4. Application protocols for IoT

2020 ◽  
pp. 85-100
2013 ◽  
Vol 61 (S 02) ◽  
Author(s):  
H Prießmann ◽  
M Glöckler ◽  
J Halbfass ◽  
AM Koch ◽  
S Dittrich ◽  
...  

Author(s):  
Evelyn Guadalupe Torres-Capetillo ◽  
Guadalupe Rosalía Capetillo-Hernández ◽  
Laura Roesch-Ramos ◽  
Flora Moreno-Marín

The use of orthodontic treatments in patients with temporary prostheses has been increasing, the purpose of this in vitro research is to measure the adhesive bond strength between orthodontic resin and acrylic surfaces by applying different procedures. Objective. To compare the adhesive bonding strength between orthodontic resin and acrylic surfaces under different application protocols. Methodology. Transversal, experimental, prospective study. In vitro with acrylic provisions, was carried out in the laboratory of the Faculty of Dentistry of the Universidad Veracruzana region of Veracruz. In the period of February-June of the year 2019. The sample was conformed by two control groups of specimens and four experimental ones, each group conformed by 20 specimens, in total 120 provisional ones were made in acrylic Nic Tone of quick self-cure. The tests performed by the ULTRATESTER machine were expressed in MPa. Later, the data obtained were processed in Excel tables (version) for statistical processing in SPSS version 24. Contribution. When comparing the pre-cutting protocol of acrylic surfaces with fine diamond bur and the protocol without pre-cutting, no statistically significant differences were found, therefore, this step could be omitted in clinical practice.


2019 ◽  
Vol 19 (1) ◽  
Author(s):  
Andreia Assis Carvalho ◽  
Murillo Martins Leite ◽  
Jessica Karla Maia Zago ◽  
Carla Aparecida Bernardes Costa Men Nunes ◽  
Terezinha de Jesus Esteves Barata ◽  
...  

Abstract Background Multimode adhesives incorporate the versatility of adapting to various clinical situations by its capacity to be used in different protocols. This study aimed to evaluate the clinical behavior of composite resin direct restorations (Class I and II) performed with different universal dentin adhesive application protocols comparing adapted FDI and adapted USPHS criteria. Methods The current study is a randomized, double-blind, split-mouth, and convenience sample controlled clinical trial. The participants (age ≥ 18 years) had restorative need of Class I and/or II due to the presence of carious lesions and/or unsatisfactory restorations in at least three dental elements. Each participant received three application protocols for Scotchbond Universal adhesive (3M ESPE), one in each tooth to be restored: ER = etch-and-rinse + adhesive (n = 50); SEE = selective enamel etch + adhesive (n = 50) and SE = self-etch adhesive (n = 50). All teeth were restored in a similar way using Filtek™ Supreme composite resin (3M ESPE). Restorations were evaluated using the adapted FDI and adapted USPHS criteria, at baseline after 7 to 21 (12.02 ± 5.68) days (T1; n = 50 per group) and after 12 to 20 (15.8 ± 2.7) months (T2; n = 46 per group) by two previously calibrated evaluators (Kappa > 0.80). The statistical tests were performed between groups (Friedman), intragroup (Wilcoxon), and between the criteria considering acceptable and not acceptable restorations (McNemar), α = 0.05. Results A statistically significant difference was observed only for the property “superficial staining”, between groups at T2 (p = 0.01) for ER (n = 13 with score 2 or more) and SEE (n = 3 with score 2 or more) and intragroup for ER (T1, n = 1 with score 2 or more; T2, n = 13 with score 2 or more, p = 0.001) and SE (T1, n = 0 with score 2 or more; T2, n = 8 with score 2 or more p = 0.007). For the other comparisons between groups, intragroup, and between the adapted FDI and adapted USPHS criteria, there were no statistically significant differences (p ≥ 0.05). Conclusions It can be concluded that the different application protocols of the universal adhesive resulted in clinically “acceptable” restorations after 15.8 ± 2.7 months of follow-up. Adapted FDI and adapted USPHS criteria provided similar results to each other. Trial registration. Number in Brazilian Registry of Clinical Trials (ReBEC): RBR-9p3hdp. Registered 24 May 2015.


2019 ◽  
Vol 38 (1) ◽  
pp. 61-67 ◽  
Author(s):  
Marcia Regina Cabral OLIVEIRA ◽  
Pedro Henrique Cabral OLIVEIRA ◽  
Luiz Henrique Cabral OLIVEIRA ◽  
Anna Carolina Ratto Tempestini HORLIANA ◽  
Paulo Francisco CÉSAR ◽  
...  

1994 ◽  
Vol 10 (04) ◽  
pp. 281-296
Author(s):  
James T. Higney ◽  
Joanne J. Ouillette

Draft STEP (Standard for the Exchange of Product Model Data) application protocols, developed by the Navy Industry Digital Data Exchange Standards Committee (NIDDESC), have been issued to define the information content of a product model for a ship. The work reported in this paper combines the existing CAD models of the DDG51 Class design with a newly developed non-graphic database so that the overall information content complies with the STEP protocols. This work represents the first-time implementation of the application protocols and is a significant step in the Navy's plan to do the design of variants of the DDG51 Class totally in computer-aided design (CAD). The combined graphic/non-graphic database is referred to as the DDG51 engineering product model. Emphasis has been placed on populating the non-graphic database with the information necessary to perform all required engineering analyses. The basic schema described in this paper may be extended to support other areas of interest, such as logistics support.


Sign in / Sign up

Export Citation Format

Share Document