A NUMERICAL STUDY OF NANOFLUID FORCED CONVECTION IN A POROUS CHANNEL WITH DISCRETE HEAT SOURCES

2014 ◽  
Vol 17 (6) ◽  
pp. 549-561 ◽  
Author(s):  
Payam Rahim Mashaei ◽  
Seyed Mostafa Hosseinalipour
Keyword(s):  
Forced Convection ◽  
Numerical Study ◽  
Porous Channel ◽  
Heat Sources ◽  
Discrete Heat Sources

Forced Convection in a Porous Channel With Localized Heat Sources

1994 ◽  
Vol 116 (2) ◽  
pp. 465-472 ◽  
Author(s):  
A. Hadim
Keyword(s):  
Heat Transfer ◽  
Porous Medium ◽  
Pressure Drop ◽  
Heat Source ◽  
Forced Convection ◽  
Numerical Study ◽  
Porous Channel ◽  
Heat Sources ◽  
Porous Layers ◽  
Channel Configuration

A numerical study is performed to analyze steady laminar forced convection in a channel filled with a fluid-saturated porous medium and containing discrete heat sources on the bottom wall. Hydrodynamic and heat transfer results are reported for two configurations: (1) a fully porous channel, and (2) a partially porous channel, which contains porous layers above the heat sources and is nonporous elsewhere. The flow in the porous medium is modeled using the Brinkman-Forchheimer extended Darcy model. Heat transfer rates and pressure drop are evaluated for wide ranges of Darcy and Reynolds numbers. Detailed results of the evolution of the hydrodynamic and thermal boundary layers are also provided. The results indicate that as the Darcy number decreases, a significant increase in heat transfer is obtained, especially at the leading edge of each heat source. For fixed Reynolds number, the length-averaged Nusselt number reaches an asymptotic value in the Darcian regime. In the partially porous channel, it is found that when the width of the heat source and the spacing between the porous layers are of the same magnitude as the channel height, the heat transfer enhancement is almost the same as in the fully porous channel while the pressure drop is significantly lower. These results suggest that the partially porous channel configuration is a potentially attractive heat transfer augmentation technique for electronic equipment cooling, an end that motivated this study.

scholarly journals Forced Convection through Discrete Heat Sources and Simple Thermal Model – A Numerical Study

2019 ◽  
Vol 4 (6) ◽  
pp. 1397-1406
Author(s):  
Kartikaswami Hasavimath ◽  
Kishan Naik ◽  
Banjara Kotresha ◽  
N. Gnanasekaran
Keyword(s):  
Heat Source ◽  
Forced Convection ◽  
Thermal Model ◽  
Conjugate Heat Transfer ◽  
Numerical Study ◽  
Vertical Channel ◽  
Heat Sources ◽  
Discrete Heat Sources ◽  
Discrete Heat Source ◽  
Bottom Heat

In this work a forced convection through discrete heat sources and simple thermal model placed inside the vertical channel is analyzed numerically. The problem considered for the investigation comprises of a vertical channel with distinct heat source assembly located at the center of the channel. The novelty of the present work is to replace the discrete heat source assembly by a simple thermal model to obtain uniformly distributed temperature and streamlines. A conjugate heat transfer investigation is carried out because the problem domain consists of aluminum solid strips as well as Bakelite strips in discrete heat source assembly which are replaced by a aluminum solid in case of simple thermal model. The numerically obtained data are initially compared with experimental data for the purpose of validation. The temperature of each discrete sources decrease with increase in inlet velocity of the fluid and bottom heat source is able to take higher heat load. The results in terms excess temperature obtained for both discrete heat source and simple thermal model is presented and discussed.

Numerical Study of Forced Convection in a Partially Porous Channel With Discrete Heat Sources

1995 ◽  
Vol 117 (1) ◽  
pp. 46-51 ◽  
Author(s):  
H. A. Hadim ◽  
A. Bethancourt
Keyword(s):  
Heat Transfer ◽  
Porous Medium ◽  
Pressure Drop ◽  
Heat Source ◽  
Heat Transfer Enhancement ◽  
Forced Convection ◽  
Numerical Study ◽  
Heat Sources ◽  
Transfer Enhancement ◽  
Discrete Heat Sources

A numerical study was performed to analyze steady laminar forced convection in a channel partially filled with a fluid-saturated porous medium and containing discrete heat sources on the bottom wall. Hydrodynamic and heat transfer results are reported for the configuration in which the porous layers are located above the heat sources while the rest of the channel is nonporous. The flow in the porous medium was modeled using the Brinkman-Forchheimer extended Darcy model. Parametric studies were conducted to evaluate the effects of variable heat source spacing and heat source width on heat transfer enhancement and pressure drop in the channel. The results indicate that when the heat source spacing was increased within the range considered, there was a negligible change in heat transfer enhancement while the pressure drop decreased significantly. When the heat source width was decreased, there was a moderate increase in heat transfer enhancement and a significant decrease in pressure drop.

Forced Convection in a Porous Channel With Discrete Heat Sources

2000 ◽  
Vol 123 (2) ◽  
pp. 404-407 ◽  
Author(s):  
C. Cui ◽  
X. Y. Huang ◽  
C. Y. Liu
Keyword(s):  
Heat Transfer ◽  
Reynolds Numbers ◽  
Heat Fluxes ◽  
Experimental Results ◽  
Porous Channel ◽  
Heat Sources ◽  
Nusselt Numbers ◽  
Discrete Heat Sources ◽  
Flow Through ◽  
Good Agreement

An experimental study was conducted on the heat transfer characteristics of flow through a porous channel with discrete heat sources on the upper wall. The temperatures along the heated channel wall were measured with different heat fluxes and the local Nusselt numbers were calculated at the different Reynolds numbers. The temperature distribution of the fluid inside the channel was also measured at several points. The experimental results were compared with that predicted by an analytical model using the Green’s integral over the discrete sources, and a good agreement between the two was obtained. The experimental results confirmed that the heat transfer would be more significant at leading edges of the strip heaters and at higher Reynolds numbers.

The Green Function and Its Application to Heat Transfer in a Low Permeability Porous Channel

1999 ◽  
Vol 122 (3) ◽  
pp. 274-278 ◽  
Author(s):  
C. Cui ◽  
X. Y. Huang ◽  
C. Y. Liu
Keyword(s):  
Heat Transfer ◽  
Temperature Field ◽  
Green Function ◽  
Porous Channel ◽  
Low Permeability ◽  
Heat Sources ◽  
Point Heat Source ◽  
Analytical Technique ◽  
Discrete Heat Sources ◽  
The Green Function

This paper describes an analytical technique for heat transfer in a low permeability porous channel with initially a point heat source and then multiple discrete sources. The solution of the temperature field for the point source is derived as a Green function, from which the temperature field for other geometrical heat sources can be obtained by using the Green integral. An application of the Green function and Green integral to the porous channel with discrete heat sources is presented. The results are compared with the existing numerical results and good agreements are achieved. [S1043-7398(00)01503-6]

Sign in / Sign up

Export Citation Format

Share Document