scholarly journals High-efficiency and high-speed germanium photodetector enabled by multiresonant photonic crystal

Nanophotonics ◽  
2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Jinwen Song ◽  
Shuai Yuan ◽  
Chengcong Cui ◽  
Yuxi Wang ◽  
Zhiyong Li ◽  
...  

AbstractHigh-efficiency and high-speed photodetectors with broadband responses are playing pivotal roles for wavelength-division multiplexing optical communications. Germanium photodetectors on silicon platforms exhibit potential cost advantage due to the compatibility for monolithic integration with silicon-based electronic circuits for signal amplification and processing. In this article, we report a normal incidence, germanium photodetector enabled by guided-mode resonances in photonic crystal, which successfully resolved the compromise between quantum efficiency, wavelength coverage and bandwidth requirement, a drawback usually faced by conventional photodetectors operating at normal incidence. The resonant photonic crystal structure is designed to support multiple resonances in the target wavelength range. With an intrinsic absorption layer thickness of 350 nm, the device achieved a high external quantum efficiency of 50% at 1550 nm, along with an enhancement around 300% for the entire C-band. Using a mesa diameter of 14 μm, the fabricated device exhibited a 3-dB bandwidth of 33 GHz and obtained clear eye diagrams at bit rate up to 56 Gbps. This work provides a promising method to design high-efficiency, high-speed, normal incidence germanium photodetectors for optical interconnect systems.

Author(s):  
BHADRA ANAMIKA ◽  
SAHU VIKAS ◽  
SHRIVASTAVA SHARAD MOHAN ◽  
ANSHU ◽  
SANGHVI ANJALI S. ◽  
...  

2016 ◽  
Vol 25 (02) ◽  
pp. 1650023 ◽  
Author(s):  
Hassan Pakarzadeh ◽  
Mostafa Taghizadeh ◽  
Mohsen Hatami

A photonic crystal fiber (PCF) with a zero-dispersion wavelength (ZDW) in the telecommunication region is designed and an ultra-broadband fiber optical parametric amplifier (FOPA) based on such PCF is simulated. Results show that the PCF-based FOPA exhibits much higher gain with a very broad bandwidth (covering O- to U-band) in comparison with the highly nonlinear fiber (HNLF)-based FOPA. Also, the required fiber length and the input pump power are reduced for the PCF-based FOPA. The obtained results show the great potential of the PCF-based OPA for the telecommunication applications, e.g. amplification of wavelength-division multiplexing (WDM) signals.


2011 ◽  
Vol 418-420 ◽  
pp. 436-440
Author(s):  
Wichasirikul Amorntep ◽  
Pijitrojana Wanchai

Inhibited and enhanced spontaneous emission of light is essential to quantum optics in design and development of high efficiency optical devices which are useful to security optical communication system. Thus, we performed to develop an efficient single photon source by controlling inhibited or enhanced spontaneous emission of the photon using silicon-based honeycomb lattice patterned finite thickness photonic crystal waveguide. A quantum dot embedded in planar photonic crystal membrane waveguide is the light source. The honeycomb lattice of circular air holes on silicon plate is simulated to obtain large completely photonic band gaps. This significant property shows the potential applied guide modes of photonic crystal membrane for controlling inhibited or enhanced spontaneous emission between the quantum dots and the photonic crystal waveguide. Significantly, this work is oriented to produce the novel single photon sources which can emit one photon at a time for the quantum optical security network with single photon state. In addition to the honeycomb lattice can easily be made on a Si on insulator (SOI) wafer.


Author(s):  
S. Semmalar ◽  
S. Malarkkan

Proposed the EDFA and EYCDFA power booster (Erbium Doped Fiber Amplifier- Erbium ytterbium co doped fiber amplifier) with quad pumping for high speed and multi wavelength services in an optical communication. The proposed EDFA and EYCDFA power booster with WDM(Wavelength division multiplexing) simulated by dual forward and Backward pumping, Dual-backward pumping, Tri-single forward and dual backward pumping and Quadsingle forward and tri-backward pumping with respect to Pump power and fiber Length. The parameters Input Optical power, Output Optical power, Forward Signal power, Backward Signal power measured and determined the speed of transmission in all types of pumping methods. From that the proposed EDFA- ans EYCDFA power booster with WDM quad pumping is the best suitable for secured high speed optical telecommunication systems. The results shown in Quad pumping Output optical power is maximum 25.2dB and optimum spectral forward Signal power is 30.5dBm and very less spectral optical backward signal power of -25.4dBm with Length 5m


Sign in / Sign up

Export Citation Format

Share Document