RFID-indicators for polymer stick insulators

2020 ◽  
pp. 82-88
Author(s):  
Tatyana Anatolyevna Nesenyuk ◽  
◽  
Ekaterina Evgenyevna Poluyanova ◽  
Keyword(s):  
High Voltage ◽  
Transmission Lines ◽  
Electrical Power ◽  
Power Engineering ◽  
Rfid Technology ◽  
Rfid Tag ◽  
Overhead Transmission Lines ◽  
Polymer Insulator ◽  
Technical Control

The paper is devoted to the use of RFID-technology in electrical power engineering, in particular, for controlling the condition of high-voltage equipment of feeding transmission lines. It also describes studies on development of RFID-tag designed to indicate dielectric condition of line polymer insulator. The authors present results of tests of pilot samples of LKi-70/110-4-GP-UKhL1 polymer stick insulators with built-in RFID-indicators. The tests have been executed in accordance with the GOST R 55189-2012 requirements. As a result, the authors have made a conclusion on the possibility of using RFID-technologies for technical control of insulators on overhead transmission lines, high-voltage equipment of traction and transformer substations.

scholarly journals Hidden High Voltage Safety Risks for Parallel High Voltage Transmission Lines

2018 ◽  
Vol 171 ◽  
pp. 02005
Author(s):  
M. Nassereddine ◽  
J. Rizk ◽  
M. Nagrial ◽  
A. Hellany ◽  
N. Moubayed ◽  
...  
Keyword(s):  
High Voltage ◽  
Transmission Lines ◽  
Electrical Power ◽  
Paper Analysis ◽  
Induced Voltage ◽  
Parallel Transmission ◽  
Safety Risks ◽  
Unsafe Condition ◽  
Risk Potential

High voltage (HV) infrastructures market is growing due to the corresponding growth in industries and population. To ensure continuous and reliable electrical power supply, existing substation and transmission lines are being upgraded to accommodate the additional load requirements. These upgrades involve up-rating the existing transmission lines or the installation of new lines. To save on easement cost and reduce the environmental impacts, transmission lines are occupied the same easement or path. This parallel option introduces the risk of induced voltage which could reach an unsafe condition and jeopardize the safety of works and people. This paper analysis and highlight the hidden risk associated with two parallel transmission lines that connected the same high voltage substation. The theoretical study which is supported by the case study shows the high risk potential tempering with the OHEW on the isolated circuit while the other one is still energized

Lightning Overvoltage Analysis and Calculation of 330kV Overhead Transmission Line

2014 ◽  
Vol 556-562 ◽  
pp. 1588-1591
Author(s):  
Xiu Bin Zhang ◽  
Ding Jun Wen ◽  
Ya Ming Sun ◽  
Hong Gang Chen
Keyword(s):  
Transmission Line ◽  
Equivalent Circuit ◽  
High Voltage ◽  
Transmission Lines ◽  
Equivalent Circuit Model ◽  
Voltage Level ◽  
High Voltage Transmission Line ◽  
Overhead Transmission Line ◽  
Overhead Transmission Lines ◽  
Pollution Flashover

Lighting is one of the important reasons of transmission line trip accident. For 330kV and above ultra high voltage transmission line, lighting flashover more frequently occur. To reduce tripping rate effectively and fundamentally, lightning over voltage level should be analyzed besides anti-pollution flashover. In this paper, a simplified equivalent circuit model of a 330kV overhead transmission lines is established. The lightning over voltage of the transmission is analyzed and calculated. Method to reduce the lightning overvoltage is discussed.

scholarly journals A Study for the Measurement of the Minimum Clearance Distance between the 500 kV DC Transmission Line and Vegetation

Energies ◽  
2018 ◽  
Vol 11 (10) ◽  
pp. 2606
Author(s):  
Kumail Kharal ◽  
Chang-Hwan Kim ◽  
Chulwon Park ◽  
Jae-Hyun Lee ◽  
Chang-Gi Park ◽  
...  
Keyword(s):  
High Voltage ◽  
Transmission Lines ◽  
Power Transmission ◽  
Electrical Power ◽  
Long Distance ◽  
Dc Voltage ◽  
Hvdc Transmission ◽  
High Voltage Direct Current ◽  
Dc Line ◽  
Pass Through

High voltage direct current (HVDC) transmission is being widely implemented for long-distance electrical power transmission due to its specific benefits over high voltage alternating current (HVAC) transmission. Most transmission lines pass through forests. Around the HVDC lines, an arc to a nearby tree may be produced. Thus, there should be a minimum possible clearance distance between a live conductor and a nearby tree, named the minimum vegetation clearance distance (MVCD), to avoid short-circuiting. Measurement of minimum clearance distance between the conductor and trees is a significant challenge for a transmission system. In the case of HVAC transmission, a large amount of research has been undertaken in the form of the Gallet equation for the measurement of this distance, whereas for HVDC transmission no substantial work has been done. An equivalent AC voltage value can be derived from the DC voltage value in order to use the Gallet equation. This paper presents an experimental measurement technique for determining the MVCD at 500 kV to verify the results obtained from the Gallet equation in the case of DC voltage. Performing the experiment with a 500 kV DC line is not possible in the laboratory due to safety concerns. Therefore, an experiment up to 60 kV is conducted to measure the MVCD for DC voltage. The measured results achieved from the experiment are then extrapolated to calculate the MVCD at 500 kV.

Sign in / Sign up

Export Citation Format

Share Document