separation processes
Recently Published Documents


TOTAL DOCUMENTS

1801
(FIVE YEARS 451)

H-INDEX

63
(FIVE YEARS 12)

2022 ◽  
Vol 35 ◽  
pp. 100732
Author(s):  
Shiyang Chai ◽  
Zhen Song ◽  
Teng Zhou ◽  
Lei Zhang ◽  
Zhiwen Qi

Desalination ◽  
2022 ◽  
Vol 523 ◽  
pp. 115428
Author(s):  
Yakubu Abdullahi Jarma ◽  
Aslı Karaoğlu ◽  
Özge Tekin ◽  
Islam Rashad Ahmed Senan ◽  
Alper Baba ◽  
...  

Author(s):  
Shin-ichi Sawada

Abstract Track-etched nanoporous membranes prepared by swift heavy ion irradiation are promising for separation processes such as water purification. However, one drawback is that multiple pores are undesirably formed by pore overlapping to reduce separation performance. The techniques for predicting the size and amount of multiple pores in detail are still underdeveloped, which hinders the precise membrane design. In this study, a computer simulation program was developed to predict the size distribution of the track-etched pores. The program generates a number of single pores on the virtual grid plane to simulate random ion bombardment, finds multiple pores containing several single pores, and determines the multiple pore size by counting the inside grid points. All the multiple pores are categorized into different size classes, and the areal percentage occupied by the pores belonging to each size class is estimated. The simulation algorithm and the results of a model case simulation were described.


Author(s):  
Tae Jun Yoon ◽  
Jacob D. Riglin ◽  
Prashant Sharan ◽  
Robert P. Currier ◽  
Katie A. Maerzke ◽  
...  

Abstract Specific conductance and frequency-dependent resistance (impedance) data are widely utilized for understanding the physicochemical characteristics of aqueous and non-aqueous fluids and for evaluating the performance of chemical processes. However, the implementation of such an in-situ probe in high-temperature and high-pressure environments is not trivial. This work provides a description of both the hardware and software associated with implementing a parallel-type in-situ electrochemical sensor. The sensor can be used for in-line monitoring of thermal desalination processes and for impedance measurements in fluids at high temperature and pressure. A comparison between the experimental measurements on the specific conductance in aqueous sodium chloride solutions and the conductance model demonstrate that the methodology yields reasonable agreement with both the model and literature data. A combination of hardware components, a softwarebased correction for experimental artifacts, and computational fluid dynamics (CFD) calculations used in this work provide a sound basis for implementing such in-situ electrochemical sensors to measure frequency-dependent resistance spectra.


Atomic Energy ◽  
2022 ◽  
Author(s):  
V. V. Chudanov ◽  
A. E. Aksenova ◽  
A. A. Leonov ◽  
A. A. Makarevich

Membranes ◽  
2022 ◽  
Vol 12 (1) ◽  
pp. 67
Author(s):  
Ecaterina Matei ◽  
Cristina Ileana Covaliu-Mierla ◽  
Anca Andreea Ţurcanu ◽  
Maria Râpă ◽  
Andra Mihaela Predescu ◽  
...  

This paper presents a comprehensive literature review surveying the most important polymer materials used for electrospinning processes and applied as membranes for the removal of emerging pollutants. Two types of processes integrate these membrane types: separation processes, where electrospun polymers act as a support for thin film composites (TFC), and adsorption as single or coupled processes (photo-catalysis, advanced oxidation, electrochemical), where a functionalization step is essential for the electrospun polymer to improve its properties. Emerging pollutants (EPs) released in the environment can be efficiently removed from water systems using electrospun membranes. The relevant results regarding removal efficiency, adsorption capacity, and the size and porosity of the membranes and fibers used for different EPs are described in detail.


Processes ◽  
2021 ◽  
Vol 10 (1) ◽  
pp. 59
Author(s):  
Ewelina Kolankowska ◽  
Dariusz Jan Choszcz ◽  
Piotr Markowski ◽  
Patrycjusz Sebastian Reszczyński ◽  
Adam Józef Lipiński

In machines and devices used for separating and cleaning seed mixtures, the components of such mixtures can be separated in a stream of air. The efficiency of separation of a two-component (model) mixture containing wheat kernels and buckwheat nutlets was investigated. The main crop seeds and other crop seeds imitating impurities accounted for 80% and 20% (w/w), respectively. The experiment involved a pneumatic cleaning device with an immobile conical surface, designed by the authors, where mixture components are separated in a stream of air. The seed mixture was separated in a separator with the shape of an inverted cone, where the seeds were set into motion by a stream of air. The separation efficiency of the analyzed two-component mixture in the designed separator exceeded 78%. Regression equations describing the separation efficiency index of the entire seed mixture (ε) and the separation efficiency of the main crop seeds (ηp) and seeds imitating impurities (ηz) were derived. The coefficient of determination (R2) for the above regression equations describing the separation efficiency of the mixture components (main crop seeds and seeds imitating impurities) and the separation efficiency index of the entire seed mixture ranged from 0.81 to 0.94. This result indicates that the developed equations were characterized by satisfactory and highly satisfactory fit to empirical data, and that they can be applied to accurately predict the quality of the seed separation process in the cleaning device designed by the authors. The developed equations can be effectively used to model and automatically control separation processes in the proposed separator.


Membranes ◽  
2021 ◽  
Vol 12 (1) ◽  
pp. 36
Author(s):  
Svetlana Yu. Markova ◽  
Anton V. Dukhov ◽  
Martin Pelzer ◽  
Maxim G. Shalygin ◽  
Thomas Vad ◽  
...  

Designing hollow fiber (HF) membrane modules occupies one of the key positions in the development of efficient membrane processes for various purposes. In developing HF membrane modules, it is very important to have a uniform HF distribution and flow mixing in the shell side to significantly improve mass transfer and efficiency. This work suggests the application of different textile 3D HF structures (braided hoses and woven tape fabrics). The 3D structures consist of melt-spun, dense HFs based on poly(4-methyl-1-pentene) (PMP). Since the textile processing of HFs can damage the wall of the fiber or close the fiber bore, the membrane properties of the obtained structures are tested with a CO2/CH4 mixture in the temperature range of 0 to 40 °C. It is shown that HFs within the textile structure keep the same transport and separation characteristics compared to initial HFs. The mechanical properties of the PMP-based HFs allow their use in typical textile processes for the production of various membrane structures, even at a larger scale. PMP-based membranes can find application in separation processes, where other polymeric membranes are not stable. For example, they can be used for the separation of hydrocarbons or gas mixtures with volatile organic compounds.


Author(s):  
O. L. Voitik ◽  
K. I. Delendik ◽  
N. V. Kolyago

Anodic alumina membranes with an ordered microstructure have been synthesized and investigated. It was found that Knudsen diffusion is the predominant mechanism for gas penetration through the obtained membranes. The technology made it possible to obtain porous membranes with specified structural characteristics for the separation of gas mixtures. Designs of a diffusion element and a gas separation module based on membranes made of anodic aluminum oxide have been developed, and the features of mass transfer under various operating conditions have been studied. The membrane module without recirculation made it possible to concentrate the heavy component from the model helium-methane mixture (99 % / 1 %) up to 18 %. The membrane module with recirculation made it possible to concentrate a light component from a model helium-methane mixture (1 % / 99 %) up to 40 %.


Sign in / Sign up

Export Citation Format

Share Document