scholarly journals Wastewater treatment from the biodiesel production using waste cooking oil by electrocoagulation: a multivariate approach

2019 ◽  
Vol 79 (12) ◽  
pp. 2366-2377 ◽  
Author(s):  
Hanife Sari-Erkan
Keyword(s):  
Wastewater Treatment ◽  
Current Density ◽  
Oxygen Demand ◽  
Waste Cooking Oil ◽  
Biodiesel Production ◽  
Optimum Conditions ◽  
Efficient Treatment ◽  
Cooking Oil ◽  
Initial Ph ◽  
Removal Efficiencies

Abstract This study mainly focuses on the process of electrocoagulation (EC) for the wastewater treatment from biodiesel production using waste cooking oil. The effects of current density, initial pH and electrolysis time on the EC process using aluminum (Al) and iron (Fe) electrodes were investigated for removal of chemical oxygen demand (COD). The COD removal efficiencies were found to be 62.7% and 63.4% at optimum conditions for Al (current density: 43 mA/cm2, pH: 5, time: 21 min) and Fe (current density: 47 mA/cm2, pH: 7.7, time: 30 min) electrodes, respectively. At these optimum conditions, the removal efficiencies of oil & grease, total phosphorus (TP), orthophosphate (PO4-P) and total suspended solids (TSS) were determined respectively to be above 89.9%, 98.9%, 99.5%, 86.7% for Al electrodes and 90.8%, 98.5%, 97.6%, 89.6% for Fe electrodes. Total operating costs were also found to be 6.43 €/m3 and 7.01 €/m3 for Al and Fe electrodes, respectively. The results indicate that the EC process using both types of electrodes seems to ensure an efficient treatment of biodiesel wastewater in terms of oil & grease and TP.

Thermodynamic and kinetic approach of biodiesel production from waste cooking oil using nano-catalysts

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Saima Noreen ◽  
Iqra Sahar ◽  
Nasir Masood ◽  
Munawar Iqbal ◽  
Muhammad Zahid ◽  
...  
Keyword(s):  
Waste Cooking Oil ◽  
Biodiesel Production ◽  
Precipitation Method ◽  
Optimum Conditions ◽  
Reaction Conditions ◽  
Cooking Oil ◽  
Used Cooking Oil ◽  
Optimum Reaction ◽  
Co Precipitation ◽  
Nano Catalysts

Abstract This study focusses on the production of biodiesel by reacting the heterogeneous based nano-catalysts with used cooking oil in the presence of methanol. The CZO nanoparticles (NPs) were synthesized by co-precipitation method and characterized by different techniques. Biodiesel was characterized by the gas chromatograph (GC) and Fourier Transform Infra-red Spectroscopy (FTIR). Optimum conditions for the maximum biodiesel yield (90%) were 0.2% (w/w) catalyst dose, 3:1 methanol to oil ratio, 50 °C reaction temperature, 150 min reaction time and 136 rpm stirring speed. The kinetic modeling and the thermodynamic factors like enthalpy (ΔH), activation energy (Ea), entropy (ΔS) and free energy (ΔG) were operated on all the data. Mean and standard deviation was used for analysis of data. The results indicate the maximum biodiesel yield under the optimum reaction conditions, which is promising to reduce the pollution such as air pollution and greenhouse effect for sustainable environmetal development.

Biodiesel Production from Waste Cooking Oils by Using Immobilized Microorganisms as Whole Cell Catalysts

2014 ◽  
Vol 1070-1072 ◽  
pp. 107-111
Author(s):  
Gui Xiong Zhou ◽  
Guan Yi Chen ◽  
Bei Bei Yan
Keyword(s):  
Water Content ◽  
Waste Cooking Oil ◽  
Biodiesel Production ◽  
Molar Ratio ◽  
Catalyst Loading ◽  
Optimum Conditions ◽  
Immobilized Cell ◽  
Whole Cell ◽  
Cooking Oil ◽  
The Cost

The main hurdle to the commercialization of lipase-catalyzed production of biodiesel is the cost of enzyme and feedstock oil. In order to reduce the cost of biodiesel production, the lipase-producing whole cells ofAspergillus nigerand immobilized onto biomass support particles (BSPs) were used for the production of biodiesel from waste cooking oil. This article studies this technological process, focusing on optimization of several process parameters, including the water content, catalyst loading and molar ratio of methanol to waste cooking oil. The results indicate that the water content of 20%(based on oil weight), BSPs-immobilized cell catalysts of 6% and methanol/oil molar ratio of 4:1 are the optimum conditions for biodiesel production from waste cooking oil. Under the optimum conditions, the maximum methyl ester (ME) content in the reaction mixture reaches 84.7 wt.% after 72 h. In addition, the whole-cell biocatalysts showed excellent reusability, retaining 73% productivity after 6 batches. Our results suggest that whole-cell A. niger immobilized on BSP is a promising biocatalyst for biodiesel production from waste cooking oil.

Study on the Decolorization of Biodiesel from Waste Cooking Oil

2011 ◽  
Vol 347-353 ◽  
pp. 3781-3787
Author(s):  
Guang Rui Liu ◽  
Guan Yi Chen
Keyword(s):  
Renewable Resources ◽  
Bleaching Earth ◽  
Waste Cooking Oil ◽  
Environmental Benefits ◽  
Biodiesel Production ◽  
Optimum Conditions ◽  
Cooking Oil ◽  
Quality Product ◽  
Dark Colour ◽  
Environmental Consideration

Biodiesel has become more attractive recently because of its environmental benefits, and the fact that it is derived from renewable resources. Recently, the acidic oil and waste cooking oil were the main resources for the biodiesel production, due to the economical and environmental consideration. However, the product obtained from the transesterification with dark colour. Activated carbon (ACN), activated clay (ACY), activated bleaching earth (ABE), attapulgite (ATE) were employed to refine the undecolored biodiesel. Among all studied decolorants, activated clay exhibited higher activity and more economically competitive. In addition, decoloring process of undecolored biodiesel by activated clay was performed; the optimum conditions were obtained as decoloring temperature 60°C, time 60 min and dosage of activated clay 3 wt. % at atmospheric pressure. Besides, the water content of biodiesel should be below 1 wt. % while ACY was used as decolorant. This paper compared contents and features of decolorization by ACY and rectification under vacuum. The results indicated that higher decolorization ratio(DR) and better quality product will be achieved through rectification, while the decolorization by ACY method should be an proper choice if the biodiesel solded by mixing with diesel fuel.

Synthesis and Characterization of Heterogeneous Solid Acid Catalyst from Alstonia Scolaris Stalks for Biodiesel Production using Waste Cooking Oil

2020 ◽  
Vol 10 ◽  
Author(s):  
Charishma Venkata Sai Anne ◽  
Karthikeyan S. ◽  
Arun C.
Keyword(s):  
Reaction Time ◽  
Solid Acid ◽  
Solid Acid Catalyst ◽  
Acid Catalyst ◽  
Waste Cooking Oil ◽  
Biodiesel Production ◽  
Wood Biomass ◽  
Waste Wood ◽  
X Ray ◽  
Cooking Oil

Background: Waste biomass derived reusable heterogeneous acid based catalysts are more suitable to overcome the problems associated with homogeneous catalysts. The use of agricultural biomass as catalyst for transesterification process is more economical and it reduces the overall production cost of biodiesel. The identification of an appropriate suitable catalyst for effective transesterification will be a landmark in biofuel sector Objective: In the present investigation, waste wood biomass was used to prepare a low cost sulfonated solid acid catalyst for the production of biodiesel using waste cooking oil. Methods: The pretreated wood biomass was first calcined then sulfonated with H2SO4. The catalyst was characterized by various analyses such as, Fourier-transform infrared spectroscopy (FTIR), Scanning Electron Microscopy (SEM), Energy Dispersive X-Ray Spectroscopy (EDS) and X-ray diffraction (XRD). The central composite design (CCD) based response surface methodology (RSM) was applied to study the influence of individual process variables such as temperature, catalyst load, methanol to oil molar ration and reaction time on biodiesel yield. Results: The obtained optimized conditions are as follows: temperature (165 ˚C), catalyst loading (1.625 wt%), methanol to oil molar ratio (15:1) and reaction time (143 min) with a maximum biodiesel yield of 95 %. The Gas chromatographymass spectrometry (GC-MS) analysis of biodiesel produced from waste cooking oil was showed that it has a mixture of both monounsaturated and saturated methyl esters. Conclusion: Thus the waste wood biomass derived heterogeneous catalyst for the transesterification process of waste cooking oil can be applied for sustainable biodiesel production by adding an additional value for the waste materials and also eliminating the disposable problem of waste oils.

scholarly journals Locally Sustainable Biodiesel Production from Waste Cooking Oil and Grease Using a Deep Eutectic Solvent: Characterization, Thermal Properties, and Blend Performance

ACS Omega ◽  
2021 ◽  
Vol 6 (13) ◽  
pp. 9204-9212
Author(s):  
Neelam Khan ◽  
Sang H. Park ◽  
Lorraine Kadima ◽  
Carlove Bourdeau ◽  
Evelyn Calina ◽  
...  
Keyword(s):  
Thermal Properties ◽  
Deep Eutectic Solvent ◽  
Waste Cooking Oil ◽  
Biodiesel Production ◽  
Oil And Grease ◽  
Cooking Oil

Lanthanum phosphate foam as novel heterogeneous nanocatalyst for biodiesel production from waste cooking oil

2021 ◽  
Author(s):  
Shahabaldin Rezania ◽  
Zahra Sotoudehnia Korrani ◽  
Mohammad Ali Gabris ◽  
Jinwoo Cho ◽  
Krsihna Kumar Yadav ◽  
...  
Keyword(s):  
Waste Cooking Oil ◽  
Biodiesel Production ◽  
Heterogeneous Nanocatalyst ◽  
Lanthanum Phosphate ◽  
Cooking Oil

Electrochemical Treatment of Simulated Dye Wastewater

2012 ◽  
Vol 441 ◽  
pp. 555-558
Author(s):  
Feng Tao Chen ◽  
San Chuan Yu ◽  
Xing Qiong Mu ◽  
Shi Shen Zhang
Keyword(s):  
Current Density ◽  
Oxygen Demand ◽  
Electrochemical Treatment ◽  
Dye Wastewater ◽  
Electrolysis Time ◽  
Electrochemical Degradation ◽  
Mild Conditions ◽  
Thermal Decomposition Method ◽  
Initial Ph ◽  
Effects Of Ph

The Ti/SnO2-Sb2O3/PbO2 electrodes were prepared by thermal decomposition method and its application in the electrochemical degradation of a heteropolyaromatic dye, Methylene blue (MB), contained in simulated dye wastewater were investigated under mild conditions. The effects of pH, current density and electrolysis time on de-colorization efficiency were also studied. Chemical oxygen demand (COD) was selected as another parameter to evaluate the efficiency of this degradation method on treatment of MB wastewater. The results revealed that when initial pH was 6.0, current density was 50 mA·cm2, electrolysis time was 60 min, Na2SO4 as electrolyte and its concentration was 3.0 g·dm3, the de-colorization and COD removal efficiency can reach 89.9% and 71.7%, respectively.

Sign in / Sign up

Export Citation Format

Share Document