Dual Isoform Sequencing Reveals a Multifaceted Transcriptional Architecture of a Prototype Baculovirus

2021 ◽  
Author(s):  
Gábor Torma ◽  
Dóra Tombácz ◽  
Norbert Moldován ◽  
Ádám Fülöp ◽  
István Prazsák ◽  
...  
Keyword(s):  
Protein Coding ◽  
Rna Molecules ◽  
Non Coding Rna ◽  
Oxford Nanopore ◽  
The Pacific ◽  
Viral Genes ◽  
Long Read ◽  
Oxford Nanopore Technologies ◽  
Overlapping Transcripts

Abstract In this study, we used two long-read sequencing (LRS) techniques, Sequel from the Pacific Biosciences and MinION from Oxford Nanopore Technologies, for the transcriptional characterization of a prototype baculovirus, Autographacalifornica multiple nucleopolyhedrovirus. LRS is able to read full-length RNA molecules, and thereby to distinguish between transcript isoforms, mono- and polycistronic RNAs, and overlapping transcripts. Altogether, we detected 875 transcripts, of which 759 are novel and 116 have been annotated previously. These RNA molecules include 41 novel putative protein coding transcript (each containing 5’-truncated in-frame ORFs), 14 monocistronic transcripts, 99 multicistronic RNAs, 101 non-coding RNA, and 504 length isoforms. We also detected RNA methylation in 12 viral genes and RNA hyper-editing in the longer 5’-UTR transcript isoform of ORF 19 gene.

scholarly journals Nanopore long-read RNA-seq and absolute quantification delineate transcription dynamics in early embryo development of an insect pest

2021 ◽  
Author(s):  
Anthony Bayega ◽  
Spyros Oikonomopoulos ◽  
Maria-Eleni Gregoriou ◽  
Konstantina T. Tsoumani ◽  
Yu Chang Wang ◽  
...  
Keyword(s):  
Insect Pest ◽  
Absolute Quantification ◽  
Early Embryo ◽  
Model Organisms ◽  
Rna Molecules ◽  
Oxford Nanopore ◽  
Long Read ◽  
Gene Expression Quantification ◽  
Oxford Nanopore Technologies

Abstract The Oxford Nanopore Technologies’ long-read RNA sequencing (RNAseq) platform can yield full length transcripts that can be very instrumental in improving the characterization of non-model organisms. The resolution of RNAseq can be increased by addition of external RNA molecules of known concentration such as ERCC in order to obtain absolute gene expression quantification. This protocol details the procedure to use ONT long-read RNAseq with addition of ERCC external RNAs. This protocol can be used with total RNA extracted from any source for which transcripts with a poly(A) tail at the 3’ end are the target. The protocol should be possible to complete in a single day (12 hours) followed by sequencing which takes another 48 hours.

scholarly journals Microbial diversity characterization of seawater in a pilot study using Oxford Nanopore Technologies long-read sequencing

2020 ◽  
Author(s):  
Michael Liem ◽  
Tonny Regensburg-Tuïnk ◽  
Christiaan Henkel ◽  
Hans Jansen ◽  
Herman Spaink
Keyword(s):  
Microbial Diversity ◽  
Environmental Samples ◽  
Sea Water ◽  
Flow Cells ◽  
Oxford Nanopore ◽  
Challenging Tasks ◽  
Long Read ◽  
Close Relatives ◽  
Oxford Nanopore Technologies

Abstract Objective: Currently the majority of non-culturable microbes in sea water are yet to be discovered, Nanopore offers a solution to overcome the challenging tasks to identify the genomes and complex composition of oceanic microbiomes. In this study we evaluate the utility of Oxford Nanopore Technologies (ONT) sequencing to characterize microbial diversity in seawater from multiple locations. We compared the microbial species diversity of retrieved environmental samples from two different locations and time points.Results: With only three ONT flow cells we were able to identify thousands of organisms, including bacteriophages, from which a large part at species level. It was possible to assemble genomes from environmental samples with Flye. In several cases this resulted in >1 Mbp contigs and in the particular case of a Thioglobus singularis species it even produced a near complete genome. k-mer analysis reveals that a large part of the data represents species of which close relatives have not yet been deposited to the database. These results show that our approach is suitable for scalable genomic investigations such as monitoring oceanic biodiversity and provides a new platform for education in biodiversity.

scholarly journals Plasmidome analysis of carbapenem-resistant Enterobacteriaceae isolated in Vietnam

2020 ◽  
Author(s):  
Aki Hirabayashi ◽  
Koji Yahara ◽  
Satomi Mitsuhashi ◽  
So Nakagawa ◽  
Tadashi Imanishi ◽  
...  
Keyword(s):  
Carbapenem Resistance ◽  
Genomic Epidemiology ◽  
Carbapenem Resistant ◽  
Oxford Nanopore ◽  
Carbapenemase Gene ◽  
Long Read ◽  
Severe Infections ◽  
Oxford Nanopore Technologies ◽  
Carbapenem Resistant Enterobacteriaceae

Carbapenem-resistant Enterobacteriaceae (CRE) represent a serious threat to public health due to limited management of severe infections and high mortality. The rate of resistance of Enterobacteriaceae isolates to major antimicrobials, including carbapenems, is much higher in Vietnam than in Western countries, but the reasons remain unknown due to the lack of genomic epidemiology research. A previous study suggested that carbapenem resistance genes, such as the carbapenemase gene bla NDM-1 , spread via plasmids among Enterobacteriaceae in Vietnam. In this study, we performed detection and molecular characterization of bla NDM-1 -carrying plasmids in CRE isolated in Vietnam, and identified several possible cases of horizontal transfer of plasmids both within and among species of bacteria. Twenty-five carbapenem-resistant isolates from Enterobacteriaceae clinically isolated in a reference medical institution in Hanoi were sequenced on Illumina short-read sequencers, and 12 isolates harboring bla NDM-1 were sequenced on an Oxford Nanopore Technologies long-read sequencer to obtain complete plasmid sequences. Most of the plasmids co-carried genes conferring resistance to clinically relevant antimicrobials, including third-generation cephalosporins, aminoglycosides, and fluoroquinolones, in addition to bla NDM-1 , leading to multidrug resistance of their bacterial hosts. These results provide insight into the genetic basis of CRE in Vietnam, and could help control nosocomial infections.

scholarly journals Microbial diversity characterization of seawater in a pilot study using Oxford Nanopore Technologies long-read sequencing

2020 ◽  
Author(s):  
Michael Liem ◽  
A.J.G. Regensburg-Tuïnk ◽  
C.V. Henkel ◽  
H.P. Spaink
Keyword(s):  
Microbial Diversity ◽  
Environmental Samples ◽  
Sea Water ◽  
Flow Cells ◽  
Oxford Nanopore ◽  
Challenging Tasks ◽  
Long Read ◽  
Close Relatives ◽  
Oxford Nanopore Technologies

Abstract Objective Currently the majority of non-culturable microbes in sea water are yet to be discovered, Nanopore offers a solution to overcome the challenging tasks to identify the genomes and complex composition of oceanic microbiomes. In this study we evaluate the utility of Oxford Nanopore Technologies (ONT) sequencing to characterize microbial diversity in seawater from multiple locations. We compared the microbial species diversity of retrieved environmental samples from two different locations and time points. Results With only three ONT flow cells we were able to identify thousands of organisms, including bacteriophages, from which a large part at species level. It was possible to assemble genomes from environmental samples with Flye. In several cases this resulted in >1 Mbp contigs and in the particular case of a Thioglobus singularis species it even produced a near complete genome. k-mer analysis reveals that a large part of the data represents species of which close relatives have not yet been deposited to the database. These results show that our approach is suitable for scalable genomic investigations such as monitoring oceanic biodiversity and provides a new platform for education in biodiversity.

scholarly journals Microbial diversity characterization of seawater in a pilot study using Oxford Nanopore Technologies long-read sequencing

2021 ◽  
Vol 14 (1) ◽  
Author(s):  
M. Liem ◽  
T. Regensburg-Tuïnk ◽  
C. Henkel ◽  
H. Jansen ◽  
H. Spaink
Keyword(s):  
Microbial Diversity ◽  
Environmental Samples ◽  
Sea Water ◽  
Flow Cells ◽  
Oxford Nanopore ◽  
Challenging Tasks ◽  
Long Read ◽  
Close Relatives ◽  
Oxford Nanopore Technologies

Abstract Objective Currently the majority of non-culturable microbes in sea water are yet to be discovered, Nanopore offers a solution to overcome the challenging tasks to identify the genomes and complex composition of oceanic microbiomes. In this study we evaluate the utility of Oxford Nanopore Technologies (ONT) sequencing to characterize microbial diversity in seawater from multiple locations. We compared the microbial species diversity of retrieved environmental samples from two different locations and time points. Results With only three ONT flow cells we were able to identify thousands of organisms, including bacteriophages, from which a large part at species level. It was possible to assemble genomes from environmental samples with Flye. In several cases this resulted in > 1 Mbp contigs and in the particular case of a Thioglobus singularis species it even produced a near complete genome. k-mer analysis reveals that a large part of the data represents species of which close relatives have not yet been deposited to the database. These results show that our approach is suitable for scalable genomic investigations such as monitoring oceanic biodiversity and provides a new platform for education in biodiversity.

scholarly journals Microbial diversity characterization of seawater in a pilot study using Oxford Nanopore Technologies long-read sequencing

2020 ◽  
Author(s):  
M. Liem ◽  
A.J.G. Regensburg-Tuïnk ◽  
C.V. Henkel ◽  
H.P. Spaink
Keyword(s):  
Microbial Diversity ◽  
Environmental Samples ◽  
Sea Water ◽  
Flow Cells ◽  
Oxford Nanopore ◽  
Challenging Tasks ◽  
Long Read ◽  
Close Relatives ◽  
Oxford Nanopore Technologies

ABSTRACTCurrently the majority of non-culturable microbes in sea water are yet to be discovered, Nanopore offers a solution to overcome the challenging tasks to identify the genomes and complex composition of oceanic microbiomes. In this study we evaluate the utility of Oxford Nanopore Technologies (ONT) sequencing to characterize microbial diversity in seawater from multiple locations. We compared the microbial species diversity of retrieved environmental samples from two different locations and time points. With only three ONT flow cells we were able to identify thousands of organisms, including bacteriophages, from which a large part at species level. It was possible to assemble genomes from environmental samples with Flye. In several cases this resulted in >1 Mbp contigs and in the particular case of a Thioglobus singularis species it even produced a near complete genome. k-mer analysis reveals that a large part of the data represents species of which close relatives have not yet been deposited to the database. These results show that our approach is suitable for scalable genomic investigations such as monitoring oceanic biodiversity and provides a new platform for education in biodiversity

scholarly journals Genome Sequence Data of Peronophythora litchii, an Oomycete Pathogen Causing Litchi Downy Blight

2021 ◽  
Author(s):  
Hengyuan Guo ◽  
Jiandong Bao ◽  
Lianyu Lin ◽  
Zhixin Wang ◽  
Mingyue Shi ◽  
...  
Keyword(s):  
Genome Assembly ◽  
Sequence Data ◽  
Protein Coding ◽  
Rxlr Effectors ◽  
Oxford Nanopore ◽  
Long Read ◽  
Infection Mechanisms ◽  
Oomycete Pathogen ◽  
High Quality Genome ◽  
Oxford Nanopore Technologies

Peronophythora litchii is an oomycete pathogen that exclusively infects litchi, with infection stages affecting a broad range of tissues. In this study, we obtained a near chromosome-level genome assembly of P. litchii strain ZL2018 from China using Oxford Nanopore Technologies (ONT) long-read sequencing and Illumina short-read sequencing. The genome assembly was 64.15 Mb in size and consisted of 81 contigs with an N50 of 1.43 Mb and a maximum length of 4.74 Mb. Excluding 34.67% of repeat sequences, a total of 14,857 protein-coding genes were identified, among which 14,447 genes were annotated. We also predicted 306 candidate RXLR effectors in the assembly. The high-quality genome assembly and annotation resources reported in this study will provide new insight into the infection mechanisms of P. litchii.

scholarly journals Chromosomal-level assembly of the blood clam, Scapharca (Anadara) broughtonii, using long sequence reads and Hi-C

GigaScience ◽  
2019 ◽  
Vol 8 (7) ◽  
Author(s):  
Chang-Ming Bai ◽  
Lu-Sheng Xin ◽  
Umberto Rosani ◽  
Biao Wu ◽  
Qing-Chen Wang ◽  
...  
Keyword(s):  
Reference Genome ◽  
De Novo ◽  
Marine Bivalve ◽  
Protein Coding ◽  
Long Reads ◽  
Oxford Nanopore ◽  
The Pacific ◽  
The Family ◽  
Long Read ◽  
Blood Clam

Abstract Background The blood clam, Scapharca (Anadara) broughtonii, is an economically and ecologically important marine bivalve of the family Arcidae. Efforts to study their population genetics, breeding, cultivation, and stock enrichment have been somewhat hindered by the lack of a reference genome. Herein, we report the complete genome sequence of S. broughtonii, a first reference genome of the family Arcidae. Findings A total of 75.79 Gb clean data were generated with the Pacific Biosciences and Oxford Nanopore platforms, which represented approximately 86× coverage of the S. broughtonii genome. De novo assembly of these long reads resulted in an 884.5-Mb genome, with a contig N50 of 1.80 Mb and scaffold N50 of 45.00 Mb. Genome Hi-C scaffolding resulted in 19 chromosomes containing 99.35% of bases in the assembled genome. Genome annotation revealed that nearly half of the genome (46.1%) is composed of repeated sequences, while 24,045 protein-coding genes were predicted and 84.7% of them were annotated. Conclusions We report here a chromosomal-level assembly of the S. broughtonii genome based on long-read sequencing and Hi-C scaffolding. The genomic data can serve as a reference for the family Arcidae and will provide a valuable resource for the scientific community and aquaculture sector.

scholarly journals Chromosome-scale assembly of the Sparassis latifolia genome obtained using long-read and Hi-C sequencing

2021 ◽  
Author(s):  
Chi yang ◽  
Lu Ma ◽  
Donglai Xiao ◽  
Xiaoyu Liu ◽  
Xiaoling Jiang ◽  
...  
Keyword(s):  
Repetitive Sequences ◽  
Draft Genome ◽  
Edible Mushroom ◽  
Illumina Hiseq ◽  
Protein Coding ◽  
Long Reads ◽  
Oxford Nanopore ◽  
Genome Features ◽  
Long Read ◽  
Genomic Studies

Sparassis latifolia is a valuable edible mushroom cultivated in China. In 2018, our research group reported an incomplete and low quality genome of S. latifolia was obtained by Illumina HiSeq 2500 sequencing. These limitations in the available genome have constrained genetic and genomic studies in this mushroom resource. Herein, an updated draft genome sequence of S. latifolia was generated by Oxford Nanopore sequencing and the Hi-C technique. A total of 8.24 Gb of Oxford Nanopore long reads representing ~198.08X coverage of the S. latifolia genome were generated. Subsequently, a high-quality genome of 41.41 Mb, with scaffold and contig N50 sizes of 3.31 Mb and 1.51 Mb, respectively, was assembled. Hi-C scaffolding of the genome resulted in 12 pseudochromosomes containing 93.56% of the bases in the assembled genome. Genome annotation further revealed that 17.47% of the genome was composed of repetitive sequences. In addition, 13,103 protein-coding genes were predicted, among which 98.72% were functionally annotated. BUSCO assay results further revealed that there were 92.07% complete BUSCOs. The improved chromosome-scale assembly and genome features described here will aid further molecular elucidation of various traits, breeding of S. latifolia, and evolutionary studies with related taxa.

scholarly journals TagSeqTools: a flexible and comprehensive analysis pipeline for NAD tagSeq data

2020 ◽  
Author(s):  
Huan Zhong ◽  
Zongwei Cai ◽  
Zhu Yang ◽  
Yiji Xia
Keyword(s):  
Rna Sequencing ◽  
Comprehensive Analysis ◽  
Enzymatic Reactions ◽  
Computational Tool ◽  
Sequencing Data ◽  
Analysis Pipeline ◽  
Oxford Nanopore ◽  
Long Read ◽  
Identification And Characterization

AbstractNAD tagSeq has recently been developed for the identification and characterization of NAD+-capped RNAs (NAD-RNAs). This method adopts a strategy of chemo-enzymatic reactions to label the NAD-RNAs with a synthetic RNA tag before subjecting to the Oxford Nanopore direct RNA sequencing. A computational tool designed for analyzing the sequencing data of tagged RNA will facilitate the broader application of this method. Hence, we introduce TagSeqTools as a flexible, general pipeline for the identification and quantification of tagged RNAs (i.e., NAD+-capped RNAs) using long-read transcriptome sequencing data generated by NAD tagSeq method. TagSeqTools comprises two major modules, TagSeek for differentiating tagged and untagged reads, and TagSeqQuant for the quantitative and further characterization analysis of genes and isoforms. Besides, the pipeline also integrates some advanced functions to identify antisense or splicing, and supports the data reformation for visualization. Therefore, TagSeqTools provides a convenient and comprehensive workflow for researchers to analyze the data produced by the NAD tagSeq method or other tagging-based experiments using Oxford nanopore direct RNA sequencing. The pipeline is available at https://github.com/dorothyzh/TagSeqTools, under Apache License 2.0.

Sign in / Sign up

Export Citation Format

Share Document