scholarly journals Modeling and nonlinear energy-based anti-swing control of underactuated dual ship-mounted cranes systems

Author(s):  
Die Hu ◽  
Yuzhe Qian ◽  
Yongchun Fang ◽  
Yuzhu Chen

Abstract As the volume and the mass of the payload increases, it is often necessary to use two ship-mounted cranes to jointly transport huge payloads under marine environment. Compared with a single ship-mounted crane, dual ship-mounted cranes contain more state variables, geometric constraints and coupling dynamics, which bring more challenges in kinematic analysis and controller design for such complicated underactuated systems. In order to solve these problems, the dynamic model of the dual ship-mounted cranes systems are established based on Lagrange's method. Considering different practical requirements, two energy-based nonlinear controllers for dual ship-mounted cranes are developed, including a full state feedback control method and an output feedback control method. More preciously, during the control design process, the saturation constraints of the controllers have been fully considered. Meanwhile, the proposed controllers can achieve accurate positioning of the double-constrained derricks as well as effective elimination of payload swing. The stability of the equilibrium point of the closed-loop system is analyzed by using Lyapunov techniques and Lasalle's invariance principle. As far as we know, the modeling and the output feedback controller design of dual ship-mounted cranes are proposed for the first time in this paper. At the same time, the design and analysis process does not need to linearize the complex nonlinear dynamics equations, while the proposed output feedback control method is robust against the situations when the velocity signals are unknown/unavailable. Finally, a series of experiments are carried out to verify the effectiveness of the proposed nonlinear controllers.

Energies ◽  
2020 ◽  
Vol 13 (17) ◽  
pp. 4570
Author(s):  
Chao Liu ◽  
Weiqiang Zhao ◽  
Jie Li

This paper presents a gain scheduling output feedback control method to reduce driver workload and improve driving performance by considering input saturation. The driver–vehicle system model is developed by considering tire cornering stiffness uncertainties and different driver parameter uncertainties. Meanwhile, the input saturation is also considered in the driver-vehicle system. A quadratic Lyapunov function is designed to solve the optimization problem with uncertainties and input saturation. The results, which are based on the MATLAB-CarSim co-simulation platform, indicate that the robust controller not only improves the convergence rate of the state but also reduces the steering workload of the driver.


2020 ◽  
Vol 42 (14) ◽  
pp. 2822-2829
Author(s):  
Kexin Xu ◽  
Xianqing Wu ◽  
Miao Ma ◽  
Yibo Zhang

In this paper, we consider the control issues of the two-dimensional translational oscillator with rotational actuator (2DTORA) system, which has two translational carts and one rotational rotor. An output feedback controller for the 2DTORA system is proposed, which can prevent the unwinding behaviour. In addition, the velocity signal unavailability and actuator saturation are taken into account, simultaneously. In particular, the dynamics of the 2DTORA system are given first. On the basis of the passivity and control objectives of the 2DTORA system, an elaborate Lyapunov function is constructed. Then, based on the introduced Lyapunov function, a novel output feedback control method is proposed straightforwardly for the 2DTORA system. Lyapunov theory and LaSalle’s invariance principle are utilized to analyse the stability of the closed-loop system and the convergence of the states. Finally, simulation results are provided to illustrate the excellent control performance of the proposed controller in comparison with the existing method.


2017 ◽  
Vol 55 (3) ◽  
pp. 324
Author(s):  
Nguyen Doan Phuoc ◽  
Pham Van Hung ◽  
Hoang Duc Quynh

Very few output feedback control methods can be applied for a large class of nonlinear objects. If the control problem has supplementary constraints to satisfy, the number of suitable methods will be fewer. The paper proposes a nonlinear control method, which can be applied to output tracking control a wide range of various perturbed nonlinear objects. This output feedback controller is established based on piecewise quadratic optimizing subjected to input constraints for state feedback control and then combined with an appropriate EKF or UKF for system state observation. The simulation results obtained by applying this proposed controller to output tracking control inverted pendulum and boiler-turbine unit had confirmed its promising applicability in practice.


Sign in / Sign up

Export Citation Format

Share Document