scholarly journals Negative nonlinear refraction obtained with ultrashort laser pulses

2007 ◽  
Vol 15 (11) ◽  
pp. 7006 ◽  
Author(s):  
Chen-Wei Chen ◽  
Jaw-Luen Tang ◽  
Kuo-Hsiang Chung ◽  
Tai-Huei Wei ◽  
Tzer-Hsiang Huang
Nanomaterials ◽  
2021 ◽  
Vol 11 (12) ◽  
pp. 3351
Author(s):  
Arturs Bundulis ◽  
Ivan A. Shuklov ◽  
Vyacheslav V. Kim ◽  
Alaa A. Mardini ◽  
Jurgis Grube ◽  
...  

We report measurements of the saturated intensities, saturable absorption, and nonlinear refraction in 70-nm thick films containing 4 nm HgTe quantum dots. We demonstrate strong nonlinear refraction and saturable absorption in the thin films using tunable picosecond and femtosecond pulses. Studies were carried out using tunable laser pulses in the range of 400–1100 nm. A significant variation of the nonlinear refraction along this spectral range was demonstrated. The maximal values of the nonlinear absorption coefficients and nonlinear refractive indices determined within the studied wavelength range were −2.4 × 10−5 cm2 W−1 (in the case of 28 ps, 700 nm probe pulses) and −3 × 10−9 cm2 W−1 (in the case of 28 ps, 400 nm probe pulses), respectively. Our studies show that HgTe quantum dots can be used in different fields e.g., as efficient emitters of high-order harmonics of ultrashort laser pulses or as laser mode-lockers.


Author(s):  
Isamu Miyamoto ◽  
Kristian Cvecek ◽  
Yasuhiro Okamoto ◽  
Michael Schmidt ◽  
Henry Helvajian

Author(s):  
Marcelo Bertolete Carneiro ◽  
Patrícia Alves Barbosa ◽  
Ricardo Samad ◽  
NIlson Vieira ◽  
Wagner de Rossi ◽  
...  

Author(s):  
V. Pouget ◽  
E. Faraud ◽  
K. Shao ◽  
S. Jonathas ◽  
D. Horain ◽  
...  

Abstract This paper presents the use of pulsed laser stimulation with picosecond and femtosecond laser pulses. We first discuss the resolution improvement that can be expected when using ultrashort laser pulses. Two case studies are then presented to illustrate the possibilities of the pulsed laser photoelectric stimulation in picosecond single-photon and femtosecond two-photon modes.


2021 ◽  
Vol 11 (2) ◽  
Author(s):  
Pengjie Wang ◽  
Zheng Gong ◽  
Seong Geun Lee ◽  
Yinren Shou ◽  
Yixing Geng ◽  
...  

2021 ◽  
Vol 127 (5) ◽  
Author(s):  
Daniel Holder ◽  
Rudolf Weber ◽  
Thomas Graf ◽  
Volkher Onuseit ◽  
David Brinkmeier ◽  
...  

AbstractA simplified analytical model is presented that predicts the depth progress during and the final hole depth obtained by laser percussion drilling in metals with ultrashort laser pulses. The model is based on the assumption that drilled microholes exhibit a conical shape and that the absorbed fluence linearly increases with the depth of the hole. The depth progress is calculated recursively based on the depth changes induced by the successive pulses. The experimental validation confirms the model and its assumptions for percussion drilling in stainless steel with picosecond pulses and different pulse energies.


2021 ◽  
Vol 127 (9) ◽  
Author(s):  
A. Feuer ◽  
R. Weber ◽  
R. Feuer ◽  
D. Brinkmeier ◽  
T. Graf

AbstractThe influence of the laser fluence on the quality of percussion-drilled holes was investigated both experimentally and by an analytical model. The study reveals that the edge quality of the drilled microholes depends on the laser fluence reaching the rear exit of the hole and changes with the number of pulses applied after breakthrough. The minimum fluence that must reach the hole’s exit in order to obtain high-quality microholes in stainless steel was experimentally found to be 2.8 times the ablation threshold.


Sign in / Sign up

Export Citation Format

Share Document