Microbiological safety of a small water distribution system: evaluating potentially pathogenic bacteria using advanced sequencing techniques

2017 ◽  
Vol 18 (2) ◽  
pp. 391-398 ◽  
Author(s):  
A. M. M. Batista ◽  
P. Meynet ◽  
G. P. P. Garcia ◽  
S. A. V. Costa ◽  
J. C. Araujo ◽  
...  

Abstract This study evaluated the microbiological safety of the water distribution system of a city in the state of Minas Gerais (Brazil), population 120,000 inhabitants. During the study, the city suffered a severe drought that had a significant impact on water availability and quality in the river that supplies water to the city. Samples (2 liters) were collected from the distribution system over a period of six months, which included wet and dry months, from three points: the point with the lowest altitude in the distribution network, the farthest point from the water treatment works, and an intermediate point. Free chlorine was measured in situ using a Hach kit. DNA was extracted using a FastDNA Spin Kit Soil (Qbiogene). Advanced sequencing techniques (Ion Torrent) were used to identify and quantify the relative abundance of potentially pathogenic bacteria present in the samples. Coliforms and Escherichia coli, indicators currently used worldwide to assess microbiological safety of drinking water, were measured on all samples using an enzyme substrate method (ONPG-MUG Colilert®). Next generation sequencing results retrieved 16SrRNA sequences of E. coli and some potentially pathogenic bacteria, even in the presence of free chlorine. Operational taxonomic units related to pathogenic bacteria were present in all samples from the drinking water distribution system (DWS) and, in general, at high relative abundance (up to 5%). A total of 19 species related to bacterial pathogens were detected. Inadequate operational practices that could affect the microbiological safety of the DWS were identified and discussed. The current paper is the first to evaluate the community of potentially pathogenic bacteria in a real DWS.

Author(s):  
Abrar Muslim ◽  
Qin Li ◽  
Moses O. Tadé

An ideal drinking water distribution system (DWDS) must supply safe drinking water with free chlorine residual (FCR) in the form of HOCl and OCl- at a required concentration level. The FCR as a disinfectant decreases over time due to chemical reactions in the bulk phase and at the pipe wall in the DWDS. In order to supply drinking water with the FCR concentration within the safety range of 0.2-0.6 mg/l at the points of water consumption, it is important to develop a dynamic model of the FCR using a discrete time-space model (DTSM) that accounts for free chlorine transport in the axial direction by convection, diffusion and the decay kinetic. A DTSM has been developed using Finite Difference Method (FDM) to predict the FCR in single pipes in the DWDS. The DTSM has been computed using Matlab 7.0.1 and tested with step inputs and rectangular pulse inputs to estimate the FCR at any point in the pipes over time. Data found in the literature have been used to validate the DTSM. The modelling and simulation study shows that the water velocity significantly affects the FCR concentration distribution along the pipe. Due to the fluctuation of the drinking water demand, a model-based adaptive chlorine dosing scheme is proposed to control the proper injection of chlorine.


2020 ◽  
Author(s):  
Mireia Plà-Castellana ◽  
Julia Roselló-Cano ◽  
Alícia Maestro ◽  
Jordi Raich-Montiu ◽  
Miquel Paraira

<p>Monitoring critical drinking water points in the water distribution system of Barcelona (Catalonia, Spain) is an increasing concern. The control of several quality parameters as free chlorine, total organic carbon (TOC), conductivity, turbidity, temperature, colour, pressure and flow are necessary to ensure a supply of safe and clean drinking water to consumers.</p><p>The aim of this project is to investigate the consequences of alterations detected in the water distribution system, to find the focus of occurrences and controlling them to provide a better drinking water quality to Barcelona citizens.</p><p>Barcelona procures drinking water to its citizens via two main water sources: Ter and Llobregat Rivers. They have intrinsic quality differences and they must be treated in different ways. With the purpose of controlling and investigating how these differences impact the water quality supplies, two s::can sensor systems were installed in the Poblenou District (Barcelona). The first one (nano::station) was installed in a drinking water distribution pipe, and the second one (pipe::scan) was installed in a domestic water supply network. Both systems were situated in the same drinking water confluence sector in order to compare the data recorded and to visualise water quality changes. More than 20 events were recorded, analysed and classified according to whether the alteration was due to an occasional event in the domestic water supply or to an external incident from the water distribution system. Some detected events were related to an increase of temperature, a rise of water demand, the water origins or changes in pressure.</p><p>One important event recorded by the installed probes was an increase of temperature, directly associated with an augment of total organic matter (TOC) at the beginning of summer (June 2018). A great rise of TOC would be the causer of high consumption of free chlorine that it could be hazardous for human health if there is not enough chlorine dissolved in water. Due to this temperature increment (from 15°C to 23°C in a few days), the minimum level of chlorine (less than 0.2 mg/L) was registered in the Poblenou Sector.</p><p>Nano::station and pipe::scan sensor systems are excellent tools as on-line water quality controllers. These kinds of sensors can record variations occurring every two minutes, giving a great perception of the events that are happening at different points of the drinking water city-wide network.</p>


2008 ◽  
Vol 8 (4) ◽  
pp. 421-426
Author(s):  
J. Menaia ◽  
M. Benoliel ◽  
A. Lopes ◽  
C. Neto ◽  
E. Ferreira ◽  
...  

Concerns arise from the possible occurrence of pathogens in drinking water pipe biofilms and storage tank sediments. In these studies, biofilm samples from pipes and sediments from storage tanks of the Lisbon drinking water distribution system were analyzed. Protein determinations and heterotrophic counts on pipe biofilm samples were used to assess the Lisbon network sessile colonization intensity and distribution. Indicator and pathogenic microorganisms were analyzed in pipe biofilm samples, as well as in storage tanks biofilm and sediments, by using cultural methods and PCR, to assess risks. Results have shown that the Lisbon network sessile colonization is relatively weak in intensity. In addition, no meaningful hazards were apparent for both the network biofilm and the storage tanks biofilm and sediments.


2009 ◽  
Vol 43 (20) ◽  
pp. 5005-5014 ◽  
Author(s):  
Jeffrey G. Szabo ◽  
Christopher A. Impellitteri ◽  
Shekar Govindaswamy ◽  
John S. Hall

2007 ◽  
Vol 2007 (1) ◽  
pp. 449-467
Author(s):  
Stacia L. Thompson ◽  
Elizabeth Casman ◽  
Paul Fischbeck ◽  
Mitchell J. Small ◽  
Jeanne M. VanBriesen

Sign in / Sign up

Export Citation Format

Share Document