scholarly journals A Life Cycle Assessment on a Fuel Production Through Distributed Biomass Gasification Process

2008 ◽  
Vol 128 (2) ◽  
pp. 168-175 ◽  
Author(s):  
Kiyoshi Dowaki ◽  
Tsutomu Eguchi ◽  
Rui Ohkubo ◽  
Yutaka Genchi
Eng ◽  
2020 ◽  
Vol 1 (1) ◽  
pp. 2-30
Author(s):  
Ioannis Voultsos ◽  
Dimitrios Katsourinis ◽  
Dimitrios Giannopoulos ◽  
Maria Founti

The energetic and environmental performance of a cogeneration biomass gasification plant, situated in Thessaly, Greece is evaluated via a methodology combining process simulation and Life Cycle Assessment (LCA). Initially, the gasification process of the most common agricultural residues found in the Thessaly region is simulated to establish the effect of technical parameters such as gasification temperature, equivalence ratio and raw biomass moisture content. It is shown that a maximum gasification efficiency of approximately 70% can be reached for all feedstock types. Lower efficiency values are associated with increased raw biomass moisture content. Next, the gasifier model is up-scaled, achieving the operation of a 1 MWel and 2.25 MWth cogeneration plant. The Life Cycle Assessment of the operation of the cogeneration unit is conducted using as input the performance data from the process simulation. Global Warming Potential and the Cumulative Demand of Non-Renewable Fossil Energy results suggest that the component which had the major share in both impact categories is the self-consumption of electricity of the plant. Finally, the key conclusion of the present study is the quantification of carbon dioxide mitigation and non-renewable energy savings by comparing the biomass cogeneration unit operation with conventional reference cases.


Author(s):  
Noorie Rajvanshi ◽  
Herbert A. Ingley

This study represents a cumulative exergy and life cycle assessment of corn ethanol production via dry milling. The process under consideration includes the agricultural process for production of corn, transportation of corn and industrial process of ethanol production. The secondary process of production of pesticides and fertilizers is also taken into consideration. It is seen that the exergy content of ethanol produced from this process is 23.3 MJ per liter of ethanol produced. The non-renewable input was 7.5 MJ per liter. The overall production efficiency of the industrial process was found to be 49%. The life cycle assessment results showed that both the global warming potential and acidification potential are positive which means that the production of corn ethanol via dry milling contributes to the increase of greenhouse gases and acidification.


Sign in / Sign up

Export Citation Format

Share Document