scholarly journals Ultra-chaos: an insurmountable objective obstacle of reproducibility and replicability

2021 ◽  
Author(s):  
Shijun LIAO ◽  
Shijie Qin
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Chaos Theory ◽  
Statistical Significance ◽  
Scientific Progress ◽  
Turbulence Theory ◽  
New Classification ◽  
Computational Fluid Dynamics Cfd ◽  
Small Disturbances

Abstract It is crucial for scientific progress to be able to replicate scientific findings [1-4], because scientific claims should gain credence due to the reproducibility and replicability of their main supporting evidences. However, according to Nature’s survey of 1,576 researchers, more than 70% of the surveyed failed to reproduce another scientist’s experiments, and more than half agreed that there exists a significant “crisis of reproducibility” [2]. Here we reveal a new classification of chaos: normal-chaos and ultra-chaos. Unlike a normal-chaos, statistics of an ultra-chaos are sensitive to small disturbances. Some illustrative examples of ultra-chaos are given here. It is found that statistical non-reproducibility is indeed an inherent property of an ultra-chaos that is at a higher-level of disorder than a normal-chaos. It is impossible in practice to replicate experimental/numerical results of an ultra-chaos even in statistical meanings, since random environmental noises always exist and are out of control. Thus, ultra-chaos is indeed an insurmountable objective obstacle of reproducibility and replicability. Similar to Goedel’s incompleteness theorem, such kind of “incompleteness of reproducibility” reveals a limitation of scientific researches. It opens a new door and possibility to study reproducibility crisis, statistical significance, computational fluid dynamics (CFD), chaos theory, turbulence theory, and so on.

Modeling of Coal-Biomass Fluidization Using Computational Fluid Dynamics

2013 ◽  
Author(s):  
Bahareh Estejab ◽  
Francine Battaglia
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Hybrid Poplar ◽  
Particle Interactions ◽  
Particle Mixing ◽  
Bed Height ◽  
Wood Particles ◽  
Computational Fluid Dynamics Cfd ◽  
Computational Platform

In an effort to assess the fluidization characteristics of coal-biomass mixtures, computational fluid dynamics (CFD) was used and validated. The gas and solids phases were modeled using an Eulerian-Eulerian approach to efficiently simulate the physics. The computational platform Multiphase Flow with Interphase eXchanges (MFIX) was employed to simulate the particle-particle interactions of coal-biomass mixtures and compare the predictions with experimental data. The coal-biomass mixtures included sub-bituminous coal and hybrid poplar wood. Particles properties of both materials fall within the Geldart A classification. Of particular interest to this study was predicting particle mixing in fluidized beds and biomass hydrodynamics. Both materials and two mass ratio mixtures were studied and pressure drop across the bed for various gas inlet velocities and bed height were analyzed and compared to the experiments.

Efficiency prediction for storage chambers using computational fluid dynamics

1996 ◽  
Vol 33 (9) ◽  
pp. 163-170 ◽  
Author(s):  
Virginia R. Stovin ◽  
Adrian J. Saul
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Shear Stress ◽  
Particle Tracking ◽  
Critical Value ◽  
Complex Geometries ◽  
Bed Shear Stress ◽  
Breadth Ratio ◽  
Computational Fluid Dynamics Cfd ◽  
Simulated Flow

Research was undertaken in order to identify possible methodologies for the prediction of sedimentation in storage chambers based on computational fluid dynamics (CFD). The Fluent CFD software was used to establish a numerical model of the flow field, on which further analysis was undertaken. Sedimentation was estimated from the simulated flow fields by two different methods. The first approach used the simulation to predict the bed shear stress distribution, with deposition being assumed for areas where the bed shear stress fell below a critical value (τcd). The value of τcd had previously been determined in the laboratory. Efficiency was then calculated as a function of the proportion of the chamber bed for which deposition had been predicted. The second method used the particle tracking facility in Fluent and efficiency was calculated from the proportion of particles that remained within the chamber. The results from the two techniques for efficiency are compared to data collected in a laboratory chamber. Three further simulations were then undertaken in order to investigate the influence of length to breadth ratio on chamber performance. The methodology presented here could be applied to complex geometries and full scale installations.

Improvement of real-scale raceway bioreactors for microalgae production using Computational Fluid Dynamics (CFD)

2021 ◽  
Vol 54 ◽  
pp. 102207
Author(s):  
Cristian Inostroza ◽  
Alessandro Solimeno ◽  
Joan García ◽  
José M. Fernández-Sevilla ◽  
F. Gabriel Acién
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Computational Fluid Dynamics Cfd ◽  
Real Scale

scholarly journals Design of Novel Flash Ironmaking Reactors for Greatly Reduced Energy Consumption and CO2 Emissions

Metals ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 332
Author(s):  
Hong Yong Sohn ◽  
De-Qiu Fan ◽  
Amr Abdelghany
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Large Diameter ◽  
Reduction Reaction ◽  
The Novel ◽  
Height Ratio ◽  
Fine Iron ◽  
Computational Fluid Dynamics Cfd ◽  
High Reduction ◽  
Iron Ore Concentrate

The development of a novel ironmaking technology based on fine iron ore concentrate in a flash reactor is summarized. The design of potential industrial reactors for flash ironmaking based on the computational fluid dynamics technique is described. Overall, this simulation work has shown that the size of the reactor used in the novel flash ironmaking technology (FIT) can be quite reasonable vis-à-vis the blast furnaces. A flash reactor of 12 m diameter and 35 m height with a single burner operating at atmospheric pressure would produce 1.0 million tons of iron per year. The height can be further reduced by either using multiple burners, preheating the feed gas, or both. The computational fluid dynamics (CFD)-based design of potential industrial reactors for flash ironmaking pointed to a number of features that should be incorporated. The flow field should be designed in such a way that a larger portion of the reactor is used for the reduction reaction but at the same time excessive collision of particles with the wall must be avoided. Further, a large diameter-to-height ratio that still allows a high reduction degree should be used from the viewpoint of decreased heat loss. This may require the incorporation of multiple burners and solid feeding ports.

scholarly journals Morphological and Hemodynamic Changes during Cerebral Aneurysm Growth

2021 ◽  
Vol 11 (4) ◽  
pp. 520
Author(s):  
Emily R. Nordahl ◽  
Susheil Uthamaraj ◽  
Kendall D. Dennis ◽  
Alena Sejkorová ◽  
Aleš Hejčl ◽  
...  
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Kinetic Energy ◽  
Swirling Flow ◽  
Morphological Changes ◽  
Cerebral Aneurysms ◽  
Patient Specific ◽  
Aneurysm Wall ◽  
Aneurysm Growth ◽  
Computational Fluid Dynamics Cfd

Computational fluid dynamics (CFD) has grown as a tool to help understand the hemodynamic properties related to the rupture of cerebral aneurysms. Few of these studies deal specifically with aneurysm growth and most only use a single time instance within the aneurysm growth history. The present retrospective study investigated four patient-specific aneurysms, once at initial diagnosis and then at follow-up, to analyze hemodynamic and morphological changes. Aneurysm geometries were segmented via the medical image processing software Mimics. The geometries were meshed and a computational fluid dynamics (CFD) analysis was performed using ANSYS. Results showed that major geometry bulk growth occurred in areas of low wall shear stress (WSS). Wall shape remodeling near neck impingement regions occurred in areas with large gradients of WSS and oscillatory shear index. This study found that growth occurred in areas where low WSS was accompanied by high velocity gradients between the aneurysm wall and large swirling flow structures. A new finding was that all cases showed an increase in kinetic energy from the first time point to the second, and this change in kinetic energy seems correlated to the change in aneurysm volume.

Sign in / Sign up

Export Citation Format

Share Document