scholarly journals A study of pedicle screw fixation combined with an intermediate screw at the fracture level for treatment of thoracolumbar burst fractures without Neurological injury

2019 ◽  
Vol 7 (12) ◽  
Author(s):  
Dr Ravi Chandra Yadav Madas ◽  
Keyword(s):  
Pedicle Screw ◽  
Screw Fixation ◽  
Pedicle Screw Fixation ◽  
Neurological Injury ◽  
Thoracolumbar Burst Fractures ◽  
Burst Fractures ◽  
Fracture Level

scholarly journals Short Segment versus Long Segment Pedicle Screws Fixation in Management of Thoracolumbar Burst Fractures: Meta-Analysis

2017 ◽  
Vol 11 (1) ◽  
pp. 150-160 ◽  
Author(s):  
Tarek Ahmed Aly
Keyword(s):  
Pedicle Screw ◽  
Screw Fixation ◽  
Meta Analysis ◽  
Pedicle Screw Fixation ◽  
Risk Of Bias ◽  
Controlled Trials ◽  
Cochrane Central Register ◽  
Thoracolumbar Burst Fractures ◽  
Burst Fractures ◽  
Significant Difference

<p>Posterior pedicle screw fixation has become a popular method for treating thoracolumbar burst fractures. However, it remains unclear whether additional fixation of more segments could improve clinical and radiological outcomes. This meta-analysis was performed to evaluate the effectiveness of fixation levels with pedicle screw fixation for thoracolumbar burst fractures. MEDLINE, EMBASE, the Cochrane Central Register of Controlled Trials, Springer, and Google Scholar were searched for relevant randomized and quasirandomized controlled trials that compared the clinical and radiological efficacy of short versus long segment for thoracolumbar burst fractures managed by posterior pedicle screw fixation. Risk of bias in included studies was assessed using the Cochrane Risk of Bias tool. Based on predefined inclusion criteria, Nine eligible trials with a total of 365 patients were included in this meta-analysis. Results were expressed as risk difference for dichotomous outcomes and standard mean difference for continuous outcomes with 95% confidence interval. Baseline characteristics were similar between the short and long segment fixation groups. No significant difference was identified between the two groups regarding radiological outcome, functional outcome, neurologic improvement, and implant failure rate. The results of this meta-analysis suggested that extension of fixation was not necessary when thoracolumbar burst fracture was treated by posterior pedicle screw fixation. More randomized controlled trials with high quality are still needed in the future.</p>

Finite Element Study to Evaluate the Biomechanical Performance of the Spine After Augmenting Percutaneous Pedicle Screw Fixation With Kyphoplasty in the Treatment of Burst Fractures

2018 ◽  
Vol 140 (6) ◽  
Author(s):  
Shady S. Elmasry ◽  
Shihab S. Asfour ◽  
Francesco Travascio
Keyword(s):  
Finite Element ◽  
Pedicle Screw ◽  
Fatigue Testing ◽  
Screw Fixation ◽  
Pedicle Screw Fixation ◽  
Thoracolumbar Burst Fractures ◽  
Hardware Failure ◽  
Burst Fractures ◽  
Percutaneous Pedicle Screw ◽  
Percutaneous Pedicle Screw Fixation

Percutaneous pedicle screw fixation (PPSF) is a well-known minimally invasive surgery (MIS) employed in the treatment of thoracolumbar burst fractures (TBF). However, hardware failure and loss of angular correction are common limitations caused by the poor support of the anterior column of the spine. Balloon kyphoplasty (KP) is another MIS that was successfully used in the treatment of compression fractures by augmenting the injured vertebral body with cement. To overcome the limitations of stand-alone PPSF, it was suggested to augment PPSF with KP as a surgical treatment of TBF. Yet, little is known about the biomechanical alteration occurred to the spine after performing such procedure. The objective of this study was to evaluate and compare the immediate post-operative biomechanical performance of stand-alone PPSF, stand-alone-KP, and KP-augmented PPSF procedures. Novel three-dimensional (3D) finite element (FE) models of the thoracolumbar junction that describes the fractured spine and the three investigated procedures were developed and tested under mechanical loading conditions. The spinal stiffness, stresses at the implanted hardware, and the intradiscal pressure at the upper and lower segments were measured and compared. The results showed no major differences in the measured parameters between stand-alone PPSF and KP-augmented PPSF procedures, and demonstrated that the stand-alone KP may restore the stiffness of the intact spine. Accordingly, there was no immediate post-operative biomechanical advantage in augmenting PPSF with KP when compared to stand-alone PPSF, and fatigue testing may be required to evaluate the long-term biomechanical performance of such procedures.

scholarly journals Posterior monoaxial screw fixation combined with distraction-compression technology assisted endplate reduction for thoracolumbar burst fractures: a retrospective study

2020 ◽  
Vol 21 (1) ◽  
Author(s):  
Xuhong Xue ◽  
Sheng Zhao
Keyword(s):  
Retrospective Study ◽  
Pedicle Screw ◽  
Screw Fixation ◽  
Pedicle Screws ◽  
Pedicle Screw Fixation ◽  
Thoracolumbar Burst Fractures ◽  
Correction Rate ◽  
Burst Fractures ◽  
The Mean

Abstract Background The management of thoracolumbar burst fractures traditionally involves posterior pedicle screw fixation, but it has some drawbacks. The aim of this study is to evaluate the clinical and radiological outcomes of patients with thoracolumbar burst fractures. They were treated by a modified technique that monoaxial pedicle screws instrumentation and distraction-compression technology assisted end plate reduction. Methods From March 2014 to February 2016, a retrospective study including 42 consecutive patients with thoracolumbar burst fractures was performed. The patients had undergone posterior reduction and instrumentation with monoaxial pedicle screws. The fractured vertebrae were also inserted screws as a push point. The distraction -compression technology was used as assisting end plate reduction. All patients were followed up at a minimum of 2 years. These parameters including segmental kyphosis, severity of fracture, neurological function, canal compromise and back pain were evaluated in preoperatively, postoperatively and at the final follow-up. Results The average follow-up period was 28.9 ± 4.3 months (range, 24-39mo). No patients had postoperative implant failure at recent follow-up. The mean Cobb angle of the kyphosis was improved from 14.2°to 1.1° (correction rate 92.1%). At final follow-up there was 1.5% loss of correction. The mean preoperative wedge angle was improved from 17.1 ± 7.9°to 4.4 ± 3.7°(correction rate 74.3%). The mean anterior and posterior vertebral height also showed significant improvements postoperatively, which were maintained at the final follow-up(P < 0.05). The mean visual analogue scale (VAS) scores was 8 and 1.6 in preoperation and at the last follow-up, and there was significant difference (p < 0.05). Conclusion Based on our experience, distraction-compression technology can assist reduction of collapsed endplate directly. Satisfactory fracture reduction and correction of segmental kyphosis can be achieved and maintained with the use of monoaxial pedicle screw fixation including the fractured vertebra. It may be a good treatment approach for thoracolumbar burst fractures.

Disc Height Change Following Thoracolumbar Burst Fractures Treated with Pedicle Screw Fixation without Fusion

2010 ◽  
Vol 10 (9) ◽  
pp. S17-S18
Author(s):  
Huilin Yang ◽  
Jiayong Liu ◽  
Jinhui Shi ◽  
Molly Ebraheim ◽  
Joseph Konrad ◽  
...  
Keyword(s):  
Pedicle Screw ◽  
Screw Fixation ◽  
Pedicle Screw Fixation ◽  
Disc Height ◽  
Thoracolumbar Burst Fractures ◽  
Burst Fractures ◽  
Height Change

Biomechanical Analysis of Pedicle Screw Fixation for Thoracolumbar Burst Fractures

Orthopedics ◽  
2016 ◽  
Vol 39 (3) ◽  
pp. e514-e518 ◽  
Author(s):  
Matthew McDonnell ◽  
Kalpit N. Shah ◽  
David J. Paller ◽  
Nikhil A. Thakur ◽  
Sarath Koruprolu ◽  
...  
Keyword(s):  
Pedicle Screw ◽  
Screw Fixation ◽  
Pedicle Screw Fixation ◽  
Biomechanical Analysis ◽  
Thoracolumbar Burst Fractures ◽  
Burst Fractures
Sign in / Sign up

Export Citation Format

Share Document