scholarly journals Zero Voltage Switching in a Low Voltage High Current DC-DC Converter

2016 ◽  
Vol V5 (04) ◽  
Author(s):  
Poornima ◽  
Mrs R. Radha ◽  
Keyword(s):  
Low Voltage ◽  
High Current ◽  
Zero Voltage Switching ◽  
Zero Voltage ◽  
Voltage Switching

A New Interleaved Bidirectional Zero Voltage Switching DC/DC Converter with High Conversion Ratio

2017 ◽  
Vol 26 (06) ◽  
pp. 1750105 ◽  
Author(s):  
Ebrahim Babaei ◽  
Zahra Saadatizadeh ◽  
Behnam Mohammadi Ivatloo
Keyword(s):  
Power Flow ◽  
Low Voltage ◽  
Zero Voltage Switching ◽  
Bidirectional Converters ◽  
Comprehensive Comparison ◽  
Step Down ◽  
High Conversion Ratio ◽  
Bidirectional Power Flow ◽  
Zero Voltage ◽  
Voltage Switching

In this paper, a new interleaved nonisolated bidirectional zero voltage switching (ZVS) dc–dc converter by using one three-windings coupled inductor is proposed. The proposed topology can provide high step-up and high step-down conversion ratios for boost and buck operations, respectively. Moreover, because of interleaving, the proposed converter has low input current ripple at low voltage side in both buck and boost operations. The proposed converter uses lower number of switches to have bidirectional power flow in comparison with other interleaved bidirectional converters. All used switches in the proposed converter are turned on under ZVS. The advantages of the proposed converter in comparison with the conventional interleaved converters are included in the capability of bidirectional power flow, ZVS operation for all switches and high step-up and high step-down voltage gain for boost and buck operations. In this paper, the proposed converter is analyzed completely and all equations of components are extracted as well as the ZVS conditions of all switches. Moreover, a comprehensive comparison between the proposed converter and conventional topologies is presented. To verify the accuracy performance of the proposed converter, the experimental results are given.

scholarly journals Stability Prediction of Soft Switched Isolated DC-DC Converter

2019 ◽  
Vol 9 (2) ◽  
pp. 953-957
Keyword(s):  
High Efficiency ◽  
Low Voltage ◽  
Dynamic Performance ◽  
Stability Prediction ◽  
Leakage Inductance ◽  
Zero Voltage Switching ◽  
Power Semiconductor ◽  
Semiconductor Switches ◽  
Zero Voltage ◽  
Voltage Switching

Mathematical analysis and stability prediction of soft switched isolated dc-dc converter is presented in this paper. Half bridge dc-dc converter is an attractive topology for low voltage applications due to its simplicity, lower cost, improved reliability and enhanced dynamic performance. Both power semiconductor switches of the proposed isolated converter operate asymmetrically under Zero Voltage Switching (ZVS) to achieve high efficiency and low voltage stress. Furthermore, the ringing resulted from the oscillation between the transformer leakage inductance and the junction capacitance of two switches is eliminated. Conversion efficiency is also improved by providing synchronous rectifier with very small output filter. The operating principle, state space analysis and control strategy of proposed converter is explained with small signal model. Experimental results are presented to explain the zero voltage switching capability and stability features of proposed converter.

scholarly journals An Isolated High Voltage Boost Current-Fed DC–DC Converter Based on 1:1 Transformer Multiplier Cells and ZVS Operation

Electronics ◽  
2020 ◽  
Vol 9 (1) ◽  
pp. 102
Author(s):  
Abdulhakeem Alsaleem ◽  
Faleh Alsakran ◽  
Marcelo Godoy Simões
Keyword(s):  
High Frequency ◽  
Output Voltage ◽  
Low Voltage ◽  
Voltage Source ◽  
Design Guideline ◽  
Zero Voltage Switching ◽  
Voltage Stress ◽  
Zero Voltage ◽  
Laboratory Prototype ◽  
Voltage Switching

This paper presents a high step up, current fed, interleaved, isolated DC–DC converter with voltage multipliers and ZVS (zero voltage switching). The converter provides zero voltage switching for all active switches and provides a high step up voltage gain that is suitable for very low voltage source applications, such as PV and other renewable sources. In addition, this converter allows the utilization of very low voltage stress switches and diodes. It reduces the current stress by interleaving the input current, and reduces the voltage stress by utilizing a half bridge based multiplier cell integrated configuration at the output voltage while providing high frequency galvanic isolation. The isolation is achieved through the use of 1:1 transformers which are easier to design, and the need for a high turns ratio is absent in this converter. The main theory of operation and the design guideline are presented, as is a laboratory prototype, all to validate the concept.

scholarly journals Zero‐voltage‐switching buck converter with low‐voltage stress using coupled inductor

2016 ◽  
Vol 9 (4) ◽  
pp. 719-727 ◽  
Author(s):  
Guipeng Chen ◽  
Yan Deng ◽  
Xiangning He ◽  
Yousheng Wang ◽  
Jiangfeng Zhang
Keyword(s):  
Low Voltage ◽  
Buck Converter ◽  
Zero Voltage Switching ◽  
Voltage Stress ◽  
Zero Voltage ◽  
Voltage Switching
Sign in / Sign up

Export Citation Format

Share Document