An investigation of the mechanical properties of ternary blend cement pastes containing a large amount of cement kiln dust

2021 ◽  
Vol 0 (0) ◽  
pp. 0-0
Author(s):  
soher hashish ◽  
Doaa Abdel Monem Ahmed ◽  
sheren ragae
HBRC Journal ◽  
2015 ◽  
Vol 11 (1) ◽  
pp. 1-6 ◽  
Author(s):  
Mostafa Abd El-Mohsen ◽  
Ahmed M. Anwar ◽  
Ihab A. Adam

Author(s):  
Nawdar Sabir Faraj ◽  
Mahdi Osman Hassun

There have been many efforts in reusing Cement Kiln Dust (CKD), a by-product of cement manufacturing, in various areas of civil works. These efforts have been made due to the necessity of the material for proper disposal, because of its very fine texture and the fact that if not handled properly, it will be harmful to human health and the environment. Numerous studies have been conducted to investigate the effects of incorporating CKD in concrete as an approach of reusing it. In the current study, the effect of using cement kiln dust on the mechanical properties of concrete as a partial replacement of cement was reviewed. The investigated mechanical properties were compressive strength for the curing ages of 7 and 28 days and tensile and flexural strengths, modulus of elasticity, and water absorption for the curing age of 28 days. It was concluded that replacing cement with CKD leads to detrimental effects on all mechanical properties of concrete. There were sufficient amount of data to establish correlations between the amount of cement replacement with CKD, and its effect on all mechanical properties of concrete except for water absorption. Regression analyses were performed and model equations with acceptably high R2s were prepared. The optimal CKD content regarding all mechanical properties was concluded to be 10% by the cement weight, at which 7 and 28 days compressive strengths, 28 days tensile and flexural strengths, and elastic modulus decreased by amounts of 11%, 12%, 8%, 9%, and 8% respectively.


2021 ◽  
Author(s):  
Abbas Al-Hdabi ◽  
Mohammed Al-Jumaili ◽  
Huda Abdulzahra

AbstractCold asphalt emulsion mixtures are produced at ambient temperature and it have several advantages i.e., energy savings, safety and reducing CO2 emission during manufacturing and construction, reduction of adverse environmental impact. Cement kiln dust is a fine powdery substance with appearance similar to Portland cement that is generated as a by-product material of cement manufacturing industry. The aim of this research is addition of cement kiln dust instead of Portland cement as filler in asphalt emulsion mixtures. Cement kiln dust was added with 2, 4, 6, and 8% from total weight of aggregate to improve the mechanical properties and durability of this mixture. The results were very positive and encouraging, due to the improvement of the mechanical properties and durability of the mixtures.


the actual increase in global industrial production and manufacturing, produces a continuous increase in amount of industrial waste and continues to emit an all-time high amount of air pollutants and greenhouse gas emissions. To fight and mitigate these phenomena, proper Waste Management became the pillar of most environmental strategies worldwide. By reduction of consumption, re-use of goods and recycling of products, waste management aims to preserve the resources and to protect the environment. The Cement industry is one of the most important industrial sectors for society development; however it also has significant negative environmental impacts due to its emissions and production of waste. Cement kiln dust (CKD) is an industrial waste or by product which results from cement manufacturing. CKD is fine grained, solid, highly alkaline particulate material chiefly composed of oxidized, anhydrous, micron-sized particles collected from electrostatic precipitators during the production of cement clinker. This research examines the effects of using large amounts of CKD to replace the cement content in the fabrication of solid cement bricks. It is triggered by the quadruple objectives of reducing the amount of cement consumption, disposing efficiently of its industrial waste and producing economic bricks with safe strength. The purpose of this paper is to assess the properties of solid cement bricks containing different amounts of CKD. Cement bricks produced using different amounts of CKD were tested to find their properties and final comparison has been made to identify the effect of using different CKD/Cement ratio on the performance of bricks compared to the reference specimen produced using cement only with no CKD. For the brick mixes, Ordinary Portland cement (OPC), with two cement content of 200kg/m3 and 250kg/m3 were used throughout this investigation. The physical properties; unit weight, water absorption and mechanical properties; compressive strength, flexural strength, of the produced bricks were determined. Results showed that partial replacement of OPC with CKD reduces the brick compressive strength by 18% to 23% for CKD/OPC ratio of 30% and by 36% for CKD/OPC ratio of 50% and in all cases the strength remains largely higher than the standard limit for load bearing bricks.


2018 ◽  
Vol 761 ◽  
pp. 23-26 ◽  
Author(s):  
Eva Štěpánková ◽  
Lukáš Kalina ◽  
Vlastimil Bílek Jr. ◽  
Eva Bartoníčková

This paper deals with the mechanical properties and phase study of alkali activated blast furnace slag and by-pass cement kiln dust mixture. The by-pass cement kiln dust (CKD) solves the problem with significant shrinkage of alkali activated materials which is considerably limiting their practical applications. The mechanism of action of CKD in alkali activated matrix has been investigated as well as its optimal dosage in the means of mechanical properties. The reaction products during the hydration process were characterized by X-ray powder diffraction.


Author(s):  
George Uwadiegwu Alaneme ◽  
Imoh Christopher Attah ◽  
Roland Kufre Etim ◽  
Mark Uzochukwu Dimonyeka

2021 ◽  
Vol 47 (1) ◽  
pp. 19-30
Author(s):  
Bouzeroura-Mansour

Recycling industrial by-product materials waste has become an attractive topic of materials research in civil engineering. These industrial by-product materials waste must be managed responsibly to insure a clean environment. Our research was conducted with the aim of investigating the effect of the addition of two industrial by product materials waste: metal milling waste (F) and cement kiln dust (CKD) in cement paste/mortar, as well as how to assess the influence of CKD substitution on the mechanical properties of cement pastes to create a new hydraulic binder based on partial replacement. An experimental program was conducted on samples of cement paste prepared at three CKD content (5%, 10%, 15% wt. of cement) and new mortars were prepared by: partial replacement of ordinary Portland cement by CKD at 5% by mass; and the simple addition of metal milling waste at three different percentages of (10%, 20%, 30% wt. of binder). Chemical, Micro structural analysis and mineralogical analysis have been carried out using XRD and FT-IR techniques, the mechanical strength, shrinkage, swelling, setting times, were analyzed.<br/> Test results after a 28-day hardening period indicated that when the increase in the CKD replacement, the expansion obtained in the mixed cement pastes increase and the initial and final setting time decreases. The improvement of the strength of cement kiln dust (CKD) in the mixed cement pastes is low, it was found that adding 5% of cement weight CKD is the appropriate percentage for utilizing in the manufacturing of mortars. the addition of metal milling wastes in mortars leads to a considerable improvement of mechanical strengths compared to the reference mortar. The strength increases when the percentage of Metal milling wastes additions increases until an optimum (20%).


Sign in / Sign up

Export Citation Format

Share Document