Electrodynamic Modeling of the Antenna Sloper Grid Designed for Random Polarization Wave Direction Finding

2005 ◽  
Vol 64 (2) ◽  
pp. 131-138
Author(s):  
A. V. Ashikhmin ◽  
Yu. G. Pasternak ◽  
A. V. Ostankov
2015 ◽  
Vol 27 (5) ◽  
pp. 612-627 ◽  
Author(s):  
Zhe Liu ◽  
Xing Rong ◽  
Xiuchen Wang ◽  
Zhong Zhou

Purpose – The purpose of this paper is to explore the influence of hole on shielding effectiveness (SE) of electromagnetic shielding (EMS) fabric under incident polarization wave, and to propose a “Key Size” theory to explain the influence mechanism. Design/methodology/approach – “Key Size” parameters describing hole shape are established, and a number of representative samples with rectangular and oval holes are made. SE of the samples are tested by waveguide testing system. Influence of the hole on the SE of the samples is analyzed according to vertical or horizontal maximum size and polarization wave direction. Finally, the “Key Size theory” and “Secondary Size theory” are proposed to explain the influencing mechanism. Findings – The hole influences on the SE are related to the vertical and the horizontal maximum size of the holes and the direction of the polarization wave. As the direction of the polarization wave is vertical (or horizontal), greater maximum size results in lower SE. As the maximum size is constant, greater maximum size causes lower SE. As the maximum size reaches to a certain value, a dividing point of the SE occurs. As the direction of the polarization wave is consistent with the direction of the maximum size, same hole area results in same SE. Originality/value – The explored influences and mechanism provide an important guiding reference for the hole design of the EMS fabric, and can be applied to the holes design of the EMS garment, composite materials, and tents.


2017 ◽  
Vol 89 (3) ◽  
pp. 375-388 ◽  
Author(s):  
Yaping Li ◽  
Xiuchen Wang ◽  
Zhen Pan ◽  
Ying Su ◽  
Zhe Liu ◽  
...  

This study used the DR-SO4 window method to test the shielding effectiveness of silver-plated fiber functional fabric, copper–nickel duplicate coating fabric, and stainless steel fiber-blended-type fabric. These electromagnetic shielding fabrics exhibited different levels of shielding effectiveness under different polarization directions. In the same frequency, the shielding effectiveness difference between the vertical polarization wave direction and horizontal or 45° polarization wave direction is higher in silver-plated fiber functional fabric and copper–nickel duplicate coating fabric than that in stainless steel fiber-blended fabric. The radiation distance of 1.5 m has great influence on the shielding effectiveness of the three fabrics. These fabrics show a repeated and intersected change in wrinkle degrees of 1# and 2#. The fabrics in the wrinkle degree of 2# have higher shielding effectiveness than that of 3#. The wrinkle recovery properties of electromagnetic shielding fabrics also affect their shielding effectiveness. The shielding effectiveness of copper–nickel duplicate coating fabric with low wrinkle recovery property considerably changes. This research provides a basis for the design of electromagnetic shielding fabrics.


2021 ◽  
Vol 5 (1) ◽  
pp. 75-81
Author(s):  
Anatolij Kobziev ◽  
Mykhailo Murzin

Direction finding networks have found application in radio monitoring, radio intelligence and passive radar systems. The operation of the direction-finding network in the short-wave range has a number of distinctive features, namely, long range of direction finders (up to several thousand km) due to ionospheric propagation of radio waves and high sensitivity of narrow-band signal receivers. In addition, the distance between direction finders can be hundreds or thousands of kilometers. Therefore the calculations should be carried out due to the location of the direction finders and radio sources on a spherical surface. In this work, analytical relationships are obtained for calculating the accuracy indicators of the estimation of coordinate information (latitude and longitude) at the output of the direction finding network in a rather general form in relation to the features of the short-wave range. The problem is solved in a geographic coordinate system for an arbitrary number of direction finders (two at least) and with their arbitrary location on the surface of Earth. To carry out a comparative analysis and assess the quality of coordinate information for various options for placing direction finders, it is proposed to display accuracy indicators using working zones (for example, round). The use of working areas allows a visual assessment on the map overall spatial pattern for accuracy indicators direction-finding network. The results of the calculation of working areas direction-finding network shortwave when placing it on the territory of Ukraine in the case of the smallest real errors direction-finding, and a mutual separation distance finders maximum permissible selected. The calculation results reflect the limiting possibilities for the accuracy of determining the coordinates of radio emission sources for such a direction finding network with a minimum number of direction finders (3 or 4). The given method of calculating working zones allows for the implementation of the best accuracy indicators to choose a specific option for placing direction finders on the territory of the country, taking into account the influence of all factors (approach of positions, availability of access roads, conditions for accommodating service personnel, etc.). As an example, the work considers 3 options for the location of direction finders with the maximum separation on the territory of Ukraine. The developed technique can also be used for other passive radar systems with direction finding coordinates, when it is necessary to take into account the spherical form of the Earth. Such a system can include two or more aerial reconnaissance aircraft with direction finders on board, as well as one aircraft or unmanned vehicle that determines coordinates by the method of multiple direction finding on the flight route.


Radio Science ◽  
1995 ◽  
Vol 30 (6) ◽  
pp. 1699-1712 ◽  
Author(s):  
H. P. Ladreiter ◽  
P. Zarka ◽  
A. Lecacheux ◽  
W. Macher ◽  
H. O. Rucker ◽  
...  

2021 ◽  
Author(s):  
Albert Sabban

Compact wideband RF modules are crucial in mm-wave direction finding systems, radars, seekers, and communication systems. This chapter discusses new integrated wideband mm-wave RF modules. It also discusses the design and development of a compact wideband (18–40 GHz) frontend and a wideband (18–40 GHz) switch bank filter (SBF). The frontend electrical specifications determine the system signal-to-noise ratio and the system dynamic range. This chapter presents a low-cost integrated 18–40 GHz wideband compact frontend with a 47 dBm high power limiter. The frontend consists of two channels: a high gain and low gain channel. Wideband MMIC switches are employed to select the required channel. The gain of the high gain channel is around 27 dB with ±1 dB flatness. The noise figure of the module is around 9 dB. This chapter also presents a low-cost, integrated, 18–40 GHz wideband compact SFB module. The wideband SFB consists of three wideband side-coupled microstrip filters. The SFB MIMIC switches operate in the 18 to 40 GHz frequency range and are used to select the required filter. The insertion loss of each filter section is less than 11.5 dB ±1.5 dB. The novelty of this research is the development of compact, integrated wideband mm-wave RF modules for direction finding and communication systems.


Sign in / Sign up

Export Citation Format

Share Document