scholarly journals Analytical Plans Supporting The Sludge Batch 8 Glass Variability Study Being Conducted By Energysolutions And Cua's Vitreous State Laboratory

2012 ◽  
Author(s):  
T. B. Edwards ◽  
D. K. Peeler
Author(s):  
R.E. Crang ◽  
M. Mueller ◽  
K. Zierold

Obtaining frozen-hydrated sections of plant tissues for electron microscopy and microanalysis has been considered difficult, if not impossible, due primarily to the considerable depth of effective freezing in the tissues which would be required. The greatest depth of vitreous freezing is generally considered to be only 15-20 μm in animal specimens. Plant cells are often much larger in diameter and, if several cells are required to be intact, ice crystal damage can be expected to be so severe as to prevent successful cryoultramicrotomy. The very nature of cell walls, intercellular air spaces, irregular topography, and large vacuoles often make it impractical to use immersion, metal-mirror, or jet freezing techniques for botanical material.However, it has been proposed that high-pressure freezing (HPF) may offer an alternative to the more conventional freezing techniques, inasmuch as non-cryoprotected specimens may be frozen in a vitreous, or near-vitreous state, to a radial depth of at least 0.5 mm.


2018 ◽  
Vol 51 (2) ◽  
Author(s):  
Sohail Ahmad Jan ◽  
Zabta Khan Shinwari ◽  
Malik Ashiq Rabbani ◽  
Ali Talha Khalil ◽  
Azhar Hussain Shah

2017 ◽  
Vol 139 (5) ◽  
Author(s):  
Sara Benyakhlef ◽  
Ahmed Al Mers ◽  
Ossama Merroun ◽  
Abdelfattah Bouatem ◽  
Hamid Ajdad ◽  
...  

Reducing levelized electricity costs of concentrated solar power (CSP) plants can be of great potential in accelerating the market penetration of these sustainable technologies. Linear Fresnel reflectors (LFRs) are one of these CSP technologies that may potentially contribute to such cost reduction. However, due to very little previous research, LFRs are considered as a low efficiency technology. In this type of solar collectors, there is a variety of design approaches when it comes to optimizing such systems. The present paper aims to tackle a new research axis based on variability study of heliostat curvature as an approach for optimizing small and large-scale LFRs. Numerical investigations based on a ray tracing model have demonstrated that LFR constructors should adopt a uniform curvature for small-scale LFRs and a variable curvature per row for large-scale LFRs. Better optical performances were obtained for LFRs regarding these adopted curvature types. An optimization approach based on the use of uniform heliostat curvature for small-scale LFRs has led to a system cost reduction by means of reducing its receiver surface and height.


2006 ◽  
Vol 32 (2) ◽  
pp. 167-171
Author(s):  
A. S. Nesterov ◽  
D. S. Sanditov ◽  
Yu. V. Agrafonov ◽  
Sh. B. Tsydypov
Keyword(s):  

1998 ◽  
Vol 319 (1-2) ◽  
pp. 3-6 ◽  
Author(s):  
W. Voges ◽  
T. Boller
Keyword(s):  
X Ray ◽  

Sign in / Sign up

Export Citation Format

Share Document