scholarly journals Melting Temperature and Wetting Angle of AlN/Dy2O3 and AlN/Yb2O3 Mixtures on SiC Substrates

2015 ◽  
Vol 18 (5) ◽  
pp. 957-962 ◽  
Author(s):  
Aline Corecha Santos ◽  
Ana Paula Luz ◽  
Sebastião Ribeiro
2007 ◽  
Vol 561-565 ◽  
pp. 1941-1944
Author(s):  
Cheng Huang ◽  
Bo Song ◽  
Pei Zhao

In this paper, the thermodynamic and kinetic requirements of heterogeneous and homogeneous nucleation of metallic melting were suggested. Based on the kinetic requirements of nucleation, the mathematic model of wetting angle of heterogeneous nucleation was developed, Based on the wetting angel model, it was predicted that the maximum undercooling of homogeneous nucleation for melts is two thirds of melting temperature. With the wetting angel model, the wetting angles of different catalysts in liquid iron were calculated, and calculation results are in agreement with that of other researchers.


2019 ◽  
Author(s):  
Samuele Giani ◽  
Naomi M. Towers

Laboratories measuring melting temperature according to USP<741> Melting Range or Temperature, must comply with the amended calibration and adjustment requirements described in this regulation. Compliance is ensured by adjusting the instrument with secondary reference standards, traceable to USP, followed by verification of accuracy using USP primary reference standards.


Alloy Digest ◽  
1981 ◽  
Vol 30 (5) ◽  

Abstract INDALLOY 136 is a bismuth-base, eutectic alloy that melts at 136 F (57.8 C). It is used widely in industry because of its low melting temperature and controlled-shrinkage characteristics. It provides the scientist, engineer and technician with an easily castable material that is ready for use soon after it freezes. The alloy can be recovered easily and recycled into new uses any number of times. Among its uses are anchoring parts for machining, proof casting and low-melting solder. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on casting, heat treating, and machining. Filing Code: Bi-24. Producer or source: Indium Corporation of America.


Alloy Digest ◽  
1979 ◽  
Vol 28 (9) ◽  

Abstract CERROLOW-136 Alloy is a bismuth-base eutectic alloy that melts at 136 F (57.8 C), hence its identifying number. It is widely used in industry because of its low melting temperature and controlled-shrinkage characteristics. Among tis many applications are (1) Anchoring parts such as jet blades for machining, testing and inspection, (2) In the foundry for fusible cores in compound cores and (3) Low-melting solder. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on casting, heat treating, and machining. Filing Code: Bi-13. Producer or source: Cerro Metal Products.


Alloy Digest ◽  
1978 ◽  
Vol 27 (10) ◽  

Abstract CERROLOW-117 Alloy is a bismuth-base eutectic alloy that melts at 117 F (47 C). Its low melting temperature and controlled-shrinkage characteristics make it very useful in industry for such applications as proof casting in tool and die shops, dental models and low-temperature solder. This datasheet provides information on composition, physical properties, hardness, and tensile properties. It also includes information on casting, forming, heat treating, and machining. Filing Code: Bi-8. Producer or source: Cerro Metal Products.


1987 ◽  
Vol 5 (3) ◽  
pp. 370-373 ◽  
Author(s):  
Mitsuo Kato ◽  
Takao Funamoto ◽  
Hiroshi Wachi ◽  
Takeshi Matsuzaka ◽  
Tomohiko Shida ◽  
...  

2021 ◽  
Vol 666 (3) ◽  
pp. 032085
Author(s):  
M P Akimova ◽  
P P Sharin ◽  
S N Makharova ◽  
S P Yakovleva

Processes ◽  
2021 ◽  
Vol 9 (2) ◽  
pp. 383
Author(s):  
Milan Jakubek ◽  
Michal Masařík ◽  
Tomáš Bříza ◽  
Robert Kaplánek ◽  
Kateřina Veselá ◽  
...  

The study of human protoporphyrinogen oxidase (hPPO) inhibition can contribute significantly to a better understanding of some pathogeneses (e.g., porphyria, herbicide exposure) and the development of anticancer agents. Therefore, we prepared new potential inhibitors with Schiff base structural motifs (2-hydroxybenzaldehyde-based Schiff bases 9–13 and chromanone derivatives 17–19) as structurally relevant to PPO herbicides. The inhibitory activities (represented by the half maximal inhibitory concentration (IC50) values) and enzymatic interactions (represented by the hPPO melting temperatures) of these synthetic compounds and commercial PPO herbicides used against hPPO were studied by a protoporphyrin IX fluorescence assay. In the case of PPO herbicides, significant hPPO inhibition and changes in melting temperature were observed for oxyfluorten, oxadiazon, lactofen, butafenacil, saflufenacil, oxadiargyl, chlornitrofen, and especially fomesafen. Nevertheless, the prepared compounds did not display significant inhibitory activity or changes in the hPPO melting temperature. However, a designed model of hPPO inhibitors based on the determined IC50 values and a docking study (by using AutoDock) found important parts of the herbicide structural motif for hPPO inhibition. This model could be used to better predict PPO herbicidal toxicity and improve the design of synthetic inhibitors.


Sign in / Sign up

Export Citation Format

Share Document