scholarly journals Phenomenological Multiaxial Constitutive Model for Shape Memory Alloys and Its Application. 2nd Report, Micromechanical Analysis for Hysteretic Behavior of TiNi-SMA Embedded Unidirectional Composite Laminae.

1998 ◽  
Vol 64 (620) ◽  
pp. 1096-1103 ◽  
Author(s):  
Masamichi KAWAI ◽  
Hisao OGAWA ◽  
Vijayan BABURAJ ◽  
Tatsuzo KOGA
Keyword(s):  
Constitutive Model ◽  
Shape Memory Alloys ◽  
Shape Memory ◽  
Unidirectional Composite ◽  
Hysteretic Behavior ◽  
Micromechanical Analysis

A Macromechanical Constitutive Model of Shape Memory Alloys Under Uniaxial Cyclic Loading

2012 ◽  
Vol 28 (3) ◽  
pp. 469-477 ◽  
Author(s):  
H. Lei ◽  
B. Zhou ◽  
Z. Wang ◽  
Y. Wang
Keyword(s):  
Cyclic Loading ◽  
Constitutive Model ◽  
Shape Memory Alloys ◽  
Mechanical Behavior ◽  
Shape Memory ◽  
Hysteretic Behavior ◽  
Test Results ◽  
Model Match ◽  
Number Of Cycles ◽  
The Relationship

AbstractIn this paper, the thermomechanical behavior of shape memory alloys (SMAs) subjected to uniaxial cyclic loading is investigated. To obtain experimental data, the strain-controlled cyclic loading-unloading tests are conducted at various strain-rates and temperatures. Dislocations slip and deformation twins are considered to be the main reason that causes the unique cyclic mechanical behavior of SMAs. A new variable of shape memory residual factor was introduced, which will tend to zero with the increasing of the number of cycles. Exponential form equations are established to describe the evolution of shape memory residual factor, elastic modulus and critical stress, in which the influence of strain-rate, number of cycles and temperature are taken into account. The relationship between critical stresses and temperature is modified by considering the cycling effect. A macromechanical constitutive model was constructed to predict the cyclic mechanical behavior at constant temperature. Based on the material parameters obtained from test results, the hysteretic behavior of SMAs subjected to isothermal uniaxial cyclic loading is simulated. It is shown that the numerical results of the modified model match well with the test results.

A uniaxial constitutive model for NiTi shape memory alloy bars considering the effect of residual strain

2019 ◽  
Vol 30 (8) ◽  
pp. 1163-1177
Author(s):  
Canjun Li ◽  
Zhen Zhou ◽  
Yazhi Zhu
Keyword(s):  
Shape Memory Alloy ◽  
Constitutive Model ◽  
Shape Memory Alloys ◽  
Shape Memory ◽  
Residual Strain ◽  
Hysteretic Behavior ◽  
Niti Shape Memory Alloy ◽  
Strain Effect ◽  
Proposed Model ◽  
Residual Strains

Super-elastic shape memory alloys are widely used in structural engineering fields due to their encouraging super-elasticity and energy dissipation capability. Large-size shape memory alloy bars often present significant residual strains after unloading, which emphasizes the necessity of developing a residual strain effect–coupled constitutive model to predict well the performance of shape memory alloy–based structures. First, this article experimentally studies the hysteretic behavior of NiTi shape memory alloy bars under quasi-static loading conditions and investigates the effects of cyclic numbers and strain amplitudes on residual strain. Second, a concept of cumulative transformation strain is preliminarily introduced into a phenomenological Lagoudas model. A uniaxial constitutive model for shape memory alloy bars including the residual strain is proposed. By using OpenSees platform, numerical simulations of shape memory alloy bars are conducted—the results of which indicate that the proposed model can accurately capture the hysteretic behavior of shape memory alloys. The predicted residual strains show a good agreement to experimental results, which demonstrates the desirable efficiency of the proposed model.

Modeling of Internal Damage Evolution During Actuation Fatigue in Shape Memory Alloys

2018 ◽  
Author(s):  
Francis R. Phillips ◽  
Daniel Martin ◽  
Dimitris C. Lagoudas ◽  
Robert W. Wheeler
Keyword(s):  
Phase Transformation ◽  
Constitutive Model ◽  
Shape Memory Alloys ◽  
Shape Memory ◽  
Damage Evolution ◽  
Low Cycle Fatigue ◽  
Cycle Fatigue ◽  
Internal Damage ◽  
Functional Fatigue ◽  
Non Linear

Shape memory alloys (SMAs) are unique materials capable of undergoing a thermo-mechanically induced, reversible, crystallographic phase transformation. As SMAs are utilized across a variety of applications, it is necessary to understand the internal changes that occur throughout the lifetime of SMA components. One of the key limitations to the lifetime of a SMA component is the response of SMAs to fatigue. SMAs are subject to two kinds of fatigue, namely structural fatigue due to cyclic mechanical loading which is similar to high cycle fatigue, and functional fatigue due to cyclic phase transformation which typical is limited to the low cycle fatigue regime. In cases where functional fatigue is due to thermally induced phase transformation in contrast to being mechanically induced, this form of fatigue can be further defined as actuation fatigue. Utilizing X-ray computed microtomography, it is shown that during actuation fatigue, internal damage such as cracks or voids, evolves in a non-linear manner. A function is generated to capture this non-linear internal damage evolution and introduced into a SMA constitutive model. Finally, it is shown how the modified SMA constitutive model responds and the ability of the model to predict actuation fatigue lifetime is demonstrated.

Systems Actuated by Shape Memory Alloys: Identification and Modeling

2021 ◽  
Vol 1 (2) ◽  
pp. 12-20
Author(s):  
Najmeh Keshtkar ◽  
Johannes Mersch ◽  
Konrad Katzer ◽  
Felix Lohse ◽  
Lars Natkowski ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Mathematical Model ◽  
Constitutive Model ◽  
Shape Memory Alloys ◽  
Numerical Simulations ◽  
Shape Memory ◽  
Transfer Equation ◽  
Mechanical Parameters ◽  
Heat Transfer Equation ◽  
The Mathematical Model

This paper presents the identification of thermal and mechanical parameters of shape memory alloys by using the heat transfer equation and a constitutive model. The identified parameters are then used to describe the mathematical model of a fiber-elastomer composite embedded with shape memory alloys. To verify the validity of the obtained equations, numerical simulations of the SMA temperature and composite bending are carried out and compared with the experimental results.

Adaptive Elastic SMA Elements for Damping Applications

2013 ◽  
Author(s):  
Alexander Czechowicz ◽  
Peter Dültgen ◽  
Sven Langbein
Keyword(s):  
Boundary Conditions ◽  
Shape Memory Alloys ◽  
Shape Memory ◽  
Smart Materials ◽  
Electrical Resistance ◽  
Thermal Activation ◽  
Hysteretic Behavior ◽  
Damping Function ◽  
Actual Shape ◽  
Elastic Elements

Shape memory alloys (SMA) are smart materials, which have two technical usable effects: While pseudoplastic SMA have the ability to change into a previously imprinted actual shape through the means of thermal activation, pseudoelastic SMA show a reversible mechanical elongation up to 8% at constant temperature. The transformation between the two possible material phases (austenite and martensite) shows a hysteretic behavior. As a result of these properties, SMA can be used as elastic elements with intrinsic damping function. Additionally the electrical resistance changes remarkably during the material deformation. These effects are presented in the publication in combination with potential for applications in different branches at varying boundary conditions. The focus of the presented research is concentrated on the application of elastic elements with adaptive damping function. As a proof for the potential considerations, an application example sums up this presentation.

Sign in / Sign up

Export Citation Format

Share Document