Monetization of Carbon Dioxide and Oil and Gas Production Brine: From Waste to Usable Products

2020 ◽  
Author(s):  
Foster Kholi
2020 ◽  
Vol 129 (4) ◽  
pp. 14-18
Author(s):  
L. A. Magadova ◽  
◽  
K. A. Poteshkina ◽  
V. D. Vlasova ◽  
M. S. Pilipenko ◽  
...  

The effect of carbon dioxide corrosion on the pipeline transport system and its protection methods are considered in this article. The corrosion inhibitors represented by imidazoline-based compositions and industrial samples of corrosion inhibitors are used as protective reagents, and the model of produced water saturated with carbon dioxide is used as an aggressive environment. The protective properties of inhibitors and the corrosion rate were evaluated by gravimetric analysis. The paper presents the results of the study of industrial samples and inhibitory compositions developed on the basis of the REC “Promyslovaya himiya”. According to the results of the work, a positive effect of additives of nonionic surfactants on the protective properties of inhibitors was noted.


2021 ◽  
Author(s):  
Valeriya Eduardovna Tkacheva ◽  
Andrey Nicolaevich Markin ◽  
Ignaty Andreevich Markin ◽  
Alexandr Yuryevich Presnyakov

Abstract Complications associated with a corrosive environment, according to Rosneft's data as of 01.01.2020, are among the prevailing at oil and gas production facilities and rank fourth among other factors complicating production - 12% the complicated mechanized wells. Failures due to corrosion are the second largest complicating factors. Based on the results of approbation, the article proposes a method for calculating the maximum rate of local carbon dioxide corrosion, applicable in oilfield conditions, including to complicated stocks of oil wells and pipelines of oil gathering systems. Based on the approbation results, a method for calculating the maximum rate of local carbon dioxide corrosion, applicable in oilfield conditions, including to complicated stocks of oil wells and oil gathering pipelines systems is proposed in the article. The proposed technique is realizable according to the results one of "traditional" methods the corrosion monitoring - weight (or gravimetric). The approbation results and application possibility the technique in the pilot tests process in assessing the protective ability of corrosion inhibitors and the selection the effective dosages in relation to local damages, which are the main cause the oilfield equipment failures according the factor "Corrosive aggressiveness" (one of the complicating factors in terms of gradation, adopted in the Rosneft Company regulations). On practical examples the oilfield equipment operation, the results of corrosion monitoring and the summary statistics the corrosive stock of wells (using the example of an oil Company), the current situation with respect to this type of complication and relevance the issue under consideration is shown.


2019 ◽  
Vol 121 ◽  
pp. 01019
Author(s):  
Aleksandr Yusupov

In Gazprom dobycha Urengoy LLC, as in other oil-and-gas production enterprises, there are problems of increased equipment wear due to corrosion. A special role there plays CO2 corrosion. Despite the homogeneity of the extracted fluid and even chemical composition of the working medium, the nature and intensity of corrosion damage to pipelines and equipment varies over a wide range, due to different thermobaric parameters of well operation. To determine parameters influencing the rate of corrosion most different methods of statistical analysis were used. The paper provides a methodology for compiling a mathematical model and assessing its reliability. As a result, the equation of carbon dioxide corrosion in relation to the conditions of Achimov deposits of Urengoy oil, gas and condensate field was obtained. The type of the obtained equation was chosen according to the model of the classical de Waard-Milliams carbon dioxide corrosion equation. The model proposed by the authors describes the processes of carbon dioxide corrosion more reliably than the de Waard-Milliams equation does. The disadvantage of the developed model is that it does not reliably describe the speed of corrosion in wells with corrosion rates, significantly exceeding the average values for all wells studied.


Sign in / Sign up

Export Citation Format

Share Document