Key technology for the transmission system of wind turbine condition monitoring is researched in this paper. It gives a summary overview, including monitoring methods, signal processing methods and state recognition technology, data acquisition and transmission technology, programming languages. Understanding of the progress of the field is to provide technical reference and research inspiration for insiders.
A high-speed data acquisition card using USB 3.0 interface has been designed in order to solve the problem that traditional data acquisition card could not take both data transmission bandwidth and easy connection with PC into account. The data acquisition card controlled the dual-channel 12-bit 20Msps ADC for asynchronous parallel sampling using FPGA as core control module, which made the sampling rate up to 40Msps. The sampled data which was processed by FPGA transferred synchronous from FIFO interface to PC via USB controller. The basic structure of hardware and the basic design method for software and firmware were given in this paper, in which how to use FPGA to realize FIFO was elaborated in detail. The timing simulation of using asynchronous parallel A/D conversion technology and using ADC device of 40Msps sampling rate for FIFO internal data transmission were simulated respectively, thus verified the reliability of asynchronous parallel A/D conversion.
NOVEL DATA ACQUISITION METHOD FOR INTERFERENCE SUPPRESSION IN DUAL-CHANNEL SAR