scholarly journals Densificação rápida de cerâmicas de SnO2

Cerâmica ◽  
2003 ◽  
Vol 49 (310) ◽  
pp. 116-119 ◽  
Author(s):  
G. J. Pereira ◽  
D. Gouvêa
Keyword(s):  

Os pós à base de óxido de estanho são conhecidos por apresentarem baixa densificação mesmo a temperaturas de sinterização acima de 1500 °C. A introdução de diferentes íons metálicos como Mn2+, Fe3+ e Cu2+ induzem a redução do volume de poros e crescimento de grãos durante a sinterização. Pós à base de SnO2 foram preparados pela rota química derivada da patente de Pechini, contendo diferentes concentrações de Mg2+ ou Fe3+. Todas as amostras apresentaram uma alta taxa de densificação nos momentos iniciais, quando sinterizadas por "fast firing". As amostras contendo 5% em mol de ferro sinterizadas durante 30 s a 1200 °C apresentaram densidades superiores às amostras sinterizadas por aquecimento em taxas normais (10 °C/min) por 4 h a 1200 °C. O fenômeno de eliminação rápida de poros pode ser explicado, levando em conta o papel da superfície no fenômeno de sinterização. A saturação da superfície pelo aditivo foi confirmada por medidas de mobilidade eletroforética dinâmica com base na literatura e em dados experimentais.

1989 ◽  
Vol 37 (1) ◽  
pp. 81 ◽  
Author(s):  
N Findlay ◽  
GP Findlay

In the genus Stylidium, the style and filaments of the flower are fused into a single column. In most species the column, when stimulated mechanically, undergoes a fast firing movement followed by a slow resetting movement. This movement is produced by changes in shape of a normally curved region of the column, the bend. In a wide range of species, the bend has a specialised anatomy and consists essentially of a longitudinal central layer of cells with two distinctive multi-celled layers of thick-walled cells on either side. The thick-walled cells are rich in cytoplasm with amyloplasts and vacuoles of varying sizes, and have non-lignified walls whose cellulose fibrils are arranged approximately transversely. Within the bend, the phloem occurs as discrete small groups of cells separated by some distance from the xylem. In species from the subgenus Centridium both the morphology and the internal structure of the bend differ somewhat from those in most species of Stylidium, and in two species of Stylidium with nonmoving columns, the characteristic cellular anatomy of the bend is entirely absent. The specialised anatomy of the cells and tissues in the bend are clearly associated with the movement of the column. Changes of shape and size of these cells are almost certainly responsible for the change in shape of the bend.


1990 ◽  
Vol 189 ◽  
Author(s):  
Arindam Dé ◽  
Iftikhar Ahmad ◽  
E. Dow Whitney ◽  
David E. Clark

ABSTRACTThe concept of 'hybrid heating with microwave (MW) energy at 2.45 GHZ.'for ultra rapid sintering of alumina is being introduced. This technique is a combination of MW - materual interaction as well as conventional radiant/conduction mechanisms, and facilitates the attainment of perhaps, the highest possible heating rates in a multimode MW cavity at 2.45 GJZz. (1500ºC in 120 sees.). Rapid sintering of pure.undoped alumina with this novel techniQue culminates in uniform, homogeneous microstructures and mechanical property enhancements vis-a-vis conventional fast firing.The role of green microstructure (particle size) on MW(hybrid) heating and processing variables (temperature, time) on the MW (hybrid) heating phenomena vs. conventional fast firing were investigated. Hybrid heated samples showed accelerated densification with comparable grain sizes when compared with the conventionally fast fired samples. The effectof particle size on the microwave (hybrid) heating phenomena was found to be analogous to conventional sintering.


1977 ◽  
Vol 3 (2) ◽  
pp. 65-69 ◽  
Author(s):  
H. Moertel
Keyword(s):  

2015 ◽  
Vol 9 (1) ◽  
pp. 17-22 ◽  
Author(s):  
Myrian Schettino ◽  
José Holanda

Large amounts of waste materials are discarded in the sugarcane industry. This work investigates the reuse of sugarcane bagasse ash waste as an alternative raw material for porcelain stoneware tile bodies, replacing natural quartz by up to 5 wt.%. The tile pieces were fired at 1230 ?C using a fast-firing cycle (< 60min). The technological properties of the fired tile pieces (e.g., linear shrinkage, water absorption, apparent density, and flexural strength) were determined. The sintering process was followed by SEM and XRD analyses. The results show that up to 2.5 wt.% sugarcane bagasse ash waste can be used as a partial replacement for quartz in porcelain stoneware tile (group BIa, ISO 13006 standard), providing excellent technical properties. Hence, its application in high-quality ceramic tile for use in civil construction as a low-cost, alternative raw material could be an ideal means of managing sugarcane bagasse ash waste.


Cell Calcium ◽  
2012 ◽  
Vol 52 (5) ◽  
pp. 405-411 ◽  
Author(s):  
Kirill I. Kuznetsov ◽  
Oleksii O. Grygorov ◽  
Vitaly Yu. Maslov ◽  
Nikolay S. Veselovsky ◽  
Svetlana A. Fedulova

1982 ◽  
Vol 48 (4) ◽  
pp. 875-890 ◽  
Author(s):  
P. C. Schwindt ◽  
W. E. Crill

1. The rhythmic firing properties of cat lumbar motoneurons were determined by intracellular injection of constant-current pulses. The activation thresholds of various membrane current components were subsequently determined in the same neurons using the technique of somatic voltage clamp. Voltage steps were employed that traversed the same voltage range as the membrane potential between rhythmic spikes (the "pacemaker potential"). 2. At fast firing rates (e.g., secondary-range firing), the pacemaker potential remains entirely within the range of voltages over which a previously described (42), persistent, inward, calcium current (Ii) is activated during voltage clamp. Thus Ii is tonically activated and counters the repolarizing, outward, potassium currents during fast firing. At slower firing rates (e.g., primary-range firing), the pacemaker potential only partially enters the voltage range where Ii is activated, and this voltage range may not be entered at all the slowest firing rates. Cells in which Ii deteriorated could not be made to fire at fast rates although they could still fire at slow rates. 3. The use of two independent intracellular microelectrodes allowed accurate measurement of the somatic voltage at which spike initiation occurred ("firing level"). In all cells, firing level increased significantly as steady firing rate increased. During a given injected-current pulse, firing level also exhibited a more moderate variation with time. 4. The variation in firing level was caused by the accommodative properties of the axon initial segment. Except at the fastest firing rates, firing level occurs at less depolarized voltages than the somatic sodium conductance threshold. In addition, somatic sodium current shows minimal inactivation over the voltage range traversed by the pacemaker potentials during slower firing rates. An inactivation of about 50% is attained during the maximum firing rate. 5. We discuss the ways by which Ii activation and thr progressive rise in firing level influence motoneuron rhythmic firing. We propose that the basic role of Ii is to aid in maintaining a linear f-I curve, especially at faster firing rates. We hypothesize that the relative balance between persistent inward and outward ionic currents plays a major role in determining the f-I curve slope among different neurons and between primary- and secondary-range firing of cat lumbar motoneurons.


Sign in / Sign up

Export Citation Format

Share Document