scholarly journals Tool Posture Determination for 5-Axis Control Machining by Area Division Method

2006 ◽  
Vol 49 (1) ◽  
pp. 35-42 ◽  
Author(s):  
Takeshi UMEHARA ◽  
Koji TERAMOTO ◽  
Tohru ISHIDA ◽  
Yoshimi TAKEUCHI
Keyword(s):  
Tool Posture

Analysis of the effect of tool posture on stability considering the nonlinear dynamic cutting force coefficient

2021 ◽  
pp. 1-19
Author(s):  
Zepeng Li ◽  
Rong Yan ◽  
Xiaowei Tang ◽  
Fang Yu Peng ◽  
Shihao Xin ◽  
...  
Keyword(s):  
Cutting Force ◽  
Nonlinear Dynamic ◽  
Chip Thickness ◽  
Cutting Depth ◽  
Force Coefficient ◽  
Critical Cutting Depth ◽  
Dynamic Cutting Force ◽  
Cutting Force Coefficient ◽  
Tool Posture ◽  
Instantaneous Uncut Chip Thickness

Abstract In aviation and navigation, complicated parts are milled with high-speed low-feed-per-tooth milling to decrease tool vibration for high quality. Because the nonlinearity of the cutting force coefficient (CFC) is more evident with the relatively smaller instantaneous uncut chip thickness, the stable critical cutting depth and its distribution against different tool postures are affected. Considering the nonlinearity, a nonlinear dynamic CFC model that reveals the effect of the dynamic instantaneous uncut chip thickness on the dynamic cutting force is derived based on the Taylor expansion. A five-axis bull-nose end milling dynamics model is established with the nonlinear dynamic CFC model. The stable critical cutting depth distribution with respect to tool posture is analyzed. The stability results predicted with the dynamic CFC model are compared with those from the static CFC model and the constant CFC model. The effects of tool posture and feed per tooth on stable critical cutting depth were also analyzed, and the proposed model was validated by cutting experiments. The maximal stable critical cutting depths that can be achieved under different tool postures by feed per tooth adjustment were calculated, and corresponding distribution diagrams are proposed for milling parameter optimization.

Development of Embedded Linux CNC System Based on ARM9

2011 ◽  
Vol 467-469 ◽  
pp. 906-911 ◽  
Author(s):  
Shu Kun Cao ◽  
Chang Lei Wang ◽  
Hui Zhang ◽  
Jie Lv ◽  
Chang Zhong Wu
Keyword(s):  
Tool Path ◽  
Free Form ◽  
Cnc System ◽  
Open Cnc ◽  
Standard Interface ◽  
Stepper Motors ◽  
Tool Posture ◽  
Cross Platform ◽  
Five Axis ◽  
The Way

Five-axis machining area of free surface is proposed by based on ARM9 and Linux open CNC system's overall structure of the CNC system hardware and software architecture. The system adopts the mode of the host computer PC, the lower computer ARM9 development board. PC completes the model of space surface and generates tool path by Simultaneous Multi-objective Optimization Algorithm on Free-form Surface Five-Axis Machining Tool Path and Tool Posture. The lower computer applies MYSQL database to storage and manage cutter location point information. Other modules access the database through ODBC standard interface. ARM9and PC utilize the way of cross-platform socket data transmission, the stepper motors is controlled by the way of constant acceleration - deceleration.

Tool Posture Planning Method for Low Rigidity Workpiece Considering Elastic Deformation Caused by Cutting Force

2020 ◽  
Author(s):  
Jun'ichi Kaneko ◽  
Yuki Okuma ◽  
Shumpei Sugita ◽  
Takeyuki Abe
Keyword(s):  
Cutting Force ◽  
Elastic Deformation ◽  
Feed Rate ◽  
Machining Process ◽  
Machining Time ◽  
Machined Surface ◽  
Nc Program ◽  
Blade Shape ◽  
Tool Posture ◽  
The Moment

Abstract In machining process for a workpiece with low rigidity such as a blade shape, it is required to consider elastic deformation of the workpiece shape itself due to cutting force. Conventionally, reduction of the cutting force in machining process is achieved by optimization of feed rate value in NC program. On the other hand, since a decrease in the feed rate causes an increase in machining time. So, other optimization algorithm is required. In this paper, a new method to suppress the elastic deformation of the workpiece by changing tool posture in multi-axis controlled machining is proposed. The proposed method is intended for finish machining process for blade shape with a ball end mill. In the proposed method, first, the cutting force loaded on the workpiece surface in a certain posture candidate is predicted, and an instantaneous cutting force at the moment when the machining surface is generated is estimated by model-based computer simulation. Based on this results, the amount of elastic deformation on the machined surface is estimated by FEM. This process is repeated at each cutter location and tool posture candidate, and the new tool posture that can minimize machining error caused by the elastic deformation is determined at each cutter location.

Development of Tool Path Generation Method for Complex Deep Groove Shape With Simultaneous 4-Axis Machining

2020 ◽  
Author(s):  
Kohei Ichikawa ◽  
Takayuki Nakamura ◽  
Jun'ichi Kaneko ◽  
Masanobu Hasegawa ◽  
Takeyuki Abe
Keyword(s):  
Tool Path ◽  
Complex Surface ◽  
Process Efficiency ◽  
Rotational Axis ◽  
Feed Speed ◽  
Groove Shape ◽  
Deep Groove ◽  
Complex Shapes ◽  
Tool Posture ◽  
Improved Performance

Abstract In recent years, aero engine parts with complex shapes are increasing due to demand on improved performance and weight reduction. In one example, some of those parts have groove which are deep, narrow and complex surface. They are processed by Simultaneous 5-axis machining with small ball end-mill. However, its complex groove shape cause greatly move of tool posture, thereby it cause greatly and discontinuous move of rotational and tilting axis of machine tool. As a result, actual feed speed cannot follow the commanded feed speed, so low process efficiency is problem. It can be considered simultaneous 4-axis machining which with fixed tilting axis as countermeasure. However it is difficult to generating tool path of simultaneous 4-axis machining by commercial Computer Aided Manufacturing (CAM) software for these deep groove shapes because of its tool collision avoidance algorithm. In this study, we developed method of generating tool path that can be machining simultaneous 4-axis machining while avoiding collision of workpiece and tool as an aim of increasing process efficiency. Furthermore, In order to effect of further improve the feed speed, we studied about posture planning way with possible to continuous moving of rotational axis, and we conducted verification test of increasing of feed speed with proposed method.

Workpiece Fixture Planning Method for Continuous Multi-Axis Machining with Consideration of Motion on Translational Axis

2012 ◽  
Vol 6 (6) ◽  
pp. 775-780 ◽  
Author(s):  
Jun’ichi Kaneko ◽  
◽  
Kenichiro Horio
Keyword(s):  
Machine Tool ◽  
Maximum Velocity ◽  
Planning Method ◽  
Second Step ◽  
Prototype System ◽  
Machining Time ◽  
Post Process ◽  
Fixture Planning ◽  
Tool Posture ◽  
Short Time

This study deals with a new method to plan fixture conditions of a workpiece on a trunnion table in a continuous multi-axis-controlled machine tool. The motion of the translational axes on the machine tool is usually greatly affected by machine tool structure, tool posture change, and the fixture conditions of the workpiece. However, in a conventional CAM scheme, the fixture conditions are designed to be determined separately. Furthermore, a method of planning these conditions to reduce total machining time has not been proposed. Therefore, this paper proposes a new planning method for workpiece position and posture on a trunnion table. The proposed method consists of two different steps. In the first step, a large number of fixture condition candidates are assumed automatically. In the second step, geometric calculations are executed to estimate the distribution of features in terms of motion on the translation axes. The second step is equivalent to the repetition of coordinate transformations in the conventional post process software. In the developed prototype system, parallel processing technology known as GPGPU is introduced to drastically reduce calculation time. The developed system can visualize differences in total travel distance, maximum velocity, and total machining time for each candidate. These results can assist a CAM operator in selecting the optimal fixture conditions in a short time.

scholarly journals A GPU-Accelerated Approach for Collision Detection and Tool Posture Modification in Multi-Axis Machining

IEEE Access ◽  
2018 ◽  
Vol 6 ◽  
pp. 35132-35142 ◽  
Author(s):  
Jing Wang ◽  
Ming Luo ◽  
Dinghua Zhang
Keyword(s):  
Collision Detection ◽  
Tool Posture
Sign in / Sign up

Export Citation Format

Share Document