Influence of Hydrogen Content on the α/β Phase Transformation Temperatures and on the Thermal-Mechanical Behavior of Zy-4, M4 (ZrSnFeV), and M5™ (ZrNbO) Alloys During the First Phase of LOCA Transient

2009 ◽  
pp. 673-673-29 ◽  
Author(s):  
J-C Brachet ◽  
L Portier ◽  
T Forgeron ◽  
J Hivroz ◽  
D Hamon ◽  
...  
Keyword(s):  
Phase Transformation ◽  
Mechanical Behavior ◽  
Hydrogen Content ◽  
Transformation Temperatures ◽  
Β Phase

Phase Transformation In Ti-6al-4v Alloys

1972 ◽  
Vol 30 ◽  
pp. 584-585
Author(s):  
Shiro Fujishiro
Keyword(s):  
Phase Transformation ◽  
Grain Boundary ◽  
Cryogenic Temperature ◽  
Β Phase ◽  
Heat Treated ◽  
Mixed Microstructure ◽  
Ductile Behavior

The Ti-6 wt.% Al-4 wt.% V commercial alloys have exhibited an improved formability at cryogenic temperature when the alloys were heat-treated prior to the tests. The author was interested in further investigating this unusual ductile behavior which may be associated with the strain-induced transformation or twinning of the a phase, enhanced at lower temperatures. The starting materials, supplied by RMI Co., Niles, Ohio were rolled mill products in the form of 40 mil sheets. The microstructure of the as-received materials contained mainly ellipsoidal α grains measuring between 1 and 5μ. The β phase formed an undefined grain boundary around the a grains. The specimens were homogenized at 1050°C for one hour, followed by aging at 500°C for two hours, and then quenched in water to produce the α/β mixed microstructure.

Microstructural and Microchemical Characterization of Nickel Sulfide Inclusions in Plate Glass

1991 ◽  
Vol 49 ◽  
pp. 962-963
Author(s):  
J. Cooper ◽  
O. Popoola ◽  
W. M. Kriven
Keyword(s):  
Thermal Expansion ◽  
Phase Transformation ◽  
Glass Matrix ◽  
Nickel Sulfide ◽  
Plate Glass ◽  
Thermal Expansion Mismatch ◽  
Volume Increase ◽  
Β Phase ◽  
Microchemical Characterization

Nickel sulfide inclusions have been implicated in the spontaneous fracture of large windows of tempered plate glass. Two alternative explanations for the fracture-initiating behaviour of these inclusions have been proposed: (1) the volume increase which accompanies the α to β phase transformation in stoichiometric NiS, and (2) the thermal expansion mismatch between the nickel sulfide phases and the glass matrix. The microstructure and microchemistry of the small inclusions (80 to 250 μm spheres), needed to determine the cause of fracture, have not been well characterized hitherto. The aim of this communication is to report a detailed TEM and EDS study of the inclusions.

γ→β phase transformation in Ti-42.9Al-4.6Nb–2Cr

2021 ◽  
Vol 133 ◽  
pp. 107169
Author(s):  
R.R. Xu ◽  
M.Q. Li
Keyword(s):  
Phase Transformation ◽  
Β Phase

The phase transformation and mechanical behavior of NiTi thin films

2004 ◽  
Author(s):  
Zhenyu Yuan ◽  
Xiulan Cheng ◽  
Dong Xu ◽  
Zhican Ye ◽  
YaFei Zhang ◽  
...  
Keyword(s):  
Thin Films ◽  
Phase Transformation ◽  
Mechanical Behavior

Orientation-dependent mechanical behavior and phase transformation of mono-crystalline silicon

2016 ◽  
Vol 119 (9) ◽  
pp. 095904 ◽  
Author(s):  
Jiapeng Sun ◽  
Aibin Ma ◽  
Jinghua Jiang ◽  
Jing Han ◽  
Ying Han
Keyword(s):  
Phase Transformation ◽  
Mechanical Behavior ◽  
Crystalline Silicon

scholarly journals Prediction and measurement of selected phase transformation temperatures of steels

2017 ◽  
Vol 53 (3) ◽  
pp. 391-398 ◽  
Author(s):  
O. Martiník ◽  
B. Smetana ◽  
J. Dobrovská ◽  
A. Kalup ◽  
S. Zlá ◽  
...  
Keyword(s):  
Thermal Analysis ◽  
Phase Transformation ◽  
Statistical Evaluation ◽  
Precise Determination ◽  
Experimental Measurements ◽  
Transformation Temperatures ◽  
Literature Research ◽  
Computational Thermodynamic ◽  
Peritectic Transition

The study deals with precise determination of phase transformation temperatures of steel. A series of experimental measurements were carried out by Differential Thermal Analysis (DTA) and Direct Thermal Analysis (TA) to obtain temperatures very close to the equilibrium temperatures. There are presented results from the high temperatures region, above 1000?C, with focus on the solidus temperatures (TS), peritectic transition (TP) and liquidus (TL) of multicomponent steels. The data obtained were verified by statistical evaluation and compared with computational thermodynamic and empirical calculations. The calculations were performed using 15 empirical equations obtained by literature research (10 for TL and 5 for TS), as well as by software InterDendritic Solidification (IDS) and Thermo-Calc (2015b, TCFE8; TC). It was verified that both thermo-analytical methods used are set correctly; the results are reproducible, comparable and close to equilibrium state.

Sign in / Sign up

Export Citation Format

Share Document