Numerical analysis of the behaviour of a large-diameter monopile for offshore wind turbines

2019 ◽  
Vol 16 (1) ◽  
pp. 53-69
Author(s):  
Marx Ferdinand Ahlinhan ◽  
◽  
Edmond Codjo Adjovi ◽  
Valery Doko ◽  
Herbert Nelson Tigri ◽  
...  
2019 ◽  
Vol 7 (5) ◽  
pp. 134 ◽  
Author(s):  
Rui He ◽  
Ji Ji ◽  
Jisheng Zhang ◽  
Wei Peng ◽  
Zufeng Sun ◽  
...  

With the development of offshore wind energy in China, more and more offshore wind turbines are being constructed in rock-based sea areas. However, the large diameter and thin-walled steel rock-socketed monopiles are very scarce at present, and both the construction and design are very difficult. For the design, the dynamic safety during the whole lifetime of the wind turbine is difficult to guarantee. Dynamic safety of a turbine is mostly controlled by the dynamic impedances of the rock-socketed monopile, which are still not well understood. How to choose the appropriate impedances of the socketed monopiles so that the wind turbines will neither resonant nor be too conservative is the main problem. Based on a numerical model in this study, the accurate impedances are obtained for different frequencies of excitation, different soil and rock parameters, and different rock-socketed lengths. The dynamic stiffness of monopile increases, while the radiative damping decreases as rock-socketed depth increases. When the weathering degree of rock increases, the dynamic stiffness of the monopile decreases, while the radiative damping increases.


2020 ◽  
Vol 10 (21) ◽  
pp. 7579
Author(s):  
Zhaoyao Wang ◽  
Ruigeng Hu ◽  
Hao Leng ◽  
Hongjun Liu ◽  
Yifan Bai ◽  
...  

The displacement of monopile supporting offshore wind turbines needs to be strictly controlled, and the influence of local scour can not be ignored. Using p–y curves to simulate the pile–soil interaction and the finite difference method to calculate iteratively, a numerical frame for analysis of lateral loaded pile was discussed and then verified. On the basis of the field data from Dafeng Offshore Wind Farm in Jiangsu Province, the local scour characteristics of large diameter monopile were concluded, and a new method of considering scour effect applicable to large diameter monopile was put forward. The results show that, for scour of large diameter monopiles, there was no obvious scour pit, but local erosion and deposition. Under the test conditions, the displacement errors between the proposed and traditional method were 46.4%. By the proposed method, the p–y curves of monopile considering the scour effect were obtained through ABAQUS, and the deformation of large diameter monopile under scour was analyzed by the proposed frame. The results show that, with the increase of scour depth, the horizontal displacement of the pile head increases nonlinearly, the depth of rotation point moves downward, and both of the changes are related to the load level. Under the test conditions, the horizontal displacement of the pile head after scour could reach 1.4~3.6 times of that before scour. Finally, for different pile parameters, the pile head displacement was compared, and further, the susceptibility to scour was quantified by a proposed concept of scour sensitivity. The analysis indicates that increasing pile length is a more reasonable way than pile diameter and wall thickness to limit the scour effect on the displacement of large diameter pile.


2014 ◽  
Vol 4 (3) ◽  
pp. 169-183 ◽  
Author(s):  
Min-Su Park ◽  
Youn-Ju Jeong ◽  
Young-Jun You ◽  
Du-Ho Lee ◽  
Byeong-Cheol Kim

2018 ◽  
Vol 13 (8) ◽  
pp. 822-834 ◽  
Author(s):  
Ruiqi Hu ◽  
Puyang Zhang ◽  
Hongyan Ding ◽  
Conghuan Le

Author(s):  
Dominique Roddier ◽  
Christian Cermelli ◽  
Alla Weinstein

This paper and the corresponding hydrodynamic and structural study paper (also in these proceedings) summarize the feasibility study conducted for the WindFloat technology. The WindFloat is a 3-legged floating foundation for very large offshore wind turbines. It is designed to accommodate a wind turbine, 5 MW or larger, on one of the columns of the hull with minimal modifications to the tower, nacelle and turbine. Technologies for floating foundations for offshore wind turbines are evolving. It is agreed by most experts that the offshore wind industry will see a significant increase in activity in the near future. Fixed offshore turbines are limited in water depth to approximately 30∼50m. Market transition to deeper waters is inevitable, provided suitable technologies can be developed. Despite the increase in complexity, a floating foundation offers distinct advantages: • Flexibility in site location. • Access to superior wind resources further offshore. • Ability to locate in coastal regions with limited shallow continental shelf. • Ability to locate further offshore to eliminate visual impacts. • An integrated structure, without a need to redesign the mast foundation connection for every project. • Simplified offshore installation procedures. Anchors are significantly cheaper to install than fixed foundations and large diameter towers. This paper focuses on the design basis for wind turbine floating foundations, and explores the requirements that must be addressed by design teams in this new field. It shows that the design of the hull for a large wind turbine must draw on the synergies with oil and gas offshore platform technology, while accounting for the different design requirements and functionality of the wind turbine.


Author(s):  
Pablo Cuéllar ◽  
Matthias Baeßler ◽  
Werner Rücker

The foundation of offshore wind turbines usually involves the installation of large-diameter steel piles in the seabed, either in monopile or multi-pile configurations (jacket, tripod, etc…), which have to ensure a proper fixity of the turbine during its whole service life-time. However, such foundations raise several challenges and novel questions, partly due to the special characteristics of the offshore environment (for instance, the large numbers of load cycles from wind and waves and the possible influence of transient changes of pore water pressure around the pile) and aggravated by their large diameter, reduced slenderness and elevated ratio of lateral to vertical loads (see Fig. 1). This paper studies the effects of cyclic lateral loading on the offshore piles focusing on the possibility of a progressive accumulation of residual pore water pressure within the saturated embedding soil. As it will be shown, this can lead to significant changes of their behaviour under external loading, which can potentially compromise the foundation’s stability or serviceability. The paper will also analyse some singular effects of an irregular loading (e.g. cyclic loading with variable amplitude), in particular the so-called “order effects” and the phenomena arising during a realistic storm of moderate magnitude, and discuss their potential for transient damages to the foundation’s stiffness. All these phenomena, which can lead to a loss of serviceability of the structure, have been investigated by the authors by means of a coupled bi-phasic analytical model of the offshore foundation featuring a versatile constitutive law suitable for the soil. The constitutive model, in the frame of the theory of Generalized Plasticity, can reproduce some complex features of cyclic soil behaviour such as the tendency for a progressive densification under cyclic loading, which is responsible for the soil liquefaction phenomena in undrained conditions. Finally, some implications of these issues for the practical design of offshore monopiles will be discussed and some specific recommendations for the design procedures will be outlined.


Sign in / Sign up

Export Citation Format

Share Document