Abstract
Airborne salt accelerates the corrosion of steel materials and, thus, must be quantitatively evaluated for the management of steel structures. In Japan, the dry gauze method, which uses a gauze embedded in a wooden frame, is often used to evaluate the amount of airborne salt. However, its collection efficiency for salt particles has not been verified owing to the complex airflows around the device. Therefore, as a first step to clarify the collection efficiency, the authors simulated the flow field around the collection device using computational fluid dynamics. In this study, the gauze was modeled as a porous medium to reduce the computational costs. Wind tunnel tests were performed to obtain the pressure loss coefficients of the gauze, which is necessary for the porous media method. Subsequently, particle tracking was performed in the calculated flow field, and the collection efficiency was evaluated under the condition of a filtration efficiency of 100%. The flow fields around the device were accurately reproduced using the porous media model, which considered both the tangential and normal resistances of the gauze. This result suggests that the tangential resistance must be considered in the porous media model when the porosity of an object is small, even if the thickness is small. The dependence of collection efficiency on wind speed and direction was quantitatively evaluated. The results showed that the collection efficiency was greatly affected by the complicated flow field around the device due to the combination of the gauze and wooden frame.
Numerical and experimental investigation of utilizing the porous media model for windbreaks CFD simulation
