scholarly journals Kinetics of Solid-State Synthesis of Quaternary Cu2FeSnS4 (Stannite) Nanocrystals for Solar Energy Applications

2017 ◽  
Vol 131 (4) ◽  
pp. 1153-1155 ◽  
Author(s):  
P. Baláž ◽  
M. Baláž ◽  
A. Zorkovská ◽  
I. Škorvánek ◽  
Z. Bujňáková ◽  
...  
Catalysts ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 723
Author(s):  
Mahesh Muraleedharan Nair ◽  
Stéphane Abanades

The CeO2/CeO2−δ redox system occupies a unique position as an oxygen carrier in chemical looping processes for producing solar fuels, using concentrated solar energy. The two-step thermochemical ceria-based cycle for the production of synthesis gas from methane and solar energy, followed by CO2 splitting, was considered in this work. This topic concerns one of the emerging and most promising processes for the recycling and valorization of anthropogenic greenhouse gas emissions. The development of redox-active catalysts with enhanced efficiency for solar thermochemical fuel production and CO2 conversion is a highly demanding and challenging topic. The determination of redox reaction kinetics is crucial for process design and optimization. In this study, the solid-state redox kinetics of CeO2 in the two-step process with CH4 as the reducing agent and CO2 as the oxidizing agent was investigated in an original prototype solar thermogravimetric reactor equipped with a parabolic dish solar concentrator. In particular, the ceria reduction and re-oxidation reactions were carried out under isothermal conditions. Several solid-state kinetic models based on reaction order, nucleation, shrinking core, and diffusion were utilized for deducing the reaction mechanisms. It was observed that both ceria reduction with CH4 and re-oxidation with CO2 were best represented by a 2D nucleation and nuclei growth model under the applied conditions. The kinetic models exhibiting the best agreement with the experimental reaction data were used to estimate the kinetic parameters. The values of apparent activation energies (~80 kJ·mol−1 for reduction and ~10 kJ·mol−1 for re-oxidation) and pre-exponential factors (~2–9 s−1 for reduction and ~123–253 s−1 for re-oxidation) were obtained from the Arrhenius plots.


RSC Advances ◽  
2016 ◽  
Vol 6 (29) ◽  
pp. 24203-24209 ◽  
Author(s):  
Betina Tabah ◽  
Indra Neel Pulidindi ◽  
Venkateswara Rao Chitturi ◽  
Leela Mohana Reddy Arava ◽  
Aharon Gedanken

Solar-energy driven solid-state fermentation was developed for continuous bioethanol production from glucose. Bioethanol was tested in alkaline-acid direct ethanol fuel cells for its potential as fuel.


2016 ◽  
Vol 13 (5) ◽  
pp. 531-538 ◽  
Author(s):  
Sini K. Radhakrishnan ◽  
Ronald G. Shimmon ◽  
Costa Conn ◽  
Anthony T. Baker

2006 ◽  
Vol 51 (1) ◽  
pp. 46-50 ◽  
Author(s):  
A. L. Podkorytov ◽  
S. R. Kudakaeva ◽  
E. V. Sokolova ◽  
S. A. Shtin ◽  
D. N. Ashikhmin

Solar Energy ◽  
2017 ◽  
Vol 153 ◽  
pp. 173-180 ◽  
Author(s):  
Kunal J. Tiwari ◽  
Raju Chetty ◽  
Ramesh Chandra Mallik ◽  
P. Malar

2015 ◽  
Vol 17 (34) ◽  
pp. 22152-22159 ◽  
Author(s):  
C. W. Duan ◽  
L. X. Hu ◽  
Y. Sun ◽  
H. P. Zhou ◽  
H. Yu

An investigation of the kinetics of the solid state reaction between nanocrystalline magnesium hydride (MgH2) and aluminum chloride (AlCl3).


2011 ◽  
Vol 3 (7) ◽  
pp. 335-340
Author(s):  
Ashok Vishram Borhade ◽  
◽  
Vishwas Bhaskar Gaikwad ◽  
Yogeshwar Rajaram Baste

Author(s):  
B. Khadambari ◽  
S. S. Bhattacharya

Solar has become one of the fastest growing renewable energy sources. With the push towards sustainability it is an excellent solution to resolve the issue of our diminishing finite resources. Alternative photovoltaic systems are of much importance to utilize solar energy efficiently. The Cu-chalcopyrite compounds CuInS2 and CuInSe2 and their alloys provide absorber material of high absorption coefficients of the order of 105 cm-1. Cu2ZnSnS4 (CZTS) is more promising material for photovoltaic applications as Zn and Sn are abundant materials of earth’s crust. Further, the preparation of CZTS-ink facilitates the production of flexible solar cells. The device can be designed with Al doped ZnO as the front contact, n-type window layer (e.g. intrinsic ZnO); an n-type thin film buffer layer (e.g. CdS) and a p-type CZTS absorber layer with Molybdenum (Mo) substrate as back contact. In this study, CZTS films were synthesized by a non-vaccum solvent based process technique from a molecular-ink using a non toxic eco-friendly solvent dimethyl sulfoxide (DMSO). The deposited CZTS films were optimized and characterized by XRD, UV-visible spectroscopy and SEM.


Sign in / Sign up

Export Citation Format

Share Document