Effect of reactive gas condition on nonpolar AlN film growth on MnS/Si (100) by reactive DC sputtering

The effects of reactive gas flow conditions on nonpolar AlN film growth on MnS/Si (100) substrates using reactive DC magnetron sputtering were investigated. During AlN deposition at a substrate temperature of 750 °C, the MnS surface can be unintentionally nitrided, resulting in a decrease in the crystallinity of the AlN. Low temperature growth of the AlN layer at 300 °C prevents this nitridation and results in the crystallization of nonpolar AlN. A N2 flow equal to 30% of the Ar sputtering gas flow was found to improve the crystallinity of the nonpolar AlN and to reduce nitrogen defects, which play an important role in interfacial reactions. Nitrogen defects promote the formation of alloys such as AlMn and MnSi that degrade the interface and can significantly decompose the MnS. A higher proportion of N2 improves the nonpolar AlN crystallinity, reduces the concentration of defects and suppresses reactions at the AlN/MnS interface.

Synthesis, Properties and Aging of ICP-CVD SiCxNy:H Films Formed from Tetramethyldisilazane

Amorphous hydrogenated silicon carbonitride films were synthesized on Si(100), Ge(111), and fused silica substrates using the inductively coupled plasma chemical vapor deposition technique. 1,1,3,3-tetramethyldisilazane (TMDSN) was used as a single-source precursor. The effect of the precursor’s pressure in the initial gas mixture, the substrate temperature, the plasma power, and the flow rate of nitrogen gas as an additional reagent on the film growth rate, element composition, chemical bonding, wettability of film surface, and the optical and mechanical properties of a-SiCxNy:H films was investigated. In situ diagnostic studies of the gas phase have been performed by optical emission spectroscopy during the film deposition process. The long-term stability of films was studied over a period of 375 days. Fourier-transform infrared (FTIR) and X-ray energy dispersive spectroscopy (EDX), and wettability measurements elucidated the oxidation of the SiCxNy:H films deposited using TMDSN + N2 mixture. Films obtained from a mixture with argon had high stability and maintained the stability of element composition after long-term storage in ambient air.

A new method for high resolution curvature measurement applied to stress monitoring in thin films

By combining the well-known grid reflection method with a digital image correlation algorithm and a geometrical optics model, a new method is proposed for measuring the change of curvature of a smooth reflecting substrate, a common reporter of stress state of deposited layers. This tool, called Pattern Reflection for Mapping of Curvature (PReMC), can be easily implemented for the analysis of the residual stress during deposition processes and is sufficiently accurate to follow the compressivetensile-compressive stress transition during the sputtering growth of a Ag film on a Si substrate. Unprecedented resolution below 10-5m-1can be reached when measuring a homogeneous curvature. A comparison with the conventional laser-based tool is also provided in terms of dynamical range and resolution. In addition, the method is capable of mapping local variations in the case of a non-uniform curvature as illustrated by the case of a non-homogeneous Mo film under high compressive stress. PReMC offers interesting perspectives for in situ accurate stress monitoring in the field of thin film growth.

Defect- and H-Free Stoichiometric Silicon Carbide by Thermal CVD from the Single Source Precursor Trisilacyclohexane

Stoichiometric silicon carbide (SiC) thin films were grown using thermal chemical vapor deposition (TCVD) from the single source precursor 1,3,5-trisilacyclohexane (TSCH) on c-Si (100) substrates within an optimized substrate temperature window ranging from 650 to 850 °C. X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FTIR) analyses revealed that the as-deposited films consisted of a Si-C matrix with a Si:C ratio of ~1:1. FTIR and photoluminescence (PL) spectrometry studies showed that films deposited ≥ 750 °C were defect- and H-free within the detection limit of the techniques used, while ellipsometry measurements yielded an as-grown SiC average refractive index of ~2.7, consistent with the reference value for the 3C-SiC phase. The exceptional quality of the films appears sufficient to overcome limitations associated with structural defects ranging from failure in high voltage, high temperature electronics to 2-D film growth. TSCH, a liquid at room temperature with good structural stability during transport and handling as well as high vapor pressure (~10 torr at 25 °C), provides a viable single source precursor for the growth of stoichiometric SiC without the need for post-deposition thermal treatment.