WindFloat: A Floating Foundation for Offshore Wind Turbines—Part I: Design Basis and Qualification Process

2009 ◽  
Author(s):  
Dominique Roddier ◽  
Christian Cermelli ◽  
Alla Weinstein
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Oil And Gas ◽  
Large Diameter ◽  
Offshore Wind ◽  
Site Location ◽  
Offshore Wind Turbines ◽  
Design Basis ◽  
Floating Foundation ◽  
Visual Impacts

This paper and the corresponding hydrodynamic and structural study paper (also in these proceedings) summarize the feasibility study conducted for the WindFloat technology. The WindFloat is a 3-legged floating foundation for very large offshore wind turbines. It is designed to accommodate a wind turbine, 5 MW or larger, on one of the columns of the hull with minimal modifications to the tower, nacelle and turbine. Technologies for floating foundations for offshore wind turbines are evolving. It is agreed by most experts that the offshore wind industry will see a significant increase in activity in the near future. Fixed offshore turbines are limited in water depth to approximately 30∼50m. Market transition to deeper waters is inevitable, provided suitable technologies can be developed. Despite the increase in complexity, a floating foundation offers distinct advantages: • Flexibility in site location. • Access to superior wind resources further offshore. • Ability to locate in coastal regions with limited shallow continental shelf. • Ability to locate further offshore to eliminate visual impacts. • An integrated structure, without a need to redesign the mast foundation connection for every project. • Simplified offshore installation procedures. Anchors are significantly cheaper to install than fixed foundations and large diameter towers. This paper focuses on the design basis for wind turbine floating foundations, and explores the requirements that must be addressed by design teams in this new field. It shows that the design of the hull for a large wind turbine must draw on the synergies with oil and gas offshore platform technology, while accounting for the different design requirements and functionality of the wind turbine.

scholarly journals Dynamic Impedances of Offshore Rock-Socketed Monopiles

2019 ◽  
Vol 7 (5) ◽  
pp. 134 ◽  
Author(s):  
Rui He ◽  
Ji Ji ◽  
Jisheng Zhang ◽  
Wei Peng ◽  
Zufeng Sun ◽  
...  
Keyword(s):  
Numerical Model ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Dynamic Stiffness ◽  
Large Diameter ◽  
Offshore Wind ◽  
Offshore Wind Turbines ◽  
Thin Walled ◽  
Rock Parameters ◽  
Radiative Damping

With the development of offshore wind energy in China, more and more offshore wind turbines are being constructed in rock-based sea areas. However, the large diameter and thin-walled steel rock-socketed monopiles are very scarce at present, and both the construction and design are very difficult. For the design, the dynamic safety during the whole lifetime of the wind turbine is difficult to guarantee. Dynamic safety of a turbine is mostly controlled by the dynamic impedances of the rock-socketed monopile, which are still not well understood. How to choose the appropriate impedances of the socketed monopiles so that the wind turbines will neither resonant nor be too conservative is the main problem. Based on a numerical model in this study, the accurate impedances are obtained for different frequencies of excitation, different soil and rock parameters, and different rock-socketed lengths. The dynamic stiffness of monopile increases, while the radiative damping decreases as rock-socketed depth increases. When the weathering degree of rock increases, the dynamic stiffness of the monopile decreases, while the radiative damping increases.

Advanced Concept Offshore Wind Turbine Development

2014 ◽  
Vol 18 (5) ◽  
pp. 728-735 ◽  
Author(s):  
Abdollah A. Afjeh ◽  
◽  
Brett Andersen ◽  
Jin Woo Lee ◽  
Mahdi Norouzi ◽  
...  
Keyword(s):  
Wind Energy ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Cost Savings ◽  
Offshore Wind ◽  
Offshore Wind Turbine ◽  
Offshore Wind Energy ◽  
Offshore Wind Turbines ◽  
Floating Foundation ◽  
The Cost

Development of novel offshore wind turbine designs and technologies are necessary to reduce the cost of offshore wind energy since offshore wind turbines need to withstand ice and waves in addition to wind, a markedly different environment from their onshore counterparts. This paper focuses on major design challenges of offshore wind turbines and offers an advanced concept wind turbine that can significantly reduce the cost of offshore wind energy as an alternative to the current popular designs. The design consists of a two-blade, downwind rotor configuration fitted to a fixed bottom or floating foundation. Preliminary results indicate that cost savings of nearly 25% are possible compared with the conventional upwind wind turbine designs.

WindFloat: A Floating Foundation for Offshore Wind Turbines—Part II: Hydrodynamics Analysis

2009 ◽  
Author(s):  
Christian Cermelli ◽  
Dominique Roddier ◽  
Alexia Aubault
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Hydrodynamic Model ◽  
Offshore Wind ◽  
Scale Model ◽  
Hydrodynamic Analysis ◽  
Offshore Wind Turbines ◽  
Floating Foundation ◽  
Ongoing Work ◽  
Aerodynamic Simulation

WindFloat is a floating foundation for very large offshore wind turbines. This paper describes the hydrodynamic analysis of the hull, as well as ongoing work consisting of coupling hull hydrodynamics with wind-turbine aerodynamic forces. Three main approaches are presented in this paper: - The numerical hydrodynamic model of the platform and its mooring system; - Wave tank testing of a scale model of the platform with simplified aerodynamic simulation of the wind turbine; - FAST, an aerodynamic software package for wind turbine analysis with the ability to be coupled to the hydrodynamic model. These conference proceedings include two other papers presenting the design basis and main systems of this floating foundation [1], as well as structural analysis of the hull and mast [2].

Damage detection in grouted connections using electromechanical impedance spectroscopy

2018 ◽  
Vol 233 (3) ◽  
pp. 947-950 ◽  
Author(s):  
Jochen Moll
Keyword(s):  
Impedance Spectroscopy ◽  
Damage Detection ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Oil And Gas ◽  
Offshore Wind ◽  
Wind Loading ◽  
Offshore Wind Turbine ◽  
Offshore Wind Turbines ◽  
Electromechanical Impedance

Grouted connections are structural joints formed by a cementitious grout cast between two concentric circular tubes. They are widely used in the offshore construction of oil and gas platforms, and for offshore wind turbines (monopiles and jackets). However, their application in offshore wind turbine installations can be critical due to the high bending moments coming from wind loading. Recently, it was found that grouted connections show limited performance in offshore wind turbine installations leading to settlements between the steel tubes and steel/grout debonding. Hence, structural health monitoring techniques for grouted connections are needed that ensure a safe and reliable operation of offshore wind turbines. This short communication describes the successful application of electromechanical impedance spectroscopy for damage detection in grouted connections.

Designing Process and Motion Characteristics of Spar Type Offshore Wind Turbines

2013 ◽  
Author(s):  
Yasunori Nihei ◽  
Tomoki Ikoma ◽  
Minori Kozen ◽  
Fumiya Sato ◽  
Motohiko Murai ◽  
...  
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Oil And Gas ◽  
Type Structure ◽  
Offshore Wind ◽  
Scale Model ◽  
Offshore Wind Turbine ◽  
Offshore Wind Turbines ◽  
Motion Characteristics

In this paper, we will discuss about the designing process and the motion characteristics of the spar type offshore wind turbines. When considering a spar type structure for offshore wind turbines, it is important to take a lot of elements into consideration which have not yet been considered in the case of oil and gas platforms. In this research, we used the following standards to conduct our tests. The limit of the heel angle was 5 degrees when the wind turbines are generating in the rated state. When designing the substructure for this research we have decided to go with a substructure that operates in depth of 100m or more. Following the conditions above we have designed the spar type offshore wind turbine used for this research. In order to compare the simulated result we have created a scale model and performed tank tests under various conditions. Also we observed unexpected motion characteristics in certain mooring arrangement. So we will touch these subjects in this paper.

scholarly journals Improving the Strategy of Maintaining Offshore Wind Turbines through Petri Net Modelling

2021 ◽  
Vol 11 (2) ◽  
pp. 574
Author(s):  
Rundong Yan ◽  
Sarah Dunnett
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Petri Net ◽  
Offshore Wind ◽  
Offshore Wind Turbine ◽  
Maintenance Costs ◽  
Offshore Wind Turbines ◽  
Major Repair ◽  
Wind Turbine System ◽  
Periodic Maintenance

In order to improve the operation and maintenance (O&M) of offshore wind turbines, a new Petri net (PN)-based offshore wind turbine maintenance model is developed in this paper to simulate the O&M activities in an offshore wind farm. With the aid of the PN model developed, three new potential wind turbine maintenance strategies are studied. They are (1) carrying out periodic maintenance of the wind turbine components at different frequencies according to their specific reliability features; (2) conducting a full inspection of the entire wind turbine system following a major repair; and (3) equipping the wind turbine with a condition monitoring system (CMS) that has powerful fault detection capability. From the research results, it is found that periodic maintenance is essential, but in order to ensure that the turbine is operated economically, this maintenance needs to be carried out at an optimal frequency. Conducting a full inspection of the entire wind turbine system following a major repair enables efficient utilisation of the maintenance resources. If periodic maintenance is performed infrequently, this measure leads to less unexpected shutdowns, lower downtime, and lower maintenance costs. It has been shown that to install the wind turbine with a CMS is helpful to relieve the burden of periodic maintenance. Moreover, the higher the quality of the CMS, the more the downtime and maintenance costs can be reduced. However, the cost of the CMS needs to be considered, as a high cost may make the operation of the offshore wind turbine uneconomical.

scholarly journals Impact of Typhoons on Floating Offshore Wind Turbines: A Case Study of Typhoon Mangkhut

2021 ◽  
Vol 9 (5) ◽  
pp. 543
Author(s):  
Jiawen Li ◽  
Jingyu Bian ◽  
Yuxiang Ma ◽  
Yichen Jiang
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Safety Evaluation ◽  
Offshore Wind ◽  
Offshore Wind Turbine ◽  
Motion Response ◽  
Offshore Wind Turbines ◽  
Floating Offshore Wind Turbines ◽  
Coupling Motion

A typhoon is a restrictive factor in the development of floating wind power in China. However, the influences of multistage typhoon wind and waves on offshore wind turbines have not yet been studied. Based on Typhoon Mangkhut, in this study, the characteristics of the motion response and structural loads of an offshore wind turbine are investigated during the travel process. For this purpose, a framework is established and verified for investigating the typhoon-induced effects of offshore wind turbines, including a multistage typhoon wave field and a coupled dynamic model of offshore wind turbines. On this basis, the motion response and structural loads of different stages are calculated and analyzed systematically. The results show that the maximum response does not exactly correspond to the maximum wave or wind stage. Considering only the maximum wave height or wind speed may underestimate the motion response during the traveling process of the typhoon, which has problems in guiding the anti-typhoon design of offshore wind turbines. In addition, the coupling motion between the floating foundation and turbine should be considered in the safety evaluation of the floating offshore wind turbine under typhoon conditions.

scholarly journals Physical Modelling of Offshore Wind Turbine Foundations for TRL (Technology Readiness Level) Studies

2021 ◽  
Vol 9 (6) ◽  
pp. 589
Author(s):  
Subhamoy Bhattacharya ◽  
Domenico Lombardi ◽  
Sadra Amani ◽  
Muhammad Aleem ◽  
Ganga Prakhya ◽  
...  
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Prior Experience ◽  
Physical Modelling ◽  
Offshore Wind ◽  
Offshore Wind Turbine ◽  
Foundation Design ◽  
Offshore Wind Turbines ◽  
Sea Bed ◽  
Geological Conditions

Offshore wind turbines are a complex, dynamically sensitive structure due to their irregular mass and stiffness distribution, and complexity of the loading conditions they need to withstand. There are other challenges in particular locations such as typhoons, hurricanes, earthquakes, sea-bed currents, and tsunami. Because offshore wind turbines have stringent Serviceability Limit State (SLS) requirements and need to be installed in variable and often complex ground conditions, their foundation design is challenging. Foundation design must be robust due to the enormous cost of retrofitting in a challenging environment should any problem occur during the design lifetime. Traditionally, engineers use conventional types of foundation systems, such as shallow gravity-based foundations (GBF), suction caissons, or slender piles or monopiles, based on prior experience with designing such foundations for the oil and gas industry. For offshore wind turbines, however, new types of foundations are being considered for which neither prior experience nor guidelines exist. One of the major challenges is to develop a method to de-risk the life cycle of offshore wind turbines in diverse metocean and geological conditions. The paper, therefore, has the following aims: (a) provide an overview of the complexities and the common SLS performance requirements for offshore wind turbine; (b) discuss the use of physical modelling for verification and validation of innovative design concepts, taking into account all possible angles to de-risk the project; and (c) provide examples of applications in scaled model tests.

scholarly journals A Surface Ice Module for Wind Turbine Dynamic Response Simulation Using FAST

2016 ◽  
Vol 138 (5) ◽  
Author(s):  
Bingbin Yu ◽  
Dale G. Karr ◽  
Huimin Song ◽  
Senu Sirnivas
Keyword(s):  
Dynamic Response ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Structural Response ◽  
Simulation Software ◽  
Offshore Wind ◽  
Foundation Soil ◽  
Offshore Wind Turbines ◽  
Ice Failure ◽  
Lock In

Developing offshore wind energy has become more and more serious worldwide in recent years. Many of the promising offshore wind farm locations are in cold regions that may have ice cover during wintertime. The challenge of possible ice loads on offshore wind turbines raises the demand of modeling capacity of dynamic wind turbine response under the joint action of ice, wind, wave, and current. The simulation software FAST is an open source computer-aided engineering (CAE) package maintained by the National Renewable Energy Laboratory. In this paper, a new module of FAST for assessing the dynamic response of offshore wind turbines subjected to ice forcing is presented. In the ice module, several models are presented which involve both prescribed forcing and coupled response. For conditions in which the ice forcing is essentially decoupled from the structural response, ice forces are established from existing models for brittle and ductile ice failure. For conditions in which the ice failure and the structural response are coupled, such as lock-in conditions, a rate-dependent ice model is described, which is developed in conjunction with a new modularization framework for FAST. In this paper, analytical ice mechanics models are presented that incorporate ice floe forcing, deformation, and failure. For lower speeds, forces slowly build until the ice strength is reached and ice fails resulting in a quasi-static condition. For intermediate speeds, the ice failure can be coupled with the structural response and resulting in coinciding periods of the ice failure and the structural response. A third regime occurs at high speeds of encounter in which brittle fracturing of the ice feature occurs in a random pattern, which results in a random vibration excitation of the structure. An example wind turbine response is simulated under ice loading of each of the presented models. This module adds to FAST the capabilities for analyzing the response of wind turbines subjected to forces resulting from ice impact on the turbine support structure. The conditions considered in this module are specifically addressed in the International Organization for Standardization (ISO) standard 19906:2010 for arctic offshore structures design consideration. Special consideration of lock-in vibrations is required due to the detrimental effects of such response with regard to fatigue and foundation/soil response. The use of FAST for transient, time domain simulation with the new ice module is well suited for such analyses.

Comparison of Spar and Semisubmersible Floater Concepts of Offshore Wind Turbines Using Long-Term Analysis

2015 ◽  
Vol 137 (6) ◽  
Author(s):  
Hasan Bagbanci ◽  
D. Karmakar ◽  
C. Guedes Soares
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Transfer Functions ◽  
Probability Distributions ◽  
Offshore Wind ◽  
Short Term ◽  
Offshore Wind Turbines ◽  
Floating Wind Turbine ◽  
Offshore Floating Wind Turbine

The long-term probability distributions of a spar-type and a semisubmersible-type offshore floating wind turbine response are calculated for surge, heave, and pitch motions along with the side-to-side, fore–aft, and yaw tower base bending moments. The transfer functions for surge, heave, and pitch motions for both spar-type and semisubmersible-type floaters are obtained using the fast code and the results are also compared with the results obtained in an experimental study. The long-term predictions of the most probable maximum values of motion amplitudes are used for design purposes, so as to guarantee the safety of the floating wind turbines against overturning in high waves and wind speed. The long-term distribution is carried out using North Atlantic wave data and the short-term floating wind turbine responses are represented using Rayleigh distributions. The transfer functions are used in the procedure to calculate the variances of the short-term responses. The results obtained for both spar-type and semisubmersible-type offshore floating wind turbine are compared, and the study will be helpful in the assessments of the long-term availability and economic performance of the spar-type and semisubmersible-type offshore floating wind turbine.

Sign in / Sign up

Export Citation Format

Share Document