561 Material flow behavior and weld temperature on spot welding between aluminum alloy and low carbon steel by friction stirring

2010 ◽  
Vol 2010.59 (0) ◽  
pp. 323-324
Author(s):  
Keitaro MIYAGAWA ◽  
Katashi MIYAGAWA ◽  
Toshiaki YASUI ◽  
Masahiro FUKUMOTO
Keyword(s):  
Aluminum Alloy ◽  
Carbon Steel ◽  
Material Flow ◽  
Spot Welding ◽  
Flow Behavior ◽  
Low Carbon Steel ◽  
Low Carbon

scholarly journals Resistance spot welding of dissimilar alloys 1008 low carbon steel5052 aluminum alloy

2018 ◽  
Vol 8 (02) ◽  
Author(s):  
Mohammad Jameel Zedan ◽  
Qasim M. Doos
Keyword(s):  
Aluminum Alloy ◽  
Carbon Steel ◽  
Resistance Spot Welding ◽  
Spot Welding ◽  
Low Carbon Steel ◽  
Welding Current ◽  
Intermetallic Compound Layer ◽  
Low Carbon ◽  
Resistance Spot ◽  
Dissimilar Alloys

The resistance spot welding is adopted to joint dissimilar alloys such as aluminum alloy 5052, and low carbon steel alloy 1008. In this work, the electrodes force 2100-2700 N, the welding current 7.5-10.5 KA, and welding time 10-20 cycle have been used. The relationships between the three parameters have been studied. The maximum tensile shear load of the aluminum alloy 5052-low carbon steel 1008 joint has been found equal to 2860 N for weld nugget diameter of 9 mm. The intermetallic compound layer (IMC) with 2-8 μm thickness with tongue-like has been appeared adjacent to the 1008 low carbon steel side, whereas a needle-shaped IMC layer adjacent to the aluminum alloy 5052 side

Resistance Spot Welding between Aluminum Alloy and Low-Carbon Steel

2011 ◽  
Vol 189-193 ◽  
pp. 3534-3540 ◽  
Author(s):  
Ran Feng Qiu ◽  
Hua Yu ◽  
Hong Xin Shi ◽  
Ke Ke Zhang ◽  
Chihiro Iwamoto ◽  
...  
Keyword(s):  
Aluminum Alloy ◽  
Carbon Steel ◽  
Reaction Layer ◽  
Resistance Spot Welding ◽  
Spot Welding ◽  
Low Carbon Steel ◽  
Interfacial Microstructure ◽  
Cover Plate ◽  
Low Carbon ◽  
Resistance Spot

Aluminum alloy A5052 and low-carbon steel (SPCC) was welded using resistance spot welding with a cover plate. The interfacial microstructure was observed using electron microscopy. A thick two-layered reaction layer contains Fe2Al5 and FeAl3was observed at the welding interface, respectively. Mechanical property analysis suggested that the reaction layer has no effect on the tensile shear strength of the A5052/SPCC joint and affects the cross tension strength of the joint.

scholarly journals Spot Welding between Aluminum Alloy and Low Carbon Steel by Friction Stirring

2008 ◽  
Vol 26 (1) ◽  
pp. 42-47 ◽  
Author(s):  
Katashi MIYAGAWA ◽  
Masami TSUBAKI ◽  
Toshiaki YASUI ◽  
Masahiro FUKUMOTO
Keyword(s):  
Aluminum Alloy ◽  
Carbon Steel ◽  
Spot Welding ◽  
Low Carbon Steel ◽  
Low Carbon

WEIRKOTE PLUS

Alloy Digest ◽  
1987 ◽  
Vol 36 (6) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Aluminum Alloy ◽  
Carbon Steel ◽  
Physical Properties ◽  
Deep Drawing ◽  
Sheet Steel ◽  
Low Carbon Steel ◽  
Low Carbon ◽  
Steel Corp ◽  
Coated Sheet

Abstract WEIRKOTE PLUS is a Galfan-coated sheet steel. The sheet is conventional low-carbon steel normally used for galvanized sheets and strip. This digest will concentrate on the characteristics and properties of the Galfan coating which is nominally a 95% zinc-5% aluminum alloy. The coating on Weirkote Plus is ideal for a variety of tough applications. It is excellent for products that require deep drawing and it combines extra corrosion resistance with superior formability. This datasheet provides information on composition and physical properties. It also includes information on corrosion resistance as well as forming, joining, and surface treatment. Filing Code: Zn-41. Producer or source: Weirton Steel Corp.

Sign in / Sign up

Export Citation Format

Share Document