K-1720 The Microscopic Interface Behavior at the Time of the Vapor Film Collapse on the High Temperature Particle Surface

2001 ◽  
Vol II.01.1 (0) ◽  
pp. 351-352
2000 ◽  
Vol 2000 (0) ◽  
pp. 183-184
Author(s):  
Yutaka ABE ◽  
Hiroshi YANAGIDA ◽  
Hideki NARIAI ◽  
Miki YAGITA

Author(s):  
Yutaka Abe ◽  
Hideki Nariai

During severe accident of a light water reactor, various thermal hydraulic phenomena including vapor explosion could threaten the integrity of the containment vessel. Thermal detonation model is proposed to describe the vapor explosion. According to the model, several processes should be sequentially satisfied for the trigger phenomena of the vapor explosion. One of the most important processes for the trigger phenomena is the vapor film collapse around high temperature molten material droplets. In the present study, the vapor film collapse behavior around high temperature solid particle submerged into water was experimentally investigated by attacking a pressure pulse to the vapor film on a high temperature sold particle. The interfacial phenomena between vapor and water were measure by using a high-speed video camera of the maximum speed of 40,500 fps. The visual data obtained were processed with visual data processing techniques. That is, the average vapor film thickness was estimated, dynamic behaviors of the interfaces were analyzed with PIV technique and the interface movement was estimated with the digital auto correlation techniques from the visual data obtained. Furthermore, the transients of the temperature and pressure were simultaneously measured. The interfacial temperatures between vapor and water, and between molted liquid and water are analytically estimated by solving the heat conduction equation with the data obtained as the boundary conditions. It is clarified that vapor collapse by pressure pulse occurs homogeneously around the vapor film surface on a high temperature particle. Microscopic information are obtained from the visual data by using visual data processing technique, PIV technique and digital auto-correlation technique. At the time the vapor film surface changes to white, the saturation temperature exceeds the interfacial temperature. The microscopic vapor film collapse behavior indicates the possibility of the phase change at the vapor film collapse.


Energies ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 2276
Author(s):  
Zhao Chen ◽  
Lin Jiang ◽  
Mofan Qiu ◽  
Meng Chen ◽  
Rongzheng Liu ◽  
...  

Particle adhesion is of great importance to coating processes due to its effect on fluidization. Currently, Computational Fluid Dynamics-Discrete Element Method (CFD-DEM) has become a powerful tool for the study of multiphase flows. Various contact force models have also been proposed. However, particle dynamics in high temperature will be changed with particle surface properties changing. In view of this, an adhesion model is developed based on approaching-loading-unloading-detaching idea and particle surface change under high temperature in this paper. Analyses of the adhesion model are given through two particle collision process and validated by experiment. Effects of inlet gas velocity and adhesion intensity on spouted bed dynamics are investigated. It is concluded that fluidization cycle will be accelerated by adhesion, and intensity of fluidization will be marginally enhanced by slight adhesion. Within a certain range, increasing inlet gas velocity will lead to strong intensity of particle motion. A parameter sensitivity comparison of linear spring-damping model and Hertz-Mindlin Model is given, which shows in case of small overlaps, forces calculated by both models have little distinction, diametrically opposed to that of large overlaps.


2020 ◽  
Vol 10 (2) ◽  
pp. 272-277 ◽  
Author(s):  
Bo Li ◽  
Xuwei Zhu ◽  
Xingjun Zhang ◽  
Xiaolong Yang ◽  
Xiuli Su

Crumb rubber pretreatment by microwave before blending with an asphalt matrix can address and improve the modification problem of of crumb rubber modifier (CRM) asphalt plant. In this research, the surface area and microstructure of microwave activated CRM and high-temperature performance of CRM asphalt were investigated to characterize the mechanism of interaction between activated CRM blends added and base asphalt. The surface area and microstructure of CRM were measured by gas adsorption method and the scanning electron microscopy (SEM) respectively when CRM was activated using microwave treatment time (30 s, 60 s, 90 s, 120 s and 150 s). The complex shear modulus (G*) and the phase angle (δ) of the CRM asphalt were measured by Dynamic Shear Rheometer (DSR) test. The results indicated that microwave treatment produced more porous structure and agglomeration phenomenon than control one for a given activated time of CRM. The flocculent structure was the most obvious one and agglomeration phenomenon was the most significant one for the particle surface microwave activated 90 s. The δ decreased and G* increased as CRM blends activated time increased before a certain time using the same frequency of microwave treatment. The G*/sinδ of CRM blends was the maximum when CRM activated for 90 s using microwave treatment. Both surface area and microstructure of the CRM influenced the high-temperature performance of CRM binders.


Sign in / Sign up

Export Citation Format

Share Document