many areas such as metallurgy, medical technology, and the electronics industry, it has become an irreplaceable tool.Like many other discoveries, the various applications of the laser were not initially defined but were consequences of natural evolution led by theoretical studies. Shortly after the demonstration of the first laser, the most intensely studied theoretical topics dealt with laser beam-solid interactions. Experiments were undertaken to verify different theoretical models for this process. Later, these experiments became the pillars of many applications. Figure 1 illustrates the history of laser development from its initial discovery to practical applications. In this tree of evolution, Pulsed Laser Deposition (PLD) is only a small branch. It remained relatively obscure for a long time. Only in the last few years has his branch started to blossom and bear fruits in thin film deposition.Conceptually and experimentally, PLD is extremely simple, probably the simplest among all thin film growth techniques. Figure 2 shows a schematic diagram of this technique. It uses pulsed laser radiation to vaporize materials and to deposit thin films in a vacuum chamber. However, the beam-solid interaction that leads to evaporation/ablation is a very complex physical phenomenon. The theoretical description of the mechanism is multidisciplinary and combines equilibrium and nonequilibrium processes. The impact of a laser beam on the surface of a solid material, electromagnetic energy is converted first into electronic excitation and then into thermal, chemical, and even mechanical energy to cause evaporation, ablation, excitation, and plasma formation.


2010 ◽  
Vol 470 (7-8) ◽  
pp. 365-368 ◽  
Author(s):  
Y.Y. Kim ◽  
H.A. Alwi ◽  
Q. Huang ◽  
R. Abd-Shukor ◽  
C.F. Tsai ◽  
...  

2001 ◽  
Vol 2001.50 (0) ◽  
pp. 39-40
Author(s):  
Toshihiro Kobayashi ◽  
Jun Ohsawa ◽  
Naohiro Yamaguchi ◽  
Tamio Hara

1977 ◽  
Vol 4 (3-4) ◽  
pp. 179-183 ◽  
Author(s):  
Zs. Illyefalvi-Vitéz

The physical processes of arc erosive micromachining and the influence of trimming on the parameters of resistors have been examined, and thin film resistors without trimming are compared with those trimmed by arc erosion and laser beam machining.In the paper a theoretical model for arc erosion of thin films is proposed. The optimal conditions of arc erosive trimming are determined. The shape of the cuts are recorded and examined. The applicability of arc erosive trimming with respect to stability is proved. A measuring method is introduced for resistors trimmed by arc erosion using a direct current generator.


2013 ◽  
Vol 115 (6) ◽  
pp. 843-847
Author(s):  
L. A. Ageev ◽  
V. K. Miloslavskii ◽  
V. I. Lymar ◽  
V. M. Reznikova
Keyword(s):  

Sign in / Sign up

Export Citation Format

Share Document