Using a new pressure index for water distribution systems upgradation improvement evaluation

2016 ◽  
Vol 16 (5) ◽  
pp. 1339-1348
Author(s):  
Savalan Pour Akbarkhiavi ◽  
Monzur Alam Imteaz
Keyword(s):  
Distribution Systems ◽  
Water Distribution ◽  
Potable Water ◽  
Water Distribution Systems ◽  
Water System ◽  
Point Of View ◽  
Level Of Service ◽  
Time Interval ◽  
Network Systems ◽  
Pressure Index

Potable water distribution systems (WDS) require upgrade strategies based on a pre-defined time interval which is identified by the responsible water authorities. The main goal of a potable water system upgrade is maintaining the standard and acceptable level of service after the occurrence of increases in the serviced population, asset ageing, and/or development of the serviced area. Defining the level of service varies by location according to the codes and regulations adopted by the water authority. In general, two main factors are notable in planning of WDS upgrade strategies: (1) the ‘level of service’ and (2) the ‘upgrade cost’. In the presented paper, a new index has been introduced to evaluate the level of service for WDS from a pressure point of view. The new index that is presented in this paper is named the ‘Pressure Index (PI)’, and incorporates a number of water connections for five different pressure regimes. As a case study, three existing water network systems in the Castlemaine township area, located in central Victoria, Australia, have been investigated and the relationship between the ‘upgrade costs’ and improvement in PI factors is presented.

scholarly journals MUWS (Microbiology in Urban Water Systems) – an interdisciplinary approach to study microbial communities in urban water systems

2010 ◽  
Vol 3 (2) ◽  
pp. 91-99 ◽  
Author(s):  
P. Deines ◽  
R. Sekar ◽  
H. S. Jensen ◽  
S. Tait ◽  
J. B. Boxall ◽  
...  
Keyword(s):  
Microbial Ecology ◽  
Distribution Systems ◽  
Water Distribution ◽  
Potable Water ◽  
Water Distribution Systems ◽  
Water Systems ◽  
Urban Water ◽  
Infrastructure Systems ◽  
Urban Water Systems ◽  
Sewer Networks

Abstract. Microbiology in Urban Water Systems (MUWS) is an integrated project, which aims to characterize the microorganisms found in both potable water distribution systems and sewer networks. These large infrastructure systems have a major impact on our quality of life, and despite the importance of these systems as major components of the water cycle, little is known about their microbial ecology. Potable water distribution systems and sewer networks are both large, highly interconnected, dynamic, subject to time and varying inputs and demands, and difficult to control. Their performance also faces increasing loading due to increasing urbanization and longer-term environmental changes. Therefore, understanding the link between microbial ecology and any potential impacts on short or long-term engineering performance within urban water infrastructure systems is important. By combining the strengths and research expertise of civil-, biochemical engineers and molecular microbial ecologists, we ultimately aim to link microbial community abundance, diversity and function to physical and engineering variables so that novel insights into the performance and management of both water distribution systems and sewer networks can be explored. By presenting the details and principals behind the molecular microbiological techniques that we use, this paper demonstrates the potential of an integrated approach to better understand how urban water system function, and so meet future challenges.

Fungi from Potable Water: Interaction with Chlorine and Engineering Effects

1988 ◽  
Vol 20 (11-12) ◽  
pp. 153-159 ◽  
Author(s):  
William D. Rosenzweig ◽  
Wesley O. Pipes
Keyword(s):  
Water Samples ◽  
Distribution Systems ◽  
Water Distribution ◽  
Potable Water ◽  
Fungal Spores ◽  
Water Distribution Systems ◽  
Water Systems ◽  
Storage Tanks ◽  
Water Interaction ◽  
Low Concentrations

In recent years various types of imperfect fungi have been isolated from water systems. Fungal spores and mycelia can be inactivated by low concentrations of chlorine in the laboratory but survive in some habitats in water distribution systems. This report describes a field study which provides evidence that some types of fungi are able to grow in water distribution systems. Replicate samples from private residences were used to demonstrate that fungal densities are sometimes much greater than the levels which could be explained by adventitious spores. The microbiological content of water samples from fire hydrants was often significantly different from that of water samples from nearby private residences. The treated water input to distribution systems was found to be significantly lower in fungus content than water from private residences. Elevated storage tanks open to the atmosphere appear to be significant sources of fungal input to some systems.

scholarly journals MUWS (Microbiology in Urban Water Systems) – an interdisciplinary approach to study microbial communities in urban water systems

2010 ◽  
Vol 3 (1) ◽  
pp. 43-64
Author(s):  
P. Deines ◽  
R. Sekar ◽  
H. S. Jensen ◽  
S. Tait ◽  
J. B. Boxall ◽  
...  
Keyword(s):  
Microbial Ecology ◽  
Distribution Systems ◽  
Water Distribution ◽  
Potable Water ◽  
Water Distribution Systems ◽  
Water Systems ◽  
Urban Water ◽  
Microbiological Methods ◽  
Urban Water Systems ◽  
Sewer Networks

Abstract. Microbiology in Urban Water Systems (MUWS) is an integrated project, which aims to characterize the microorganisms found in both potable water distribution systems and sewer networks. These large infrastructure systems have a major impact on our quality of life, and despite the importance of these systems as major components of the water cycle, little is known about their microbial ecology. Potable water distribution systems are large, highly interconnected and dynamic, and difficult to control. Sewer systems are also large and subject to time varying inputs and demands. Their performance also faces increasing loading due to increasing urbanization and longer-term environmental changes. Therefore, understanding the link between microbial ecology and any potential impacts on short or long-term engineering performance is important. By combining the strengths and research expertise of civil-, biochemical engineers and molecular microbial ecologists, we aim to link the abundance and diversity of microorganisms to physical and engineering variables so that novel insights into the ecology of microorganisms within both water distribution systems and sewer networks can be explored. By presenting the details of this multidisciplinary approach, and the principals behind the molecular microbiological methods and techniques that we use, this paper will demonstrate the potential of an integrated approach to better understand urban water system function and so meet future challenges.

scholarly journals Risk-based sensor placement methods for burst/leak detection in water distribution systems

2017 ◽  
Vol 17 (6) ◽  
pp. 1663-1672 ◽  
Author(s):  
E. Forconi ◽  
Z. Kapelan ◽  
M. Ferrante ◽  
H. Mahmoud ◽  
C. Capponi
Keyword(s):  
Distribution Systems ◽  
Water Distribution ◽  
Social Economic ◽  
Water Distribution Systems ◽  
Water System ◽  
Water Distribution Network ◽  
Leak Detection ◽  
Optimal Placement ◽  
Water Volume ◽  
The Impact

Abstract The optimal placement of sensors for burst/leak detection in water distribution systems is usually formulated as an optimisation problem. In this study three different risk-based functions are used to drive optimal location of a given number of sensors in a water distribution network. A simple function based on likelihood of leak non-detection is compared with two other risk-based functions, where impact and exposure are combined with the leak detection likelihood. The impact is considered proportional to the demand water volume while the exposure is related to the importance of the connections and it is evaluated in social, economic or safety terms. The methods are applied to a district metered area of the Harrogate network by means of a modified EPANET model, to take into account the pressure-driven functioning conditions of the system. The results show that the exposure can lead to a different sensor location ranking with respect to other criteria used and hence the proposed methodology can represent a useful tool for water system managers to distribute the sensors in the network, complying with hydraulic, social and economical requirements.

Sign in / Sign up

Export Citation Format

Share Document