Transmission electron microscopy study of (103)-oriented epitaxial SrBi2Nb2O9 films grown on (111) SrTiO3 and (111) SrRuO3/(111) SrTiO3

2001 ◽  
Vol 16 (2) ◽  
pp. 489-502 ◽  
Author(s):  
M. A. Zurbuchen ◽  
J. Lettieri ◽  
Y. Jia ◽  
D. G. Schlom ◽  
S. K. Streiffer ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Substrate Surface ◽  
Microscopy Study ◽  
Dark Field ◽  
Electron Microscopy Study ◽  
Cross Sectional ◽  
Plan View ◽  
Transmission Electron ◽  
Second Phases

Portions of the same epitaxial (103)-oriented SrBi2Nb2O9 film grown on (111) SrTiO3 for which we recently reported the highest remanent polarization (Pr) ever achieved in SrBi2Nb2O9 (or SrBi2Ta2O9) films, i.e., Pr = 15.7 μC/cm2, have been characterized microstructurally by plan-view and cross-sectional transmission electron microscopy (TEM) along three orthogonal viewing directions. SrBi2Nb2O9 grows with its c axis tilted 57° from the substrate surface normal in a three-fold twin structure about the substrate [111], with the growth twins' c axes nominally aligned with the three 〈100〉 SrTiO3 directions. (103) SrBi2Nb2O9 films with and without an underlying epitaxial SrRuO3 bottom electrode have been studied. Dark-field TEM imaging over a 12 μm2 area shows no evidence of second phases (crystalline or amorphous). A high density of out-of-phase boundaries exists in the films.

Transmission Electron Microscopy Study of Epitaxial Co/Au and Co/Pd (111) Multilayers

1992 ◽  
Vol 263 ◽  
Author(s):  
A.E.M. de Veirman ◽  
F. Hakkens ◽  
W. Coene ◽  
F.J.A. Den Broeder
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
High Resolution Electron Microscopy ◽  
Microscopy Study ◽  
Electron Microscopy Study ◽  
Interface Plane ◽  
Misfit Dislocations ◽  
Transmission Electron Microscopy Study ◽  
Cross Sectional ◽  
Transmission Electron

ABSTRACTThe results of a transmission electron microscopy study of Co/Au and Co/Pd multilayers are reported. Special emphasis is put on the epitaxial growth and the relaxation of the misfit strain of these high misfit systems. In bright-field cross-sectional images, periodic contrast fringes are observed at the interfaces, which are the result of Moiré interference and which allow determination of the degree of misfit relaxation at the interface. It was established that 80-85% of the misfit is relaxed. From high resolution electron microscopy images the Burgers vector of the misfit dislocations was derived, being a/2<110> lying in the (111) interface plane. The results obtained for the Co/Au and Co/Pd multilayers will be discussed in comparison with those obtained for a bilayer of Co and Au.

Transmission electron microscopy study of YNi2B2C thin film growth on MgO(001)

2004 ◽  
Vol 19 (5) ◽  
pp. 1413-1416 ◽  
Author(s):  
G.H. Cao ◽  
P. Simon ◽  
W. Skrotzki
Keyword(s):  
Thin Film ◽  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Film Growth ◽  
Microscopy Study ◽  
Electron Microscopy Study ◽  
Orientation Relationships ◽  
Cross Sectional ◽  
Transmission Electron ◽  
Mgo Substrate

A YNi2B2C thin film deposited on MgO(001) substrate by pulsed laser deposition has been investigated by transmission electron microscopy (TEM). Cross-sectional TEM analyses show that the YNi2B2C film grows in the [001] direction. Y2O3 exists not only as an interlayer at the interface of the YNi2B2C thin film and the MgO substrate but occasionally also in the YNi2B2C thin film near the substrate. The orientation relationships between the YNi2B2C thin film, Y2O3 interlayer, and MgO substrate are determined from electron-diffraction patterns to be MgO(001)[100] ‖ Y2O3(001)[100], YNi2B2C(001)[110] ‖ Y2O3(001)[100] ‖ Y2O3(001)[100, and YNi2B2C(001)[100] ‖ Y2O3(001)[100 1.5‖ Y2O3(001)[100] ‖ Y2O3(001)[100 (the numeral above the “parallel” symbol represents the misorientation (in degrees) between the [100] ‖ Y2O3(001)[100 directions).

Sign in / Sign up

Export Citation Format

Share Document