scholarly journals Liquid-Liquid Extraction of Ferric Ions Into the Ionic Liquids

Author(s):  
Katerina Cubova ◽  
Miroslava Semelova ◽  
Mojmir Nemec ◽  
Vit Benes

(200 words) Imidazolium ionic liquids containing acetylacetone, thenoyltrifluoroacetone, or 8-hydroxyquinoline, respectively, were used as the extracting agents for the separation of traces of iron (III) from its aqueous solutions with or without citric and oxalic acids. The results show that 8-hydroxyquinoline in imidazolium ionic liquids extract iron quantitatively from all the tested solutions including complexing ones, regardless indications of unexpected iron behavior/speciation.

Minerals ◽  
2021 ◽  
Vol 12 (1) ◽  
pp. 11
Author(s):  
Katerina Cubova ◽  
Miroslava Semelova ◽  
Mojmir Nemec ◽  
Vit Benes

Imidazolium ionic liquids containing acetylacetone, thenoyltrifluoroacetone, or 8-hydroxyquinoline, respectively, were used as the extracting agents for the separation of traces of iron (III) from its aqueous solutions with or without citric and oxalic acids. The results show that 8-hydroxyquinoline in imidazolium ionic liquids extract iron quantitatively from all the tested solutions including complexing ones, regardless of indications of unexpected iron behavior/speciation.


2020 ◽  
Vol 307 ◽  
pp. 112955 ◽  
Author(s):  
Aneta Łukomska ◽  
Anna Wiśniewska ◽  
Zbigniew Dąbrowski ◽  
Urszula Domańska

RSC Advances ◽  
2014 ◽  
Vol 4 (89) ◽  
pp. 48260-48266 ◽  
Author(s):  
Nicolas Papaiconomou ◽  
Isabelle Billard ◽  
Eric Chainet

Removal of iridium(iv) using hydrophilic or hydrophobic ionic liquids was studied. IrCl62− anionic metal complexes were precipitated out from water using bromide-based ionic liquids, yielding water-insoluble salts with low Ks values. Liquid–liquid extraction of Ir(iv) using [NTf2]-based ionic liquids yielded distribution coefficients up to 70 with [OMIM][NTf2] at pH 2.


2016 ◽  
Vol 171 ◽  
pp. 263-269 ◽  
Author(s):  
Mrutyunjay Panigrahi ◽  
Mariusz Grabda ◽  
Dmytro Kozak ◽  
Arunkumar Dorai ◽  
Etsuro Shibata ◽  
...  

2017 ◽  
Vol 38 (1) ◽  
pp. 97-110 ◽  
Author(s):  
Artur Kubiczek ◽  
Władysław Kamiński

AbstractRoom-temperature ionic liquids (RTILs) are a moderately new class of liquid substances that are characterized by a great variety of possible anion-cation combinations giving each of them different properties. For this reason, they have been termed as designer solvents and, as such, they are particularly promising for liquid-liquid extraction, which has been quite intensely studied over the last decade. This paper concentrates on the recent liquid-liquid extraction studies involving ionic liquids, yet focusing strictly on the separation of n-butanol from model aqueous solutions. Such research is undertaken mainly with the intention of facilitating biological butanol production, which is usually carried out through the ABE fermentation process. So far, various sorts of RTILs have been tested for this purpose while mostly ternary liquid-liquid systems have been investigated. The industrial design of liquid-liquid extraction requires prior knowledge of the state of thermodynamic equilibrium and its relation to the process parameters. Such knowledge can be obtained by performing a series of extraction experiments and employing a certain mathematical model to approximate the equilibrium. There are at least a few models available but this paper concentrates primarily on the NRTL equation, which has proven to be one of the most accurate tools for correlating experimental equilibrium data. Thus, all the presented studies have been selected based on the accepted modeling method. The reader is also shown how the NRTL equation can be used to model liquid-liquid systems containing more than three components as it has been the authors’ recent area of expertise.


2012 ◽  
Vol 33 (1) ◽  
pp. 167-183 ◽  
Author(s):  
Marek Krawczyk ◽  
Kamil Kamiński ◽  
Jerzy Petera

Experimental and numerical investigation of electrostatic spray liquid-liquid extraction with ionic liquids A new concept of an electrostatic spray column for liquid-liquid extraction was investigated. An important problem for separation processes is the presence of azeotropic or close-boiling mixtures in their production, for example heptane with ethanol, since the separation is impossible by ordinary distillation. The use of ionic liquids (IL) as a dispersed solvent specially engineered for any specific organic mixture in terms of selectivity is a key factor to successful separation. As IL present particularly attractive combination of favorable characteristics for the separation of heptane and ethanol, in this work we use 1-butyl-3-methylimidazolium methyl sulfate [BMIM][MeSO4]. Because of high viscosity and relatively high cost of IL a new technique was introduced, consisting in the electrostatically spray generation to enhance the mass transport between the phases. In order to optimally design the geometry of the contactor a series of numerical simulation was performed. Especially multi-nozzle variants for better exploitation of contactor volume were investigated. Experiments showed excellent possibility of control of the dispersion characteristics by applied voltage and thus control of the rate of extraction. The preliminary simulations based on our mathematical model for a three nozzle variant exhibited visual agreement with the theory of electrostatics.


2021 ◽  
Author(s):  
Zenghui Wang ◽  
Pingping Zhao ◽  
Jimin Wu ◽  
Jun Gao ◽  
Lianzheng Zhang ◽  
...  

The design of stable ionic liquids (ILs) has become crucial for efficient liquid-liquid extraction (LLE) of alcohol and water. Porous ionic liquids (PILs), as a special class of ILs, have...


2018 ◽  
Vol 54 (17) ◽  
pp. 2895-2906 ◽  
Author(s):  
Romero Julio ◽  
Carlos Zambra ◽  
Gastón Merlet ◽  
Rene Cabezas ◽  
Gonzalo Correa ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document