scholarly journals Recent Progress on Plasmon-Enhanced Fluorescence

Nanophotonics ◽  
2015 ◽  
Vol 4 (4) ◽  
pp. 472-490 ◽  
Author(s):  
Jun Dong ◽  
Zhenglong Zhang ◽  
Hairong Zheng ◽  
Mentao Sun

AbstractThe optically generated collective electron density waves on metal–dielectric boundaries known as surface plasmons have been of great scientific interest since their discovery. Being electromagnetic waves on gold or silver nanoparticle’s surface, localised surface plasmons (LSP) can strongly enhance the electromagnetic field. These strong electromagnetic fields near the metal surfaces have been used in various applications like surface enhanced spectroscopy (SES), plasmonic lithography, plasmonic trapping of particles, and plasmonic catalysis. Resonant coupling of LSPs to fluorophore can strongly enhance the emission intensity, the angular distribution, and the polarisation of the emitted radiation and even the speed of radiative decay, which is so-called plasmon enhanced fluorescence (PEF). As a result, more and more reports on surface-enhanced fluorescence have appeared, such as SPASER-s, plasmon assisted lasing, single molecule fluorescence measurements, surface plasmoncoupled emission (SPCE) in biological sensing, optical orbit designs etc. In this review, we focus on recent advanced reports on plasmon-enhanced fluorescence (PEF). First, the mechanism of PEF and early results of enhanced fluorescence observed by metal nanostructure will be introduced. Then, the enhanced substrates, including periodical and nonperiodical nanostructure, will be discussed and the most important factor of the spacer between molecule and surface and wavelength dependence on PEF is demonstrated. Finally, the recent progress of tipenhanced fluorescence and PEF from the rare-earth doped up-conversion (UC) and down-conversion (DC) nanoparticles (NPs) are also commented upon. This review provides an introduction to fundamentals of PEF, illustrates the current progress in the design of metallic nanostructures for efficient fluorescence signal amplification that utilises propagating and localised surface plasmons.

Nanophotonics ◽  
2017 ◽  
Vol 6 (2) ◽  
pp. 502 ◽  
Author(s):  
Jun Dong ◽  
Zhenglong Zhang ◽  
Hairong Zheng ◽  
Mengtao Sun

Nanomaterials ◽  
2020 ◽  
Vol 10 (4) ◽  
pp. 773 ◽  
Author(s):  
Martin Šubr ◽  
Petr Praus ◽  
Anna Kuzminova ◽  
Eva Kočišová ◽  
Ondřej Kylián ◽  
...  

Surface-enhanced fluorescence (SEF) requires the absorption/emission band of the fluorophore, the localized surface plasmon resonance (LSPR) of the nanostructure and the excitation wavelength to fall in the same (or very close) spectral range. In this paper, we monitor the SEF intensity and lifetime dependence of riboflavin (vitamin B2) adsorbed on a spacer-modified Ag substrate with respect to the thickness of the spacer. The substrates were formed by silver nanoislands deposited onto magnetron-sputtered polytetrafluoroethylene (ms-PTFE). The spacer was formed by the ms-PTFE layer with the thickness ranging from ~5 to 25 nm. The riboflavin dissolved in dimethylsulfoxide (DMSO) at a 10 µM concentration forms, at the ms-PTFE surface, a homogeneous layer of adsorbed molecules corresponding to a monomolecular layer. The microspectroscopic measurements of the adsorbed layer were performed through a sessile droplet; our study has shown the advantages and limitations of this approach. Time-resolved fluorescence enabled us to determine the enhanced fluorescence quantum yield due to the shortening of the radiative decay in the vicinity of the plasmonic surface. For the 5 nm ms-PTFE layer possessing the largest (estimated 4×) fluorescence enhancement, the quantum yield was increased 2.3×.


2020 ◽  
Vol 20 (5) ◽  
pp. 3195-3200 ◽  
Author(s):  
Jian Wu ◽  
Yongjun Du ◽  
Chunyan Wang ◽  
Tao Chen

Surface-enhanced fluorescence detection has large potential for detecting many chemical and biological trace analytes. This paper presents a novel method for preparing silver nanomaterials in microfluidic chip channels for the surface-enhanced fluorescence detection of fluorescent dye (SYBR Green I) molecules. Microfluidic chip channels were fabricated by a 248-nm excimer laser. Silver nanoparticles (Ag-NPs) were prepared inside the microfluidic chip channels by directly heating the silver precursor solution. The influence of different temperatures on the sizes of the silver nanoparticles was studied. Then, the surface-enhanced fluorescence technology based on the microfluidic system was used to detect the fluorescent dye molecules. As a result, the fluorescence signal of the fluorescent dye molecules was significantly enhanced by the silver nanoparticles. In addition, the effect of particle size on the fluorescence signal was studied. This simple and fast method is suitable for a fluorescent PCR (polymerase chain reaction) system and has good application prospects for detecting harmful microorganisms in a spacecraft.


The Analyst ◽  
2015 ◽  
Vol 140 (2) ◽  
pp. 476-482 ◽  
Author(s):  
D. Volpati ◽  
E. R. Spada ◽  
C. C. Plá Cid ◽  
M. L. Sartorelli ◽  
R. F. Aroca ◽  
...  

Towards reproducible and feasible large-area active substrates for the surface-enhanced phenomena, we report electrodeposited antidot copper nanostructures and employed them as active substrates for surface-enhanced fluorescence (SEF), which exhibit a relative great enhancement factor and reproducible signals.


2017 ◽  
Vol 46 (13) ◽  
pp. 3962-3979 ◽  
Author(s):  
Jian-Feng Li ◽  
Chao-Yu Li ◽  
Ricardo F. Aroca

Fluorescence spectroscopy with strong emitters is a remarkable tool with ultra-high sensitivity for detection and imaging down to the single-molecule level.


Sign in / Sign up

Export Citation Format

Share Document